Forced Air Circulation

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V

Circulation method	Forced air circulation
Operating temp. range	Room temp. +10°C~260°C
Temp. adjustment accuracy	±1°C (at 210°C)
Temp. distribution accuracy	±2.5°C (at 210°C)
Max. temp. reaching time	~90 min.
Interior/Exterior material	Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	SUS pipe heater/0.8kW
Fan Type / Fan Motor	Scirocco fan, Condenser type motor 10W
Cable hole	30mm I.D. (on the right side) 1pc.
Exhaust port	30mm I.D. x 2 (on top)
Observation window	180×180mm Chemical strengthening glassx3
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. display	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions W×D×H	300×300×300 mm
External dimensions W×D×H	410×451×670 mm
Internal capacity	27L
Shelf plate with standard load	~15kg/piece
Shelf rest step number / Shelf rest pitch	9 steps / 30mm
Power source 50/60Hz	115V 7.5A (with plug)
Weight	~35kg

Manufacturer's List Price: $2,715.00

Our Price: $2,532.00

Money Saved: $183.00

Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V

Circulation method	Forced air circulation
Operating temp. range	Room temp. +10°C~260°C
Temp. adjustment accuracy	±1°C (at 210°C)
Temp. distribution accuracy	±2.5°C (at 210°C)
Max. temp. reaching time	~90 min.
Interior/Exterior material	Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	SUS pipe heater/1.2kW
Fan Type / Fan Motor	Scirocco fan, Condenser type motor 10W
Cable hole	30mm I.D. (on the right side) 1pc.
Exhaust port	30mm I.D. x 2 (on top)
Observation window	250 x 280mm Chemical strengthening glassx3
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. display	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions W×D×H	450×450×450 mm
External dimensions W×D×H	560×601×820 mm
Internal capacity	90L
Shelf plate with standard load	~15kg/piece
Shelf rest step number / Shelf rest pitch	11 steps / 30mm
Power source 50/60Hz	115V 11A (with plug)
Weight	~50KG

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,850.00

Our Price: $2,639.00

Money Saved: $211.00

Boekel Scientific 136400 Shake 'N' Bake - Rocking Hybridization Oven, 115V

Temperature Range:	Ambient +5°C to 70°C
Stability:	Chamber: ± 0.1ºC at 65ºC
Rocking Speed:	8 to 25 strokes/min
Max Shelf Load:	1kg (2.2lbs)
Tilt Angle:	5.5º to 11º
Product Dimensions:	Exterior: 32cm (121⁄2") 37cm (141⁄2") 41cm (16") Interior: 29cm (111⁄2") 29cm (111⁄2") 27cm (101⁄2") Tray: 22cm (81⁄2") 20cm (8") 1.3cm (1⁄2")
Shipping Weight:	12.6kg (28lbs.)
Electrical:	136400 - 115 VAC (60Hz)
*230V units are supplied with continental European plug.

Manufacturer's List Price: $3,307.44

Our Price: $2,740.56

Money Saved: $566.88

Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V

Circulation method	Forced air circulation
Operating temp. range	Room temp. +10°C~260°C
Temp. adjustment accuracy	±1°C (at 210°C)
Temp. distribution accuracy	±2.5°C (at 210°C)
Max. temp. reaching time	~90 min.
Interior/Exterior material	Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	SUS pipe heater/1.5kW
Fan Type / Fan Motor	Scirocco fan, Condenser type motor 10W
Cable hole	30mm I.D. (on the right side) 1pc.
Exhaust port	30mm I.D. x 2 (on top)
Observation window	250 x 280mm Chemical strengthening glassx3
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. display	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions W×D×H	600×500×500 mm
External dimensions W×D×H	710×651×870 mm
Internal capacity	150L
Shelf plate with standard load	~15kg/piece
Shelf rest step number / Shelf rest pitch	13 steps / 30mm
Power source 50/60Hz	115V 12.5A (with plug)
Weight	~65kg

Manufacturer's List Price: $3,390.00

Our Price: $2,947.00

Money Saved: $443.00

IKA Oven 125 Basic Drying Oven

Heat output	1500 W
Working temperature	room temp. +5 - 250 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	7 segment LED
Time setting range	1 - 144000 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	74 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1550 W
Power input standby	1 W

