Home > Incubator Capacity > 72L | 2.6 cu ft - 120L | 4.2 cu ft
Sort By:
Page of 1
Yamato IC-403CW General Purpose Incubator with Window 97L, 115V Yamato IC-403CW General Purpose Incubator with Window 97L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0,3kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 450 × 480 × 450 mm
External dimensions WxDxH 560 × 606 × 820 mm
Internal capacity 97L
Inner door Reinforced glass door x 1
Shelf load capacity ~15 kg/pc.
Shelf rest step number 9 steps
Power supply (50/60 Hz) AC115V 4.5A(with plug)
Weight ~45 kg

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $1,220.00
Our Price: $1,147.00
Money Saved: $73.00
Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0,3kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 450 × 480 × 450 mm
External dimensions WxDxH 560 × 606 × 820 mm
Internal capacity 97L
Inner door Reinforced glass door x 1
Shelf load capacity ~15 kg/pc.
Shelf rest step number 9 steps
Power supply (50/60 Hz) AC115V 4.5A(with plug)
Weight ~45 kg

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $1,425.00
Our Price: $1,340.00
Money Saved: $85.00
Memmert IN75 Natural Convection Incubator 74L, 115V Memmert IN75 Natural Convection Incubator 74L, 115V

Setting Temperature Range Min. 5°C above ambient up to +80°C
Working Temperature Range At least 5°C above ambient to +80°C
Volume 74 L (2.6 cu.ft.)
Setting Resolution (temperature) 0.1°C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Convection Natural convection
Fresh Air Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 2
Max. Loading of Chamber 264 lbs
Max. Loading per Shelf 44 lbs
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 15.8 x 22 x 13 inches
Exterior Dimensions (WxHxD) 23 x 37.2 x 20.2 inches
Net Weight Approx. 106 lbs
Electrical Data 115 V (± 10%), 50/60 Hz, approx. 9.6 amps

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $2,443.00
Our Price: $2,443.00
Sale Price: $2,345.28
Money Saved: $97.72
Memmert IN110 Natural Convection Incubator 108L, 115V Memmert IN110 Natural Convection Incubator 108L, 115V

Setting Temperature Range +20 to +80 °C
Working Temperature Range At least 5 above ambient temperature to +80 °C
Volume 108 L (3.8 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 5
Max. Loading of Chamber 385 lbs
Max. Loading per Shelf 44 lbs
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 22 x 18.9 x 15.7 inches
Exterior Dimensions (WxHxD) 29.3 x 34 x 23 inches (d +2.2” door handle)
Net Weight Approx. 106 lbs
Electrical Data 115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $2,883.00
Our Price: $2,883.00
Sale Price: $2,767.68
Money Saved: $115.32
Memmert IF75 Forced Circulation Incubator 74L, 115V Memmert IF75 Forced Circulation Incubator 74L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 74 L (2.6 cu.ft.)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation Program stored in case of power failure
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 6
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 264 lbs
Interior Dimensions (WxHxD) 15.8” x 22” x 13” (40 x 56 x 33 cm)
Exterior Dimensions (WxHxD) 23” x 37.2” x 20.2” (58.5 x 94.4 x 51.4 cm)
Net Weight Approx. 146 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $3,056.00
Our Price: $3,056.00
Sale Price: $2,933.76
Money Saved: $122.24
Memmert IN75plus Natural Convection Incubator 74L, 115V Memmert IN75plus Natural Convection Incubator 74L, 115V

