Larger than 181L | 6.5 cu ft

Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0.7kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	600 × 530 × 1000 mm
External dimensions WxDxH	710 × 656 × 1619 mm
Internal capacity	318L
Inner door	Reinforced glass door x 2
Shelf load capacity	~15 kg/pc.
Shelf rest step number	29 steps
Power supply (50/60 Hz)	AC115V 10A (with plug)
Weight	~102 kg

Manufacturer's List Price: $3,745.00

Our Price: $3,520.00

Money Saved: $225.00

Yamato IC-803CW General Purpose Incubator with Window 318L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0.7kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	600 × 530 × 1000 mm
External dimensions WxDxH	710 × 656 × 1619 mm
Internal capacity	318L
Inner door	Reinforced glass door x 2
Shelf load capacity	~15 kg/pc.
Shelf rest step number	29 steps
Power supply (50/60 Hz)	AC115V 10A (with plug)
Weight	~102 kg

Manufacturer's List Price: $3,915.00

Our Price: $3,680.00

Money Saved: $235.00

Memmert IN260 Natural Convection Incubator 256L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5 above ambient temperature to +80 °C
Volume	256 L (9 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door	Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	9
Max. Loading of Chamber	661 lbs
Max. Loading per Shelf	44 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	25.2 x 31.5 x 19.7 inches
Exterior Dimensions (WxHxD)	32.4 x 46.6 x 26.9 inches (d +2.2” door handle)
Net Weight	Approx. 243 lbs
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A

Manufacturer's List Price: $5,067.00

Our Price: $5,067.00

Sale Price: $4,864.32

Money Saved: $202.68

Memmert IF260 Forced Circulation Incubator 256L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	256 L (9 cu.ft.)
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation	Program stored in case of power failure
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	9
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	661 lbs
Interior Dimensions (WxHxD)	25.2” x 31.5” x 19.7” (64 x 80 x 50 cm)
Exterior Dimensions (WxHxD)	32.4” x 46.6” x 26.9” (82.4 x 118.3 x 68.4 cm)
Net Weight	Approx. 243 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $5,878.00

Our Price: $5,878.00

Sale Price: $5,642.88

Money Saved: $235.12

Memmert IN260plus Natural Convection Incubator 256L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	256 L (9 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	2 stainless steel grids, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	9
Max. Loading of Chamber	661 lbs (300 kg)
Max. Loading per Shelf	44 lbs (20 kg)
Housing	Rear zinc-plated steel
Interior Dimensions (WxHxD)	25.2 x 31.5 x 19.7 inches
Exterior Dimensions (WxHxD)	32.4 x 46.6 x 22 inches (d +2.2” door handle)
Net Weight	Approx. 243 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $6,059.00

Our Price: $6,059.00

Sale Price: $5,816.64

Money Saved: $242.36

Yamato IN-804-115V Refrigerated Incubator Programmable 286L, 115V

System	Forced air convection
Operating temperature range	-10°C~+50°C
Temperature adjustment accuracy	±0.3°C (refrigerator in continuous operation) / ±1.0°C (refrigerator in cycle operation)
Temp. distribution accuracy	±1.0°C (refrigerator in continuous operation at 37°C)
Max. temp. reaching time	20~50°C ~30min
Minimum temp. reaching time	20~-10°C ~65min
Interior material	Stainless steel
Exterior material	Chrome free electronic galvanized plated steel plate chemical proof baking finish
Observation window	---
Heat insulation material	Styrene foam
Refrigerator	Air-cooled fully closed compressor 300W
Refrigerator medium	R404A
Defrosting mechanism	Manual ON / Auto OFF, Timer operation, Cycle operation
Blower fan	Axial fan
Heater	Iron-chrome wire heater: 750W
Sensor	Platinum resistance temperature detector: Pt100Ω (temp. controller), K-thermocouple (overheat prevention device)
Cable port (right side)	I.D.: 30 mm
Temperature control	PID control
Temperature setting	Digital setting with ▲▼ keys
Temperature display	Measured temperature: 4-digit orange LED digital display + VFD fluorescent display
Timer / timer resolution	0 min. ~ 999 hrs. 59 min. / 1 min.
Operation function	Fixed temperature, auto stop, auto start, program (up to 32 steps, repeat operation)
Additional functions	Timer function (accumulated time to 49,999 hrs), calibration off-set function, clock display
Safety device	Self diagnostic function (Temp. sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention function), Key lock, Over current ELB, Overheat prevention device
Internal dimensions W x D x H	600 x 477 x 1000 mm
External dimensions W x D x H	710 x 645 x 1630 mm
Internal capacity	286L
Shelf plate load	15kg / pc.
Shelf rest step number / pitch	23 steps / 30mm
Power supply (50/60Hz)	AC115V 10.5A (with plug) AC220V 6A (no plug, round terminal)
Weight	~ 120kg
Included accessories	Shelf and brackets (stainless steel punched metal), 5 pcs. shelves / 10 pcs. brackets
Door keys	---