Manufacturer's List Price: $3,577.00

Our Price: $3,398.15

Money Saved: $178.85

IKA Oven 125 Basic Drying Oven w/ Glass Door

Heat output	1500 W
Working temperature	room temp. +5 - 250 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	7 segment LED
Time setting range	1 - 144000 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	81 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1550 W
Power input standby	2 W

Manufacturer's List Price: $4,013.00

Our Price: $3,812.35

Money Saved: $200.65

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V

Circulation method	Forced air circulation
External temp. range	5~35°C
Operating temp. range	RT+20°C to 210°C
Temp. control accuracy*¹	±0.5°C (at 210°C)
Temp. distribution accuracy*¹	±2.0°C (at 210°C)
Temp. gradient*¹	6°C (at 210°C)
Temp. rise time*¹	~60 min.
Chamber / Exterior / Insulation	Stainless steel / Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater / insulating material	1.1 kW Stainless pipe heater / Glass wool
Fan Type	Scirocco fan, Capacitor motor
Fan Motor	10W
Cable hole (right side)	33mm I.D. 1pc.
Exhaust port	33mm I.D. 2pcs. (top)
Observation window	Optional
Temp. controller	PID Z control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. / Info display	Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution)
Timer	1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation
Operation function	Fixed temperature, Program operation (max.99 steps, up to 99 patterns repeat operationing function), Duration/time select timer operation function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start)
Additional functions	Power on and Integration time function (up to 65,535 hours), Calibration offset, Time display, Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information
Heater circuit control	Triac zero-cross control
Sensor	K-thermocouple double sensor (for temperature control and independent overheat prevention device)
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Independent overheat prevention	Set temperature range: 0~250°C
Internal dimensions*² W×D×H	450×450×450 mm
External dimensions*² W×D×H	580×646×860 mm
Internal capacity	90L
Shelf plate with standard load	~15kg/pcs.
Shelf rest step number / Shelf rest pitch	11 steps / 30mm
Power source 50/60Hz	AC115V 10A (with plug)
Weight	~63kg

Manufacturer's List Price: $5,030.00

Our Price: $4,448.00

Money Saved: $582.00

Yamato DNF-301-115V Programmable Energy Saving Forced / Natural Convection Oven 27L, 115V

Circulation method	Forced convection + Natural convection
External temp. range	5~35°C
Temperature set range	0~130°C (Wind velocity: 0), 0~270°C (Wind velocity: 1~10)
Temperature control range	RT +25~120°C (Wind velocity: 0), RT +15~260°C (Wind velocity: 1~10)
Temp. control accuracy *¹	Forced convection: ±0.3°C (at 260°C) Natural convection: ±0.5°C (at 120°C)
Temp. fluctuation *¹	Forced convection: ±0.5°C (at 260°C) Natural convection: ±1.0°C (at 120°C)
Temp. distribution precision *¹	Forced convection: ±2.5°C (at 260°C) Natural convection: ±5°C (at 120°C)
Temp. gradient *¹	Forced convection: 5°C (at 260°C) Natural convection: 15°C (at 120°C)
Temp. rise time *¹	Forced convection: ~70min. Natural convection:~20min.
Chamber / Exterior / Insulation	Stainless steel / Cold rolled steel paneling, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater (stainless steel tube)	0.8kW
Wind velocity adjusting system	10 steps (600~1500rpm) + Wind velocity (0)
Damper	Circulation-Ventilation Manual switching: Interlocked intake and exhaust system (Complete exhaust applicable / Unable to reach 260°C with damper fully open)
Cable port	Inner diameter: 33mm×1 (right side)
Exhaust port	Outer diameter: 50mm×1 (back side)
Inlet port	Inner diameter: 33mm×1 (right side)
Controller	Model V type
Temperature control / setting system	PID Z control / Digital setting with ▲/▼ keys
Temperature display system	Temperature reading display: green 4-digit digital LED/Temperature setting display: orange 5-digit digital LED
Other indications	LED indicates temperature patterns for heating/stabilizing/cooling
Operating function	Fixed temperature operation, Program operation (maximum 99 steps or 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start)
Additional functions	Variable Air Flow Function, Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO 2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery
Temperature sensor	K type Thermocouple double sensor (for temperature control and independent overheat prevention device)
Heater control	Triac with Zero-cross Control
Control board	Self-diagnostic Functions (Detection for Temp. Sensor Failure, TRIAC Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Door switch	Door open: fan motor and heater circuit OFF, Door close: fan motor and heater circuit ON
Internal dimensions (W×D×H mm)*²	300×300×300
External dimensions (W×D×H mm)*²	430×495×740
Capacity	27L
Weight	~50kg
Number of shelf bracket step / pitch	6steps/30mm
Withstand load of shelf	15kg/shelf
Power supply V±10% 50/60Hz Single phase	AC115V, 7.5A (with plug) with external transformer