Setting Temperature Range +20 to +80 °C
Working Temperature Range At least 5°C above ambient temperature to +80 °C
Internal Volume 74 L (2.6 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving 2 stainless steel grids, electropolished
Works Calibration Certificate Includes works calibration certificate for +37°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 6
Max. Loading of Chamber 264 lbs (120 kg)
Max. Loading per Shelf 44 lbs (20 kg)
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 15.7 x 22 x 13 inches
Exterior Dimensions (WxHxD) 23 x 37.2 x 20.2 inches (d +2.2” door handle)
Net Weight Approx. 146 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $3,551.00
Our Price: $3,551.00
Sale Price: $3,408.96
Money Saved: $142.04
Memmert IF110 Forced Circulation Incubator 108L, 115V Memmert IF110 Forced Circulation Incubator 108L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 108 L (3.8 cu.ft.)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation Program stored in case of power failure
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 5
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 385 lbs
Interior Dimensions (WxHxD) 22” x 18.9” x 15.8” (56 x 48 x 40 cm)
Exterior Dimensions (WxHxD) 29.3” x 34” x 23” (74.5 x 86.4 x 58.4 cm)
Net Weight Approx. 168 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $3,647.00
Our Price: $3,647.00
Sale Price: $3,501.12
Money Saved: $145.88
Memmert IN110plus Natural Convection Incubator 108L, 115V Memmert IN110plus Natural Convection Incubator 108L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range At least 5°C above ambient temperature to +80 °C
Internal Volume 108 L (3.8 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving 2 stainless steel grids, electropolished
Works Calibration Certificate Includes works calibration certificate for +37°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 5
Max. Loading of Chamber 385 lbs (175 kg)
Max. Loading per Shelf 44 lbs (20 kg)
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 22 x 18.9 x 15.7 inches
Exterior Dimensions (WxHxD) 29.3 x 34 x 23 inches (d +2.2” door handle)
Net Weight Approx. 168 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $3,988.00
Our Price: $3,988.00
Sale Price: $3,828.48
Money Saved: $159.52
Memmert IF75plus Forced Circulation Incubator 74L, 115V Memmert IF75plus Forced Circulation Incubator 74L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 32 L (1.1 cu.ft.)
Temperature Sensor 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent Vent connection with restrictor flap
Documentation Program stored in case of power failure
Temperature Control Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 3
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 132 lbs
Interior Dimensions (WxHxD) 15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm)
Exterior Dimensions (WxHxD) 23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight Approx. 106 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $4,039.00
Our Price: $4,039.00
Sale Price: $3,877.44
Money Saved: $161.56
Memmert IF110plus Forced Circulation Incubator 108L, 115V Memmert IF110plus Forced Circulation Incubator 108L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 108 L (3.8 cu.ft.)
Temperature Sensor 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent Vent connection with restrictor flap
Documentation Program stored in case of power failure
Temperature Control Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 5
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 385 lbs
Interior Dimensions (WxHxD) 22” x 18.9” x 15.8” (56 x 48 x 40 cm)
Exterior Dimensions (WxHxD) 29.3” x 34” x 23” (74.5 x 86.4 x 58.4 cm)
Net Weight Approx. 168 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $4,549.00
Our Price: $4,549.00
Sale Price: $4,367.04
Money Saved: $181.96
Boekel Scientific 165000 Refrigerated Incubator, 115V Boekel Scientific 165000 Refrigerated Incubator, 115V

Touch Screen Refrigerated Incubator

Part Number: 165000 | 115V

Outer Dimensions

W 25.75" x D 27.50" x H 27.25"

Chamber Capacity

4.0 cu ft - 86 BOD Bottles
2 Shelves Included

Materials

Painted Steel Exterior
Thermoformed Plastic Interiors
Stainless Steel Shelves

Cooling Method

Peltier / Thermoelectric + Fan

Heating Method

Dual Resistive + Fan

Control System

Standard and Advanced control of temperature and internal outlet.
Time based control of setpoints with repeat function.
4 Setpoint Ramp

Humidity Method

Stainless Steel Pan

Alarms

User Settable HIgh & Low
Temperature / Humidity Alarm

Timers

User Settable with/without Alarm

User Interface

4.3" Color Touch Screen

Temperature Range

4°C - 60°C @ 20°C ambient

Accuracy

+/- 0.20°C @ 37°C

Stability

+/- 0.10°C @ 37°C

Data Aquisition

Screen Graphing,
USB Download,
Ethernet Communication

Weight

105 lbs

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $5,406.83
Our Price: $5,244.63
Sale Price: $4,489.09
Money Saved: $917.74
Memmert ICO105 CO2 Incubator 107L, 115V Memmert ICO105 CO2 Incubator 107L, 115V