Manufacturer's List Price: $7,105.00

Our Price: $6,569.00

Money Saved: $536.00

Memmert IF260plus Forced Circulation Incubator 256L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	256 L (9 cu.ft.)
Temperature Sensor	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program	Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent	Vent connection with restrictor flap
Documentation	Program stored in case of power failure
Temperature Control	Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY	Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	9
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	661 lbs
Interior Dimensions (WxHxD)	25.2” x 31.5” x 19.7” (64 x 80 x 50 cm)
Exterior Dimensions (WxHxD)	32.4” x 46.6” x 26.9” (82.4 x 118.3 x 68.4 cm)
Net Weight	Approx. 243 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $6,854.00

Our Price: $6,854.00

Sale Price: $6,579.84

Money Saved: $274.16

Memmert IN450 Natural Convection Incubator 449L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5 above ambient temperature to +80 °C
Volume	449 L (15.9 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door	Inner glass doors; fully insulated stainless steel doors with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	8
Max. Loading of Chamber	661 lbs
Max. Loading per Shelf	66 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	40.9 x 28.3 x 23.6 inches
Exterior Dimensions (WxHxD)	48.2 x 48.3 x 30.9 inches (d +2.2” door handle)
Net Weight	Approx. 355 lbs. (161.025 kg)
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 1500 W / 13.1 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $7,498.00

Our Price: $7,498.00

Sale Price: $7,198.08

Money Saved: $299.92

Memmert IF450 Forced Circulation Incubator 449L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	449 L (15.9 cu.ft.)
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation	Program stored in case of power failure
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	8
Max. Loading Per Shelf	66 lbs
Max. Loading of Chamber	661 lbs
Interior Dimensions (WxHxD)	40.9” x 28.3” x 23.6” (104 x 72 x 60 cm)
Exterior Dimensions (WxHxD)	48.2” x 48.3” x 30.9 (122.4 x 124.7 x 78.4 cm)
Net Weight	Approx. 355 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1500 W

Manufacturer's List Price: $8,413.00

Our Price: $8,413.00

Sale Price: $8,076.48

Money Saved: $336.52

Corepoint Scientific CPBOD231WSW-0 BOD Refrigerated Incubator

Capacity	23 cu. ft. (651.3L)
Temperature Setpoint Range	-10°C to 50°C
Shelves	5 Adjustable Wire Shelves
Mobility and Leveling	4 swivel casters, front casters locking
Insulation	Cabinet is foamed-in-place with EPA compliant high density urethane foam
Exterior Material	White powder coated steel
Access Control	Keyed door lock
Humidity Stability	± 3% RH
Refrigerant	R600a
Controller Technology	Proportional Integral Derivative (PID)
External Dimensions (W x D x H)	26.87 x 36.25 x 80.5 in. (68.2498 x 92.075 x 204.5 cm)
Internal Dimensions (W x D x H)	22 x 26.5 x 59 in. (55.8 x 67.3 x 149.9 cm)
Weight	340 lb. (154.2 kg)
Electrical Requirements	115V, 60Hz, 12.4A

