Warm Air Incubators

Boekel Scientific 260700 Microplate Incubator, 115V

Chamber Volume	0.1 cu. ft.
Chamber Dimensions (in.)	7-1/4 x 5-1/4 x 6-3/4
W x D x H (cm)	18.4 x 13.3 x 17.1
Temperature Range	Ambient +5°C to 42°C
Dimensions (in.)	7-3/4 x 7-1/4 x 6-1/4
W x D x H (cm)	19.7 x 18.4 x 15.9
Shipping Weight	8 lbs./3.6 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $418.81

Our Price: $406.25

Sale Price: $348.90

Money Saved: $69.91

Benchmark H2200-H MyTemp Mini Digital Incubator

Temperature Range	Ambient +5C to 75C
Temperature Accuracy	±0.5C
Temperature Uniformity	±1.5C
Temperature Increment	1C
Capacity	20 L (0.75 cu ft)
Interior Dimensions (W x D x H)	10.3 x 9.3 x 12.8 in (26 x 23.5 x 32.5 cm)
Exterior Dimensions (W x D x H)	13.2 x 14.5 x 18.7 in (33.5 x 37 x 47.5 cm)
Electrical Requirements	100-240V, 50/60Hz

Usually Ships in 24 Hours

Manufacturer's List Price: $596.55

Our Price: $507.07

Money Saved: $89.48

Boekel Scientific 132000 Incubator, Analog 0.8cf capacity, see-thru door, 115V

Chamber Volume	0.8 cu. ft.
Chamber Dimensions. (in.)	11-1/2 x 12 x 10-1/2
W x D x H (cm)	29.2 x 30.5 x 26.7
Temperature Range	Ambient +5°C to 60°C
Stability @ 37°C	±1.5°C
Uniformity @ 37°C	±1°C
Shelves Included	2
Max. No. Shelves*	4
Shelf Area	1.7 ft.2
Dimensions (in.)	13 x 14 x 16-1/4
W x D x H (cm)	33 x 35.6 x 41.3
Shipping Weight	23 lb./10.4 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $682.55

Our Price: $662.07

Sale Price: $608.32

Money Saved: $74.23

Yamato IC-103C General Purpose Benchtop Incubator 37L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Stainless steel heating pipe, 0.2kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	350 x 300 x 360 mm
External dimensions WxDxH	430 x 397 x 606 mm
Internal capacity	37L
Inner door	None
Shelf load capacity	~15 kg/pc.
Shelf rest step number	8 steps
Power supply (50/60 Hz)	AC115V 1.8A (with plug)
Weight	~17 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $820.00

Our Price: $771.00

Money Saved: $49.00

Yamato IC-103CW General Purpose Benchtop Incubator with Window 37L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Stainless steel heating pipe, 0.2kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	350 x 300 x 360 mm
External dimensions WxDxH	430 x 397 x 606 mm
Internal capacity	37L
Inner door	None
Shelf load capacity	~15 kg/pc.
Shelf rest step number	8 steps
Power supply (50/60 Hz)	AC115V 1.8A (with plug)
Weight	~17 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $850.00

Our Price: $799.00

Money Saved: $51.00

Boekel Scientific 133001 Incubator, Digital, 0.8cf capacity, solid door w/lock, 115V

Chamber Volume	0.8 cu. ft.
Chamber Dimen. (in.)	11-1/2 x 12 x 10-1/2
W x D x H (cm)	29.2 x 30.5 x 26.7
Temperature Range	Ambient +5°C to 60°C
Stability @ 37°C	±1.5°C
Uniformity @ 37°C	±1°C
Shelves Included	2
Max. No. Shelves*	4
Shelf Area	1.7 ft.2
Dimensions (in.)	13 x 14 x 16-1/4
W x D x H (cm)	33 x 35.6 x 41.3
Shipping Weight	22 lb./10 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,052.17

Our Price: $1,020.60

Sale Price: $940.67

Money Saved: $111.50

Yamato IC-403CW General Purpose Incubator with Window 97L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0,3kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	450 × 480 × 450 mm
External dimensions WxDxH	560 × 606 × 820 mm
Internal capacity	97L
Inner door	Reinforced glass door x 1
Shelf load capacity	~15 kg/pc.
Shelf rest step number	9 steps
Power supply (50/60 Hz)	AC115V 4.5A(with plug)
Weight	~45 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,220.00