Temperature Range Ambient +5°C to 50°C
Temperature Uniformity ± 0.3°C at 37°C
Volume 107L (3.8 cu. ft.)
CO2 Range 0 to 20%
Sterilization Program 60 minutes at 180°C (without removing the sensors)
Temperature Setting Resolution 0.1°C
Temperature Stability ± 0.1°C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Humidity Control (Standard) Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %
CO2 Control Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
CO2 Setting Accuracy 0.1%
CO2 Stability ± 0.2%
Control Technology TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT The process time does not start until the set temperature is reached
Adjustable Parameters Temperature (Celsius or Fahrenheit), CO2, Timer
Communication Interfaces Ethernet LAN, USB
Documentation Program Stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
AutoSAFETY Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic System Integral fault diagnostics for temperature and CO2
Alarm Visual and acoustic
Heating Concept 6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
Door Fully insulated stainless steel door with 2-point locking (compression door lock)
Shelving 2 perforated stainless steel shelves
Inner Glass Door with opening (8 mm Ø) to take gas sample
Interior Material 1.4301 (ASTM 304), corrosion resistant
Max. Number of Shelves 6
Max. Loading of Chamber 198 lb. (89.8 kg)
Max. Loading per Shelf 33 lb. (15 kg)
Housing rear Zinc-plated steel
Country of origin Germany
Internal Dimensions (W x H x D) 22 x 18.9 x 15.7 in. (55.9 x 48 x 39.9 cm)
External Dimensions (W x H x D) 28.3 x 33.5 x 23.3 in. (71.8 x 85.1 x 59.2 cm)
Weight 166 lb. (75.3 kg)
Electrical Requirements 115 V (±10%), 50/60 Hz approx. 1300 W / 11.4 A

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $7,091.00
Our Price: $7,091.00
Sale Price: $6,807.36
Money Saved: $283.64
Memmert ICO105 K7 CO2 Incubator w/ Active Humidity Control 107L, 115V Memmert ICO105 K7 CO2 Incubator w/ Active Humidity Control 107L, 115V

Temperature Range Ambient +5°C to 50°C
Temperature Uniformity ± 0.3°C at 37°C
Volume 107L (3.8 cu. ft.)
CO2 Range 0 to 20%
Sterilization Program 60 minutes at 180°C (without removing the sensors)
Temperature Setting Resolution 0.1°C
Temperature Stability ± 0.1°C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Active Humidity Control 40 to 97% RH, or no RH
CO2 Control Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
CO2 Setting Accuracy 0.1%
CO2 Stability ± 0.2%
Control Technology TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT The process time does not start until the set temperature is reached
Adjustable Parameters Temperature (Celsius or Fahrenheit), CO2, Timer
Communication Interfaces Ethernet LAN, USB
Documentation Program Stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
AutoSAFETY Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic System Integral fault diagnostics for temperature and CO2
Alarm Visual and acoustic
Heating Concept 6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
Door Fully insulated stainless steel door with 2-point locking (compression door lock)
Shelving 2 perforated stainless steel shelves
Inner Glass Door with opening (8 mm Ø) to take gas sample
Interior Material 1.4301 (ASTM 304), corrosion resistant
Max. Number of Shelves 6
Max. Loading of Chamber 198 lb. (89.8 kg)
Max. Loading per Shelf 33 lb. (15 kg)
Housing rear Zinc-plated steel
Country of origin Germany
Internal Dimensions (W x H x D) 22 x 18.9 x 15.7 in. (55.9 x 48 x 39.9 cm)
External Dimensions (W x H x D) 28.3 x 33.5 x 23.3 in. (71.8 x 85.1 x 59.2 cm)
Weight 166 lb. (75.3 kg)
Electrical Requirements 115 V (±10%), 50/60 Hz approx. 1300 W / 11.4 A

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $7,510.00
Our Price: $7,510.00
Sale Price: $7,209.60
Money Saved: $300.40
Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V

Volume 108 L (3.8 cu.ft.)
Setting Temperature Range 0 to +70°C
Working Temperature Range Without light: from 0°C (at least 20°C below ambient) to +70°C
Setting Accuracy 0.1°C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter
Autodiagnostic System For fault analysis
Control Panel ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Communication Interfaces Ethernet LAN
Convection Forced ventilation by Peltier fan
Heating Concept Peltier energy-saving heating/cooling system integrated in the rear (heat pump principle)
Humidity Max. 70%, non-condensing
Shelving 2 stainless steel wire shelves
Max. Number of Shelves 5
Max. Loading of Chamber 330 lbs (150 kg)
Max. Loading Per Shelf 44 lb. (20 kg)
Interior Dimensions (WxHxD) 22” x 18.9” x 15.8” (56 x 48 x 40 cm)
Exterior Dimensions (WxHxD) 29.3” x 34” x 23” (74.5 x 86.4 x 58.4 cm)
Weight 172 lbs (78 kg)
Electrical Load 115 V, 50/60 Hz, approx. 320 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $8,047.00
Our Price: $8,047.00
Sale Price: $7,725.12
Money Saved: $321.88
Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V