Manufacturer's List Price: $9,069.00

Our Price: $8,162.10

Money Saved: $906.90

Yamato IC-903CR General Purpose Incubator with Communication Port 567L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	2.2kW Iron-chrome wire heater
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	1070 x 530 x 1000 mm
External dimensions WxDxH	1180 x 656 x 1619 mm
Internal capacity	567L
Inner door	Reinforced glass door x 2
Shelf load capacity	~15 kg/pc.
Shelf rest step number	29 steps x 2
Power supply (50/60 Hz)	AC115V 13A (with plug) AC220V 6.5A (no plug, round terminal)
Weight	~166kg

Manufacturer's List Price: $8,755.00

Our Price: $8,229.70

Money Saved: $525.30

Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V

System	Forced air convection
Operating temperature range	-10°C to +50°C
Temperature adjustment accuracy	±0.3°C (refrigerator in continuous operation) / ±1.0°C (refrigerator in cycle operation)
Temp. distribution accuracy	±1.0°C (refrigerator in continuous operation at 37°C)
Max. temp. reaching time	Data unavailable
Minimum temp. reaching time	Data unavailable
Interior material	Stainless steel
Exterior material	Chrome free electronic galvanized plated steel plate chemical proof baking finish
Observation window	Data unavailbale
Heat insulation material	Styrene foam
Refrigerator	Air-cooled fully closed compressor 300W
Refrigerator medium	R404A
Defrosting mechanism	Manual ON / Auto OFF, Timer operation, Cycle operation
Blower fan	Axial fan
Heater	Iron-chrome wire heater: 750W
Sensor	Platinum resistance temperature detector: Pt100Ω (temp. controller), K-thermocouple (overheat prevention device)
Cable port (right side)	I.D.: 30 mm
Temperature control	PID control
Temperature setting	Digital setting with ▲▼ keys
Temperature display	Measured temperature: 4-digit orange LED digital display + VFD fluorescent display
Timer / timer resolution	0 min. ~ 999 hrs. 59 min. / 1 min.
Operation function	Fixed temperature, auto stop, auto start, program (up to 32 steps, repeat operation)
Additional functions	Timer function (accumulated time to 49,999 hrs), calibration off-set function, clock display
Safety device	Self diagnostic function (Temp. sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention function), Key lock, Over current ELB, Overheat prevention device
Internal dimensions W x D x H	600 x 477 x 1000 mm
External dimensions W x D x H	710 x 645 x 1630 mm
Internal capacity	286L
Shelf plate load	15kg / pc.
Shelf rest step number / pitch	23 steps / 30mm
Power supply (50/60Hz)	AC115V (with plug) AC220V (no plug, round terminal)
Weight	~ 120kg
Door keys	2 keys

Manufacturer's List Price: $8,915.00

Our Price: $8,380.10

Money Saved: $534.90

Memmert IN450plus Natural Convection Incubator 449L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	At least 5°C above ambient temperature to +80°C
Internal Volume	449 L (15.9 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel doors with 2-point locking (compression door lock), inner glass doors
Shelving	2 stainless steel grids, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	8
Max. Loading of Chamber	661 lbs (300 kg)
Max. Loading per Shelf	66 lbs (30 kg)
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	40.9 x 28.4 x 23.6 inches
Exterior Dimensions (WxHxD)	48.2 x 49.1 x 30.9 inches
Net Weight	Approx. 355 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1500 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $8,751.00

Our Price: $8,751.00

Sale Price: $8,400.96

Money Saved: $350.04

Yamato IC-903CW General Purpose Incubator with Window 567L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater - 2.2kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	1070 x 530 x 1000 mm
External dimensions WxDxH	1180 x 656 x 1619 mm
Internal capacity	567L
Inner door	Reinforced glass door x 2
Shelf load capacity	~15 kg/pc.
Shelf rest step number	29 steps x 2
Power supply (50/60 Hz)	AC115V 13A (with plug) AC220V 6.5A (no plug, round terminal)
Weight	~166kg

