Home > Autoclave - Sterilizer Chamber Volume > Over 100 Liters
Sort By:
Page of 1
Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V

Circulation method Natural convection
Temp. setting range Room temp. +5~260°C
Temp. control accuracy ±1°C (at 260°C)
Temp. fluctuation ±1.5°C (at 260°C)
Temp. distribution accuracy ±5°C (at 260°C)
Temp. rising time ~60min.
Interior / Exterior material Stainless Steel / Chrome free electrogalvanized carbon steel sheet coated with chemical-proof baked-on finish
Insulation Material Glass wool
Heater
SUS 1.36kW
Sensor K type Thermocouple
Fan type / Fan motor −
Cable port I.D. 33mm (right side)
Exhaust port I.D. 33mm x 2 (on top)
Temperature control PID control by microprocessor
Temperature display Temp. display: Green 4-digit LED Digital Display (increment: 1°C)
Setting temp. display: Orange 5-digit LED Digital Display (increment: 1°C)
Timer 0 min~99 hrs 59 min (increment: 1 min. or 1 hr.)
Heater control Triac with Zero-cross control
Operation function Fixed temperature, Auto start, Auto stop, Quick auto stop, Program (99 steps, 99 patterns, repeat operation function)
Additional function Power on and operation time accumulation function (up to 65535 hours), Calendar time (24 hours), Calibration offset, Accumulated power consumption monitoring, Total CO₂ emission and heater output, Power recovery mode, Save and access operator setting information, key lock
Safety device Self-diagnostic functions (Sensor failure, SSR short circuit, Heater failure, Main relay contact failure, Automatic overheat prevention), earth leakage breaker, Independent overheat prevention device
Internal dimensions WxDxH 600 x 540 x 500 mm
External dimensions WxDxH 710 x 650 x 870 mm
Internal capacity 162L
Shelf plate with standard load ~15kg/pc
Shelf rest step number / pitch 13 steps / 30mm
Power source 115V 12.5A (with plug)
Weight ~62kg
Included accessories Shelf and brackets (stainless steel punched metal)( 2pcs./4pcs.)

Manufacturer's List Price: $3,620.00
Our Price: $3,403.00
Money Saved: $217.00
Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V

Circulation method Forced convection
Temp. setting range Room temp. +10~210°C
Temp. control accuracy ±1°C (at 210°C)
Temp. fluctuation ±1°C (at 210°C)
Temp. distribution accuracy ±3.5°C (at 210°C)
Temp. rising time ~60min.
Interior / Exterior material Stainless Steel / Chrome free electrogalvanized carbon steel sheet coated with chemical-proof baked-on finish
Insulation Material Glass wool
Heater SUS 2.4kW
Sensor K type Thermocouple
Fan type / Fan motor Sirocco Fan / Condenser type motor 30W
Cable port I.D. 33mm (right side)
Exhaust port I.D. 33mm x 2 (back)
Temperature control PID control by microprocessor
Temperature display Temp. display: Green 4-digit LED Digital Display (increment: 1°C)
Setting temp. display: Orange 5-digit LED Digital Display (increment: 1°C)
Timer 0 min~99 hrs 59 min (increment: 1 min. or 1 hr.)
Heater control Triac with Zero-cross control
Operation function Fixed temperature, Auto start, Auto stop, Quick auto stop, Program (99 steps, 99 patterns, repeat operation function)
Additional function Power on and operation time accumulation function (up to 65535 hours), Calendar time (24 hours), Calibration offset, Accumulated power consumption monitoring, Total CO₂ emission and heater output, Power recovery mode, Save and access operator setting information, key lock
Safety device Self-diagnostic functions (Sensor failure, SSR short circuit, Heater failure, Main relay contact failure, Automatic overheat prevention), earth leakage breaker, Independent overheat prevention device
Internal dimensions WxDxH 600 x 500 x 1000 mm
External dimensions WxDxH 710 x 650 x 1640 mm
Internal capacity 300L
Shelf plate with standard load ~15kg/pc
Shelf rest step number / pitch 29 steps / 30mm
Power source 115V 21.5A (no plug, round terminal)
220V 11.5A (no plug, round terminal)
Weight ~108kg
Included accessories Shelf and brackets (stainless steel punched metal)(4 pcs. / 8 pcs.)