Manufacturer's List Price: $5,315.00

Our Price: $4,996.00

Money Saved: $319.00

Yamato DNF-401 Programmable Energy Saving Forced / Natural Convection Oven 90L, 115V

Circulation method	Forced convection + Natural convection
External temp. range	5~35°C
Temperature set range	0~130°C (Wind velocity: 0), 0~270°C (Wind velocity: 1~10)
Temperature control range	RT +25~120°C (Wind velocity: 0), RT +15~260°C (Wind velocity: 1~10)
Temp. control accuracy *¹	Forced convection: ±0.3°C (at 260°C) Natural convection: ±0.3°C (at 120°C)
Temp. fluctuation *¹	Forced convection: ±0.5°C (at 260°C) Natural convection: ±0.8°C (at 120°C)
Temp. distribution precision *¹	Forced convection: ±2.5°C (at 260°C) Natural convection: ±3°C (at 120°C)
Temp. gradient *¹	Forced convection: 7°C (at 260°C) Natural convection: 13°C (at 120°C)
Temp. rise time *¹	Forced convection: ~105min. Natural convection:~25min.
Chamber / Exterior / Insulation	Stainless steel / Cold rolled steel paneling, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater (stainless steel tube)	0.6kWx2
Wind velocity adjusting system	10 steps (600~1500rpm) + Wind velocity (0)
Damper	Circulation-Ventilation Manual switching: Interlocked intake and exhaust system (Complete exhaust applicable / Unable to reach 260°C with damper fully open)
Cable port	Inner diameter: 33mm×1 (right side)
Exhaust port	Outer diameter: 50mm×1 (back side)
Inlet port	Inner diameter: 33mm×1 (right side)
Controller	Model V type
Temperature control / setting system	PID Z control / Digital setting with ▲/▼ keys
Temperature display system	Temperature reading display: green 4-digit digital LED/Temperature setting display: orange 5-digit digital LED
Other indications	LED indicates temperature patterns for heating/stabilizing/cooling
Operating function	Fixed temperature operation, Program operation (maximum 99 steps or 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start)
Additional functions	Variable Air Flow Function, Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO 2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery
Temperature sensor	K type Thermocouple double sensor (for temperature control and independent overheat prevention device)
Heater control	Triac with Zero-cross Control
Control board	Self-diagnostic Functions (Detection for Temp. Sensor Failure, TRIAC Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Door switch	Door open: fan motor and heater circuit OFF, Door close: fan motor and heater circuit ON
Internal dimensions (W×D×H mm)*²	450×450×450
External dimensions (W×D×H mm)*²	580×645×890
Capacity	90L
Weight	~75kg
Number of shelf bracket step / pitch	11 steps/30mm
Withstand load of shelf	15kg/shelf
Power supply V±10% 50/60Hz Single phase	AC115V 11A (with plug)

Manufacturer's List Price: $6,100.00

Our Price: $5,174.00

Money Saved: $926.00

IKA Oven 125 Control Drying Oven

Heat output	1500 W
Working temperature	room temp. +5 - 300 °C
Adjustable safety circuit	50 - 320 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	LCD
Time setting range	1 - 142560 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	82 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
RS 232 interface	yes
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1600 W
Power input standby	2 W