Manufacturer's List Price: $9,325.00

Our Price: $8,765.50

Money Saved: $559.50

Memmert IF450plus Forced Circulation Incubator 449L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	449 L (15.9 cu.ft.)
Temperature Sensor	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program	Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent	Vent connection with restrictor flap
Documentation	Program stored in case of power failure
Temperature Control	Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY	Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	8
Max. Loading Per Shelf	66 lbs
Max. Loading of Chamber	661 lbs
Interior Dimensions (WxHxD)	40.9” x 28.4” x 23.6” (104 x 72 x 60 cm)
Exterior Dimensions (WxHxD)	48.2” x 49.1” x 30.9 (122.4 x 124.7 x 78.4 cm)
Net Weight	Approx. 355 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1500 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $9,752.00

Our Price: $9,752.00

Sale Price: $9,361.92

Money Saved: $390.08

Memmert IN750 Natural Convection Incubator 749L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5 above ambient temperature to +80 °C
Volume	749 L (26.5 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door	Inner glass doors; fully insulated stainless steel doors with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	14
Max. Loading of Chamber	661 lbs
Max. Loading per Shelf	66 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	40.9 x 47.2 x 23.6 inches
Exterior Dimensions (WxHxD)	48.2 x 67.7 x 30.9 inches (d +2.2” door handle)
Net Weight	Approx. 661 lbs
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 1800 W / 15.7 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $9,951.00

Our Price: $9,951.00

Sale Price: $9,552.96

Money Saved: $398.04

Memmert IF750 Forced Circulation Incubator 749L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	749 L (26.5 cu.ft.)
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation	Program stored in case of power failure
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	14
Max. Loading Per Shelf	66 lbs
Max. Loading of Chamber	661 lbs
Interior Dimensions (WxHxD)	40.9” x 47.2” x 23.6” 104 x 120 x 60 cm)
Exterior Dimensions (WxHxD)	48.2” x 67.7” x 30.9” (122.4 x 172 x 78.4 cm)
Net Weight	Approx. 474 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1800 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $10,826.00

Our Price: $10,826.00

Sale Price: $10,392.96

Money Saved: $433.04

Memmert ICO240 CO2 Incubator 241L, 115V

Temperature Range	Ambient +5°C to 50°C
Temperature Uniformity	± 0.3°C at 37°C
Volume	241L (8.5 cu. ft.)
CO2 Range	0 to 20%
Sterilization Program	60 minutes at 180°C (without removing the sensors)
Temperature Setting Resolution	0.1°C
Temperature Stability	± 0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Humidity Control (Standard)	Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %
CO2 Control	Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
CO2 Setting Accuracy	0.1%
CO2 Stability	± 0.2%
Control Technology	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT	The process time does not start until the set temperature is reached
Adjustable Parameters	Temperature (Celsius or Fahrenheit), CO2, Timer
Communication Interfaces	Ethernet LAN, USB
Documentation Program	Stored in case of power failure
Programming	AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
AutoSAFETY	Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic System	Integral fault diagnostics for temperature and CO2
Alarm	Visual and acoustic
Heating Concept	6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Shelving	2 perforated stainless steel shelves
Inner Glass Door	with opening (8 mm Ø) to take gas sample
Interior Material	1.4301 (ASTM 304), corrosion resistant
Max. Number of Shelves	12
Max. Loading of Chamber	308 lb. (139.7 kg)
Max. Loading per Shelf	33 lb. (15 kg)
Housing rear	Zinc-plated steel
Country of origin	Germany
Internal Dimensions (W x H x D	23.6 x 31.9 x 19.7 in. (59.9 x 81 x 50 cm)
External Dimensions (W x H x D)	29.9 x 46.5 x 27.2 in. (75.9 x 118.1 x 69.1 cm)
Weight	243 lb. (110.2 kg)
Electrical Requirements	115 V (±10%), 50/60 Hz approx. 1650 W / 14.4 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $10,837.00