Manufacturer's List Price: $8,220.00
Our Price: $7,727.00
Money Saved: $493.00
Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V Hirayama HICLAVE HVA-110 Economical Floor-Standing Autoclave with Cooling Fan, 110L, 208/220/240V

Temperature Operating Range
105ºC to 135ºC
Temperature Display Range
137ºC
Agar Warming Range
After sterilization, agar can be maintained from 45ºC to 60ºC
(programmable) to prevent coagulation for up to 20 hours.
Maximum Allowable Pressure
38 psi (0.26MPa)
Pressure Operating Range (gauge)
3 to 30 psi (0.021 to 0.206MPa)
Sterilization Timer
1 to 250 minutes
Overall Dimensions (W x D x H)
26.0" x 25.6" x 46.4" in
(66 cm x 65 cm x 118cm)
Chamber Dimensions
(Diameter x Height)
110 liters
16.5" x 31.3" (42.0 cm x 79.5 cm)
Safety Devices
Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker
Programs for Agar
Heating -> Sterilization -> Auto steam exhaust or ambient cooling (programmable) -> Warming -> Completion
Programs for Liquids
Heating -> Sterilization -> Auto steam exhaust or ambient cooling (programmable) -> Completion
Programs for Solids
Heating -> Sterilization -> Auto exhaust (fast) -> Completion
Power Source
208V / 220V / 240V, 50 / 60 Hz, single phase
Power Consumption
4000 watts (4000VA)
Shipping Weight
308 lb (140 kg)

Manufacturer's List Price: $19,200.00
Our Price: $18,097.50
Sale Price: $16,995.00
Money Saved: $2,205.00
Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V

Temperature Operating Range
105ºC to 135ºC
Temperature Display Range
10ºC to 137ºC
Temperature Warming Range
45ºC to 60ºC
Temperature Agar Dissolution
Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC
(programmable for up to 20 hours to prevent coagulations)
Gauge Pressure Operating Range
3 to 30 psi (0.021 to 0.206MPa)
Gauge Pressure Maximum Allowable
38 psi ( 0.26MPa)
Sterilization Timer
1 to 250 minutes
Delayed Auto-start Timer
Program autoclave to start 1 minute to 7 days later
Dimensions Overall (W x D x H)
26.0" x 25.6" x 46.5"
(66 cm x 65 cm x 118 cm)
Dimensions Chamber
(Diameter x Height)
110 liters
16.5" x 31.3" (42.0 cm x 79.5 cm)
Safety Devices
Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker
Programs for agar
Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion
Programs for liquids
Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion
Programs for solids
Heating -> Sterilization -> Exhaust (fast, default) -> Completion
Programs for melting agar or for faster start-up
Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion
Power Source
208V/220V/240V, 50/60 Hz, single phase
Power Consumption
4000 watts (4000VA)
SHIPPING WEIGHT
308 lb (140 kg)

Manufacturer's List Price: $20,500.00
Our Price: $19,247.50
Sale Price: $17,995.00
Money Saved: $2,505.00
Tuttnauer 5075ELP Lab Line Benchtop Autoclave Tuttnauer 5075ELP Lab Line Benchtop Autoclave

Chamber Volume 160L
Sterilization Temperature Range 105°C to 138°C
Maximum Available Height 17 in. (43.18 cm)
Chamber Dimensions (Diameter x H) 19.7 x 29.5 in. (50.03 x 74.93 cm)
Overall Dimensions (W x H x D) 33.9 x 29.1 x 44 in. (86.1 x 73.91 x 111.76 cm)
Plug Type NEMA L15-30
Electrical Requirements 230V, 60Hz, 3 Phase

Manufacturer's List Price: $37,685.24
Our Price: $32,523.18
Money Saved: $5,162.06
Tuttnauer 5075ELVC LabLine Floor Standing Autoclave Tuttnauer 5075ELVC LabLine Floor Standing Autoclave

Model 5075ELVC
P/N 023210990
Chamber Volume 160 L
Chamber Dimensions (Dia. x Depth) 50 x 75 cm
Overall Dimensions (D x H) 43 X 34 X 28 in (110 X 86.6 x 71.5 cm.)
Max Temperature 135C
Chamber Material Stainless Steel 316 (1.4571)
Housing/Door Material Stainless Steel 304 L
Internal Thermometer included
Sample Temperature Probes set of 2, included
Water-sensing Electrode included
External Pressure Gauge included
Printer included
USB included
Wire Baskets set of 2 (large)
Wheels w/ lock n/a
Customer must supply These units do not come with a plug. Nema (L15-30P & R or L14-30R & P) will need to be installed.
Voltage requirements 230V/ 50-60 Hz. 3-phase
Amps 30A
Power requirements 9.0KW
Compressed Air 1/2" 3-4 Bar (44-58 psi)
Tap Water 1/2" 3-4 Bar (29-44 psi)
Mineral Free Water 1/2" 2-3 Bar (29-44 psi) RO or Distilled
Drain 2" Min Withstanding temp of 8oC (176F)

Manufacturer's List Price: $42,374.35
Our Price: $39,892.54
Money Saved: $2,481.81