Volume 108 L (3.8 cu.ft.)
Setting Temperature Range 0 to +70°C
Working Temperature Range Without light: from 0°C (at least 20°C below ambient) to +70°C
Setting Accuracy 0.1°C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Temperature Control Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
Autodiagnostic System For fault analysis
Control Panel ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
AtmoCONTROL AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Communication Interfaces Ethernet LAN, USB
Convection Forced ventilation by Peltier fan
Heating Concept Peltier energy-saving heating/cooling system integrated in the rear (heat pump principle)
Humidity Max. 70%, non-condensing
Max. Loading Per Shelf 44 lb. (20 kg)
Interior Dimensions (WxHxD) 22 x 18.9 x 15.8 in. (56 x 48 x 40 cm)
Exterior Dimensions (WxHxD) 29.3 x 34 x 23 in. (74.5 x 86.4 x 58.4 cm)
Electrical Load 115 V, 50/60 Hz, approx. 320 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $8,582.00
Our Price: $8,582.00
Sale Price: $8,238.72
Money Saved: $343.28
Free Shipping
Boekel Scientific 301650 Large Platelet Incubator Boekel Scientific 301650 Large Platelet Incubator

Electrical

115V, 1 Phase, 50/60Hz

Temperature Range

20°C - 24°C

Alarms

Door, Printer, Inventory, Low Temperature, High Temperature, Agitator

Printer

50mm thermal printer

Temperature Control Method

Thermoelectric

Inventory Management System

Time Based

Operation Temperature Range

16°C - 28°C Ambient

Temperature Accuracy

±0.5°C between 20°C and 24°C

Temperature Setting

20°C - 24°C (22.0°C default temperature)

Connectivity

USB, Ethernet, RS485

Product Dimensions

25.3" W x 26.5" D x 30.0" H

Interior Dimensions

20.75" W x 17.25" D x 19.5" H

Interior Light

Yes, 6" LED strip

Shipping Weight

67 lbs

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $10,204.97
Our Price: $9,898.82
Sale Price: $8,478.11
Money Saved: $1,726.86
Memmert ICP110 Refrigerated Forced Circulation Incubator 108L, 115V Memmert ICP110 Refrigerated Forced Circulation Incubator 108L, 115V

Volume 108 L (3.8 cu. ft.)
Setting Temperature Range -12°C to +60 °C
Working Temperature Range -12°C to +60°C (Optimum performance at ambient temperature of +16°C to +34°C)
Setting Accuracy Temperature 0.1 °C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting German, English, Spanish, French, Polish, Czech, Hungarian
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, program time, time zones, summertime/wintertime
Programming AtmoCONTROL software on USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control Mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating approx. 10°C above nominal temperature
Temperature Control Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY Integrated over- and undertemperature protection "ASF", automatic tolerance, alarm on over- or undertemperature, switches off heating or compressor as necessary
Autodiagnostic System For fault analysis
Alarm Visual and acoustic
Air Jacket Air jacket heating system for gentle all-around heating
Cooling Energy-saving CFC-free cooling/heating system (refrigerant R134a)
Defrosting Highly efficient automatic defrosting system
Door Fully insulated stainless steel door with 2-point locking (compression door lock)
Inner Glass Door Equipped
Max. Number of Internals 5
Max. Loading of Chamber 150 kg
Max. Loading per Internal 20 kg
Housing Rear zinc-plated steel
Weight Approx. 122 lbs (55 kg)
Internal Dimensions (W x H x D) 22.0 x 18.9 x 15.7 inches (56 x 48 x 40 cm)
External Dimensions (W x H x D) 29.3 x 48.5 x 23.0 inches (74.5 x 123.3 x 58.4 cm)
Electrical Load 115 V, 50/60 Hz, approx. 1200 W

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $9,801.00
Our Price: $9,801.00
Sale Price: $9,408.96
Money Saved: $392.04