Our Price: $10,837.00

Sale Price: $10,403.52

Money Saved: $433.48

Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V

System	Natural convection
Operating temp. range	0~+60°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0.7kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	600 × 530 × 1000 mm
External dimensions WxDxH	710 × 656 × 1619 mm
Internal capacity	318L
Inner door	Reinforced glass door x 2
Shelf load capacity	~15 kg/pc.
Shelf rest step number	29 steps
Power supply (50/60 Hz)	AC115V 10A (with plug)
Weight	~102 kg

Manufacturer's List Price: $11,265.00

Our Price: $10,589.10

Money Saved: $675.90

Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V

Volume	256 L (9 cu.ft.)
Setting Temperature Range	0 to +70°C
Working Temperature Range	Without light: from 0°C (at least 20°C below ambient) to +70°C
Setting Accuracy	0.1°C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter
Autodiagnostic System	For fault analysis
Control Panel	ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Communication Interfaces	Ethernet LAN
Convection	Forced ventilation by Peltier fan
Heating Concept	Peltier energy-saving heating/cooling system integrated in the rear (heat pump principle)
Humidity	Max. 70%, non-condensing
Shelving	2 stainless steel wire shelves
Max. Number of Shelves	9
Max. Loading of Chamber	661 lbs (299.8 kg)
Max. Loading Per Shelf	44 lb. (20 kg)
Interior Dimensions (WxHxD)	25.2” x 31.5” x 19.7” (64 x 80 x 50 cm)
Exterior Dimensions (WxHxD)	32.4” x 46.6” x 25.8” (82.4 x 118.3 x 68.4 cm)
Weight	252 lbs (114.3 kg)
Electrical Load	115 V, 50/60 Hz, approx. 140 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $11,255.00

Our Price: $11,255.00

Sale Price: $10,804.80

Money Saved: $450.20

Memmert IN750plus Natural Convection Incubator 749L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	749 L (26.4 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel doors with 2-point locking (compression door lock), inner glass doors
Shelving	2 stainless steel grids, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	14
Max. Loading of Chamber	661 lbs (300 kg)
Max. Loading per Shelf	66 lbs (30 kg)
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	40.9 x 47.2 x 23.6 inches
Exterior Dimensions (WxHxD)	48.2 x 67.9 x 30.9 inches
Net Weight	Approx. 474 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1800 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $11,620.00

Our Price: $11,620.00

Sale Price: $11,155.20

Money Saved: $464.80

Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V

Volume	256 L (9 cu.ft.)
Setting Temperature Range	0 to +70°C
Working Temperature Range	Without light: from 0°C (at least 20°C below ambient) to +70°C
Setting Accuracy	0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Temperature Control	Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
Autodiagnostic System	For fault analysis
Control Panel	ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
AtmoCONTROL	AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Communication Interfaces	Ethernet LAN, USB
Convection	Forced ventilation by Peltier fan
Heating Concept	Peltier energy-saving heating/cooling system integrated in the rear (heat pump principle)
Humidity	Max. 70%, non-condensing
Shelving	2 stainless steel wire shelves
Max. Number of Shelves	9
Max. Loading of Chamber	661 lbs (299.8 kg)
Max. Loading Per Shelf	44 lb. (20 kg)
Interior Dimensions (WxHxD)	25.2 x 31.5 x 19.7 in. (64 x 80 x 50 cm)
Exterior Dimensions (WxHxD)	32.4 x 46.6 x 25.8 in. (82.4 x 118.3 x 68.4 cm)
Weight	252 lbs (114.3 kg)
Electrical Load	115 V, 50/60 Hz, approx. 600 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $12,015.00

