Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V

Features The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability.

This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment.

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Specifications

Volume	256L (9.04 Cu. Ft.)
Working Temperature Range	At least 10°C above ambient to +250°C
Setting Temperature Range	+20 to +250°C
Setting Resolution (Temperature)	Up to 99.9°C: 0.1°C / From 100°C: 0.5°C
Display Resolution (Actual Values)	0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring
Control Panel	ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function HeatBALANCE	Adjusts heating performance distribution between the upper and lower heating circuits from -50% to +50%
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps for each segment individually
Fresh Air	Pre-heated fresh air admixture via electronically adjustable air flap
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software on a USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control	Independently working, digitally adjustable electronic microprocessor overtemperature monitor TWW, protection class 3.1
Temperature Control (TB)	Mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating 20°C above nominal temperature
AutoSAFETY	Integrated over- and undertemperature protection "ASF", heating switched off in case of overtemperature
Autodiagnostic System	For fault analysis
Alarm	Visual and acoustic
Door	Fully insulated stainless steel doors on two sides
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	9
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	661 lbs
Internal Dimensions (W x H x D)	25.2" x 31.5" x 19.7" (64 x 80 x 50 cm)
External Dimensions (W x H x D)	32.5" x 51.7" x 26.9" (82.5 x 131.4 x 68.2 cm)
Net Weight	Approx. 305 lbs
Electrical Load	115 V, 50/60 Hz, approx. 1800 W