 |
 |
 |
|
Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V
Temperature Range
Ambient +20°C to 210°C
Temperature Distribution Accuracy
± 2.0°C (at 210°C)
- High precision controller allows high performance temperature control and display of CO2 and power discharge
- Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models
- Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models
- Program operation with a maximum of 99 steps, 99 patterns repeatable
- Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes
- Data acquisition from internal test device possible because of cable holes
- Easy system upgrade with various option settings
Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C.
The
Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes:
- 2 x Shelves w/ Brackets
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 1 Year Manufacturer's Warranty
Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Specifications
|
Circulation method
|
Forced air circulation
|
|
External temp. range
|
5~35°C
|
|
Operating temp. range
|
RT+20°C to 210°C
|
|
Temp. control accuracy*¹
|
±0.5°C (at 210°C)
|
|
Temp. distribution accuracy*¹
|
±2.0°C (at 210°C)
|
|
Temp. gradient*¹
|
6°C (at 210°C)
|
|
Temp. rise time*¹
|
~60 min.
|
|
Chamber / Exterior / Insulation
|
Stainless steel / Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish / Glass wool
|
|
Door
|
Single swing (left side)
|
|
Heater / insulating material
|
1.1 kW Stainless pipe heater / Glass wool
|
|
Fan Type
|
Scirocco fan, Capacitor motor
|
|
Fan Motor
|
10W
|
|
Cable hole (right side)
|
33mm I.D. 1pc.
|
|
Exhaust port
|
33mm I.D. 2pcs. (top)
|
|
Observation window
|
Optional
|
|
Temp. controller
|
PID Z control by microprocessor
|
|
Temp. setting method
|
Digital setting by ▲/▼ key
|
|
Temp. / Info display
|
Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution)
|
|
Timer
|
1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation
|
|
Operation function
|
Fixed temperature, Program operation (max.99 steps, up to 99 patterns repeat operationing function), Duration/time select timer operation
function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start)
|
|
Additional functions
|
Power on and Integration time function (up to 65,535 hours), Calibration offset, Time display, Display of power consumption, CO2 discharge and
heater operation, Power failure return mode, User configuration information
|
|
Heater circuit control
|
Triac zero-cross control
|
|
Sensor
|
K-thermocouple double sensor (for temperature control and independent overheat prevention device)
|
|
Safety device
|
Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
|
|
Earth leakage breaker
|
Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
|
|
Independent overheat prevention
|
Set temperature range: 0~250°C
|
|
Internal dimensions*² W×D×H
|
450×450×450 mm
|
|
External dimensions*² W×D×H
|
580×646×860 mm
|
|
Internal capacity
|
90L
|
|
Shelf plate with standard load
|
~15kg/pcs.
|
|
Shelf rest step number / Shelf rest pitch
|
11 steps / 30mm
|
|
Power source 50/60Hz
|
AC115V 10A (with plug)
|
|
Weight
|
~63kg
|
Specification |
Yamato DKN-302C |
Yamato DKN-402C |
Yamato DKN-602C |
Yamato DNE-401 |
Yamato DNE-601 |
Operating temp. range |
Room temp. +10°C~260°C |
Room temp. +10°C~260°C |
Room temp. +10°C~260°C |
Room temp. +20°C to 210°C |
Room temp. +20°C to 210°C |
Temp. adjustment accuracy |
±1°C (at 210°C) |
±1°C (at 210°C) |
±1°C (at 210°C) |
±0.5°C (at 210°C) |
±0.5°C (at 210°C) |
Max. temp. reaching time |
~90 min. |
~90 min. |
~90 min. |
~60 min. |
~70 min. |
Exhaust port |
30mm I.D. x 2 (on top) |
30mm I.D. x 2 (on top) |
30mm I.D. x 2 (on top) |
33mm I.D. 2pcs. (top) |
33mm I.D. 2pcs. (top) |
Temp. setting method |
Digital setting by ▲/▼ key |
Digital setting by ▲/▼ key |
Digital setting by ▲/▼ key |
Digital setting by ▲/▼ key |
Digital setting by ▲/▼ key |
Timer |
1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function |
1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function |
1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function |
1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation |
1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation |
Internal dimensions W×D×H |
300×300×300 mm |
450×450×450 mm |
600×500×500 mm |
450×450×450 mm |
600×500×500 mm |
External dimensions W×D×H |
410×451×670 mm |
560×601×820 mm |
710×651×870 mm |
580×646×860 mm |
730×696×910 mm |
Internal capacity |
27L |
90L |
150L |
90L |
150L |
Power source 50/60Hz |
115V 7.5A (with plug) |
115V 11A (with plug) |
115V 12.5A (with plug) |
AC115V 10A (with plug) |
AC115V 11A (with plug) |
Weight |
~35kg |
~50KG |
~65kg |
~63kg |
~77kg |
|
|
|
 |
|
 |
|