Our Price: $12,015.00

Sale Price: $11,534.40

Money Saved: $480.60

Memmert ICO240 K7 CO2 Incubator w/ Active Humidity Control 241L, 115V

Temperature Range	Ambient +5°C to 50°C
Temperature Uniformity	± 0.3°C at 37°C
Volume	241L (8.5 cu. ft.)
CO2 Range	0 to 20%
Sterilization Program	60 minutes at 180°C (without removing the sensors)
Temperature Setting Resolution	0.1°C
Temperature Stability	± 0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Active Humidity Control	40 to 97% RH, or no RH
CO2 Control	Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
CO2 Setting Accuracy	0.1%
CO2 Stability	± 0.2%
Control Technology	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT	The process time does not start until the set temperature is reached
Adjustable Parameters	Temperature (Celsius or Fahrenheit), CO2, Timer
Communication Interfaces	Ethernet LAN, USB
Documentation Program	Stored in case of power failure
Programming	AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
AutoSAFETY	Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic System	Integral fault diagnostics for temperature and CO2
Alarm	Visual and acoustic
Heating Concept	6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Shelving	2 perforated stainless steel shelves
Inner Glass Door	with opening (8 mm Ø) to take gas sample
Interior Material	1.4301 (ASTM 304), corrosion resistant
Max. Number of Shelves	12
Max. Loading of Chamber	308 lb. (139.7 kg)
Max. Loading per Shelf	33 lb. (15 kg)
Housing rear	Zinc-plated steel
Country of origin	Germany
Internal Dimensions (W x H x D	23.6 x 31.9 x 19.7 in. (59.9 x 81 x 50 cm)
External Dimensions (W x H x D)	29.9 x 46.5 x 27.2 in. (75.9 x 118.1 x 69.1 cm)
Weight	243 lb. (110.2 kg)
Electrical Requirements	115 V (±10%), 50/60 Hz approx. 1650 W / 14.4 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $12,395.00

Our Price: $12,395.00

Sale Price: $11,899.20

Money Saved: $495.80

Memmert IF750plus Forced Circulation Incubator 749L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	749 L (26.5 cu.ft.)
Temperature Sensor	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program	Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent	Vent connection with restrictor flap
Documentation	Program stored in case of power failure
Temperature Control	Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY	Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	14
Max. Loading Per Shelf	66 lbs
Max. Loading of Chamber	661 lbs
Interior Dimensions (WxHxD)	40.9” x 47.2” x 23.6” (104 x 120 x 60 cm)
Exterior Dimensions (WxHxD)	48.2” x 67.7” x 30.9” (122.4 x 172 x 78.4 cm)
Net Weight	Approx. 474 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1800 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $12,533.00

Our Price: $12,533.00

Sale Price: $12,031.68

Money Saved: $501.32

Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V

Volume	256 L (9 cu. ft.)
Setting Temperature Range	-12°C to +60 °C
Working Temperature Range	-12°C to +60°C (Optimum performance at ambient temperature of +16°C to +34°C)
Setting Accuracy Temperature	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
ControlCOCKPIT	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, program time, time zones, summertime/wintertime
Programming	AtmoCONTROL software on USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control	Mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating approx. 10°C above nominal temperature
Temperature Control	Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY	Integrated over- and undertemperature protection "ASF", automatic tolerance, alarm on over- or undertemperature, switches off heating or compressor as necessary
Autodiagnostic System	For fault analysis
Alarm	Visual and acoustic
Air Jacket	Air jacket heating system for gentle all-around heating
Cooling	Energy-saving CFC-free cooling/heating system (refrigerant R134a)
Defrosting	Highly efficient automatic defrosting system
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Inner Glass Door	Equipped
Max. Number of Internals	9
Max. Loading of Chamber	200 kg
Max. Loading per Internal	20 kg
Housing	Rear zinc-plated steel
Weight	Approx. 122 lbs (55 kg)
Internal Dimensions (W x H x D)	25.2 x 31.5 x 19.7 inches (64 x 80 x 50 cm)
External Dimensions (W x H x D)	32.4 x 61.1 x 26.9 inches (82.4 x 155.2 x 68.4 cm)
Electrical Load	115 V, 50/60 Hz, approx. 1200 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $13,300.00