Our Price: $1,147.00

Money Saved: $73.00

Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0,3kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	450 × 480 × 450 mm
External dimensions WxDxH	560 × 606 × 820 mm
Internal capacity	97L
Inner door	Reinforced glass door x 1
Shelf load capacity	~15 kg/pc.
Shelf rest step number	9 steps
Power supply (50/60 Hz)	AC115V 4.5A(with plug)
Weight	~45 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,425.00

Our Price: $1,340.00

Money Saved: $85.00

Boekel Scientific 151050 Digital Forced Air Incubator, 0.5 cu. ft. w/ Removable Light Shield, 115V

Temperature Range	Ambient +8°C to 70°C
Temperature Uniformity	± 1.0°C at 37°C
Temperature Stability	± 0.2°C
Temperature Display Resolution	0.1°C
Chamber Volume	0.5 cu. ft. (14L)
Timer Resolution	1 second
Number of Shelves	1
Maximum Load per Shelf	10 lb. (4.5 kg)
Chamber Dimensions (W x D x H)	9.5 x 9.75 x 9.5 in. (24.13 x 24.77 x 24.13 cm)
Overall Dimensions (W x D x H)	11.75 x 15.25 x 16.5 in. (29.85 x 38.74 x 41.91 cm)
Weight	27 lb. (12.3 kg)
Electrical Requirements	115V, 50/60Hz, 250W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,564.02

Our Price: $1,517.10

Sale Price: $1,396.86

Money Saved: $167.16

Boekel Scientific 135000 TTT Incubator, 115V

Chamber Volume	0.34 cu. ft.
Chamber Dimen. (in.)	12.0 x 6.0 x 8.0
W x D x H (cm)	30.5 x 15.2 x 20.3
Temperature Range	Ambient+8°C to 70°C
Stability @ 37°C	±0.5°C
Uniformity @ 37°C	±0.2°C
Shelves Included	1
Outside Dimensions (in)	14.0 x 12-1/2 x 12-1/2
W x D x H (cm)	35.6 x 31.8 x 31.8
Stackable	Yes
Conformity	UL, CSA, CE
Shipping Weight	24 lbs./10.9 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,705.50

Our Price: $1,654.34

Sale Price: $1,398.16

Money Saved: $307.34

Memmert IN30 Natural Convection Incubator 32L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Volume	32 L (1.1 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	1 stainless steel grid, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	3
Max. Loading of Chamber	132 lbs
Max. Loading per Shelf	44 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	15.7 x 12.6 x 9.8 inches
Exterior Dimensions (WxHxD)	23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight	Approx. 106 lbs
Gross Weight (Carton)	Approx. 142 lbs
Electrical Data	115 V, 50/60 Hz, approx. 800 W / 7 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,670.00

Our Price: $1,670.00

Sale Price: $1,603.20

Money Saved: $66.80

Yamato IC-603CW General Purpose Incubator with Window 159L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0.4kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	600 x 530 x 500 mm
External dimensions WxDxH	710 x 656 x 870 mm
Internal capacity	159L
Inner door	Reinforced glass door x 1
Shelf load capacity	~15 kg/pc.
Shelf rest step number	12 steps
Power supply (50/60 Hz)	AC115V 6A (with plug)
Weight	~65 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,780.00

Our Price: $1,673.00

Money Saved: $107.00

Boekel Scientific 151140 Digital Forced Air Incubator, 1.4 cu. ft. w/ Removable Light Shield, 115V

Temperature Range	Ambient +8°C to 70°C
Temperature Uniformity	± 1.0°C at 37°C
Temperature Stability	± 0.2°C
Temperature Display Resolution	0.1°C
Chamber Volume	1.4 cu. ft. (40L)
Timer Resolution	1 second
Number of Shelves	2
Maximum Load per Shelf	10 lb. (4.5 kg)
Chamber Dimensions (W x D x H)	13.5 x 13.5 x 13.5 in. (34.29 x 34.29 x 34.29 cm)
Overall Dimensions (W x D x H)	16 x 19 x 20.5 in. (40.64 x 48.26 x 52.07 cm)
Weight	40 lb. (18.1 kg)
Electrical Requirements	115V, 50/60Hz, 500W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,911.22