Manufacturer's List Price: $5,528.00

Our Price: $5,221.60

Money Saved: $306.40

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V

Circulation method	Forced air circulation
External temp. range	5~35°C
Operating temp. range	RT+20°C to 210°C
Temp. control accuracy*¹	±0.5°C (at 210°C)
Temp. distribution accuracy*¹	±2.0°C (at 210°C)
Temp. gradient*¹	8°C (at 210°C)
Temp. rise time*¹	~70 min.
Chamber / Exterior / Insulation	Stainless steel / Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater / insulating material	1.2 kW Stainless pipe heater / Glass wool
Fan Type	Scirocco fan, Capacitor motor
Fan Motor	10W
Cable hole (right side)	33mm I.D. 1pc.
Exhaust port	33mm I.D. 2pcs. (top)
Observation window	Optional
Temp. controller	PID Z control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. / Info display	Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution)
Timer	1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation
Operation function	Fixed temperature, Program operation (max.99 steps, up to 99 patterns repeat operationing function), Duration/time select timer operation function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start)
Additional functions	Power on and Integration time function (up to 65,535 hours), Calibration offset, Time display, Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information
Heater circuit control	Triac zero-cross control
Sensor	K-thermocouple double sensor (for temperature control and independent overheat prevention device)
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Independent overheat prevention	Set temperature range: 0~250°C
Internal dimensions*² W×D×H	600×500×500 mm
External dimensions*² W×D×H	730×696×910 mm
Internal capacity	150L
Shelf plate with standard load	~15kg/pcs.
Shelf rest step number / Shelf rest pitch	13 steps / 30mm
Power source 50/60Hz	AC115V 11A (with plug)
Weight	~77kg

Manufacturer's List Price: $5,640.00

Our Price: $5,302.00

Money Saved: $338.00

IKA Oven 125 Control Drying Oven w/ Glass Door

Heat output	1500 W
Working temperature	room temp. +5 - 300 °C
Adjustable safety circuit	50 - 270 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	LCD
Time setting range	1 - 142560 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	89 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
RS 232 interface	yes
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1600 W
Power input standby	2 W

Manufacturer's List Price: $6,156.00

Our Price: $5,698.20

Money Saved: $457.80

Yamato DNF-601 Programmable Energy Saving Forced / Natural Convection Oven 150L, 115V

Circulation method	Forced convection + Natural convection
External temp. range	5~35°C
Temperature set range	0~130°C (Wind velocity: 0), 0~270°C (Wind velocity: 1~10)
Temperature control range	RT +25~120°C (Wind velocity: 0), RT +15~260°C (Wind velocity: 1~10)
Temp. control accuracy *¹	Forced convection: ±0.3°C (at 260°C) Natural convection: ±0.3°C (at 120°C)
Temp. fluctuation *¹	Forced convection: ±0.5°C (at 260°C) Natural convection: ±0.6°C (at 120°C)
Temp. distribution precision *¹	Forced convection: ±2.5°C (at 260°C) Natural convection: ±3°C (at 120°C)
Temp. gradient *¹	Forced convection: 8°C (at 260°C) Natural convection: 13°C (at 120°C)
Temp. rise time *¹	Forced convection: ~100min. Natural convection:~25min.
Chamber / Exterior / Insulation	Stainless steel / Cold rolled steel paneling, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater (stainless steel tube)	0.83kWx2
Wind velocity adjusting system	10 steps (600~1500rpm) + Wind velocity (0)
Damper	Circulation-Ventilation Manual switching: Interlocked intake and exhaust system (Complete exhaust applicable / Unable to reach 260°C with damper fully open)
Cable port	Inner diameter: 33mm×1 (right side)
Exhaust port	Outer diameter: 50mm×1 (back side)
Inlet port	Inner diameter: 33mm×1 (right side)
Controller	Model V type
Temperature control / setting system	PID Z control / Digital setting with ▲/▼ keys
Temperature display system	Temperature reading display: green 4-digit digital LED/Temperature setting display: orange 5-digit digital LED
Other indications	LED indicates temperature patterns for heating/stabilizing/cooling
Operating function	Fixed temperature operation, Program operation (maximum 99 steps or 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start)
Additional functions	Variable Air Flow Function, Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO 2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery
Temperature sensor	K type Thermocouple double sensor (for temperature control and independent overheat prevention device)
Heater control	Triac with Zero-cross Control
Control board	Self-diagnostic Functions (Detection for Temp. Sensor Failure, TRIAC Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Door switch	Door open: fan motor and heater circuit OFF, Door close: fan motor and heater circuit ON
Internal dimensions (W×D×H mm)*²	600×500×500
External dimensions (W×D×H mm)*²	730×695×940
Capacity	150L
Weight	~90kg
Number of shelf bracket step / pitch	13 steps/30mm
Withstand load of shelf	15kg/shelf
Power supply V±10% 50/60Hz Single phase	AC115V 15A (with plug)

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $6,830.00

Our Price: $5,798.00

Money Saved: $1,032.00

Company

My Account

Quick Links