Our Price: $13,300.00

Sale Price: $12,768.00

Money Saved: $532.00

Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V

Volume	384 L (13.6 cu. ft.)
Setting Temperature Range	0 to +70°C
Working Temperature Range	Without light: from 0°C (at least 20°C below ambient) to +70°C
Setting Accuracy	0.1°C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter
Autodiagnostic System	For fault analysis
Control Panel	ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Communication Interfaces	Ethernet LAN
Convection	Forced ventilation by Peltier fan
Heating Concept	Peltier energy-saving heating/cooling system integrated in the rear (heat pump principle)
Humidity	Max. 70%, non-condensing
Shelving	2 stainless steel wire shelves
Max. Number of Shelves	14
Max. Loading of Chamber	440 lbs (200 kg)
Max. Loading Per Shelf	44 lb. (20 kg)
Interior Dimensions (WxHxD)	25.2 x 47.2 x 19.7 in. (64 x 120 x 50 cm)
Exterior Dimensions (WxHxD)	32.4 x 67.7 x 25.8 in. (82.4 x 172 x 65.5 cm)
Weight	347 lbs (157.4 kg)
Electrical Load	115 V, 50/60 Hz, approx. 600 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $13,945.00

Our Price: $13,945.00

Sale Price: $13,387.20

Money Saved: $557.80

Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V

Volume	449 L (15.8 cu. ft.)
Setting Temperature Range	-12 to +60 °C
Working Temperature Range	-12°C to +60°C (Optimum performance at ambient temperature of +16°C to +34°C)
Setting Accuracy Temperature	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
ControlCOCKPIT	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, program time, time zones, summertime/wintertime
Programming	AtmoCONTROL software on USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control	Mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating approx. 10°C above nominal temperature
Temperature Control	Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY	Integrated over- and undertemperature protection "ASF", automatic tolerance, alarm on over- or undertemperature, switches off heating or compressor as necessary
Autodiagnostic System	For fault analysis
Alarm	Visual and acoustic
Air Jacket	Air jacket heating system for gentle all-around heating
Cooling	Energy-saving CFC-free cooling/heating system (refrigerant R134a)
Defrosting	Highly efficient automatic defrosting system
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Inner Glass Door	Equipped
Max. Number of Internals	8
Max. Loading of Chamber	200 kg
Max. Loading per Internal	30 kg
Housing	Rear zinc-plated steel
Weight	Approx. 122 lbs (55 kg)
Internal Dimensions (W x H x D)	40.9 x 28.3 x 23.6 inches (104 x 72 x 60 cm)
External Dimensions (W x H x D)	48.2 x 57.8 x 30.9 inches (122.4 x 146.7 x 78.4 cm)
Electrical Load	115 V, 50/60 Hz, approx. 1200 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $16,930.00

Our Price: $16,930.00

Sale Price: $16,252.80

Money Saved: $677.20

Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V

Setting Temperature Range	0°C to 70°C
Working Temperature Range	0°C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light]
Volume	749L (26.5 cu. ft.)
Temperature Setting Resolution	0.1°C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Convection	Forced ventilation by Peltier fan
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Control Technology	SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT	The process time does not start until the set temperature is reached
Adjustable Parameters	Temperature (Celsius or Fahrenheit), timer
Communication Interfaces	Ethernet LAN
Documentation Program	Stored in case of power failure
Programming	AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Temperature Control	Adjustable electronic overtemperature monitor
Autodiagnostic System	Integral fault diagnostics for temperature and humidity
Heating Concept	Energy-saving Peltier heating/cooling system integrated in the rear (heat pump principle)
Door	Fully insulated stainless steel door with 2-point locking (compression door lock) w/ inner glass door
Shelving	2 stainless steel wire shelves
Max. Number of Shelves	14
Max. Loading of Chamber	440 lb. (199.6 kg)
Max. Loading per Shelf	66 lb. (29.9 kg)
Country of Origin	Germany
Internal Dimensions (W x H x D)	40.9 x 47.2 x 23.6 in. (103.9 x 119.9 x 59.9 cm)
External Dimensions (W x H x D)	48.2 x 67.7 x 29.7 in. (122.4 x 172 x 75.4 cm)
Weight	507 lb. (230 kg)
Electrical Requirements	115V (±10%), 50/60Hz, approx. 1200W / 10.5 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $18,546.00

Our Price: $18,546.00

Sale Price: $17,804.16

Money Saved: $741.84

Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V

Setting Temperature Range	0°C to 70°C
Working Temperature Range	0°C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light]
Volume	749L (26.5 cu. ft.)
Temperature Setting Resolution	0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Convection	Forced ventilation by Peltier fan
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Control Technology	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
FunctionHeatBALANCE	Adapting the distribution of the heating performance of the upper and lower heating circuit from -50% to +50%
Function SetpointWAIT	The process time does not start until the set temperature is reached
Adjustable Parameters	Temperature (Celsius or Fahrenheit), timer
Communication Interfaces	Ethernet LAN, USB
Documentation Program	Stored in case of power failure
Programming	AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
Temperature Control	Adjustable electronic overtemperature monitor
AutoSAFETY	Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic System	Integral fault diagnostics for temperature and humidity
Alarms	Visual and acousitc
Heating Concept	Energy-saving Peltier heating/cooling system integrated in the rear (heat pump principle)
Door	Fully insulated stainless steel door with 2-point locking (compression door lock) w/ inner glass door
Shelving	2 stainless steel wire shelves
Max. Number of Shelves	14
Max. Loading of Chamber	440 lb. (199.6 kg)
Max. Loading per Shelf	66 lb. (29.9 kg)
Country of Origin	Germany
Internal Dimensions (W x H x D)	40.9 x 47.2 x 23.6 in. (103.9 x 119.9 x 59.9 cm)
External Dimensions (W x H x D)	48.2 x 67.7 x 29.7 in. (122.4 x 172 x 75.4 cm)
Weight	507 lb. (230 kg)
Electrical Requirements	115V (±10%), 50/60Hz, approx. 1200W / 10.5 A

Manufacturer's List Price: $18,830.00

Our Price: $18,830.00

Sale Price: $18,076.80

Money Saved: $753.20

Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V

Volume	749 L (26.4 cu. ft.)
Setting Temperature Range	-12°C to +60°C
Working Temperature Range	-12°C to +60°C (Optimum performance at ambient temperature of +16°C to +34°C)
Setting Accuracy Temperature	0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
ControlCOCKPIT	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, program time, time zones, summertime/wintertime
Programming	AtmoCONTROL software on USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control	Mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating approx. 10°C above nominal temperature
Temperature Control	Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY	Integrated over- and undertemperature protection "ASF", automatic tolerance, alarm on over- or undertemperature, switches off heating or compressor as necessary
Autodiagnostic System	For fault analysis
Alarm	Visual and acoustic
Air Jacket	Air jacket heating system for gentle all-around heating
Cooling	Energy-saving CFC-free cooling/heating system (refrigerant R134a)
Defrosting	Highly efficient automatic defrosting system
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Inner Glass Door	Equipped
Max. Number of Internals	14
Max. Loading of Chamber	200 kg
Max. Loading per Internal	30 kg
Housing	Rear zinc-plated steel
Internal Dimensions (W x H x D)	40.9 x 47.2 x 23.6 inches (104 x 120 x 60 cm)
External Dimensions (W x H x D)	48.2 x 57.8 x 30.9 inches (122.4 x 146.7 x 78.4 cm)
Electrical Load	115 V, 50/60 Hz, approx. 1200 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $19,958.00

Our Price: $19,958.00

Sale Price: $19,159.68

Money Saved: $798.32

Company

My Account

Quick Links