Our Price: $1,853.88

Sale Price: $1,688.09

Money Saved: $223.13

Benchmark SureTemp Dual Convection 40L Incubator

Benchmark H2505-40 SureTemp Dual Convection 40L Incubator

Temperature Range	Ambient +5C to 75C
Temperature Accuracy	±0.25C
Temperature Uniformity	±0.25C
Temperature Increments	0.1C
Temperature Stability	±0.1C
Timer	1 min to 48 hrs, continuous
Interior Dimensions (W x D x H)	13.7 x 13.7 x 13.7 in (35 x 35 x 35 cm)
Exterior Dimensions (W x D x H)	22.4 x 23.3 x 22.8 in (57 x 59.2 x 58 cm)
Electrical Requirements	120V, 50/60Hz

Usually Ships in 24 Hours

Manufacturer's List Price: $2,019.58

Our Price: $1,716.64

Money Saved: $302.94

Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0.4kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	600 x 530 x 500 mm
External dimensions WxDxH	710 x 656 x 870 mm
Internal capacity	159L
Inner door	Reinforced glass door x 1
Shelf load capacity	~15 kg/pc.
Shelf rest step number	12 steps
Power supply (50/60 Hz)	AC115V 6A (with plug)
Weight	~65 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,880.00

Our Price: $1,767.00

Money Saved: $113.00

Memmert IN55 Natural Convection Incubator 53L, 115V

Setting Temperature Range	Min. 5°C above ambient up to +80°C
Working Temperature Range	At least 5°C above ambient to +80°C
Volume	53 L (1.9 cu.ft.)
Setting Resolution (temperature)	0.1°C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Convection	Natural convection
Fresh Air	Adjustment of pre-heated fresh air by electronically controlled air flap in 10% steps
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for data management via Ethernet interface (trial version available for download). USB stick with AtmoCONTROL software available as an accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 per DIN 12880
Door	Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep-drawn ribbing and integrated large-area heating on four sides
Max. Loading of Chamber	176 lbs
Housing	Rear zinc-plated steel
Interior Dimensions (WxHxD)	15.8” x 15.8” x 13”
Exterior Dimensions (WxHxD)	23” x 30.9” x 20.2”
Net Weight	Approx. 106 lbs
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 7.4 amps

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,063.00

Our Price: $2,063.00

Sale Price: $1,980.48

Money Saved: $82.52

Memmert IF30 Forced Circulation Incubator 32L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	32 L (1.1 cu.ft.)
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation	Program stored in case of power failure
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	3
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	132 lbs
Interior Dimensions (WxHxD)	15.8” x 12.6” x 9.8” (40 x 32 x 25 cm)
Exterior Dimensions (WxHxD)	23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight	Approx. 106 lbs
Electrical Data	115 V, 50/60 Hz, approx. 800 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,079.00

Our Price: $2,079.00

Sale Price: $1,995.84

Money Saved: $83.16

Benchmark SureTemp Dual Convection 70L Incubator

Benchmark H2505-70 SureTemp Dual Convection 70L Incubator

Temperature Range	Ambient +5C to 75C
Temperature Accuracy	±0.25C
Temperature Uniformity	±0.25C
Temperature Increments	0.1C
Temperature Stability	±0.1C
Timer	1 min to 48 hrs, continuous
Interior Dimensions (W x D x H)	17.7 x 13.7 x 17.7 in (45 x 35 x 45 cm)
Exterior Dimensions (W x D x H)	26.4 x 23.3 x 26.8 in (67 x 59.2 x 68 cm)
Electrical Requirements	120V, 50/60Hz

Usually Ships in 24 Hours

Manufacturer's List Price: $2,603.43

Our Price: $2,212.92

Money Saved: $390.51

Memmert IN75 Natural Convection Incubator 74L, 115V

Setting Temperature Range	Min. 5°C above ambient up to +80°C
Working Temperature Range	At least 5°C above ambient to +80°C
Volume	74 L (2.6 cu.ft.)
Setting Resolution (temperature)	0.1°C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Convection	Natural convection
Fresh Air	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door	Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	2
Max. Loading of Chamber	264 lbs
Max. Loading per Shelf	44 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	15.8 x 22 x 13 inches
Exterior Dimensions (WxHxD)	23 x 37.2 x 20.2 inches
Net Weight	Approx. 106 lbs
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 9.6 amps

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,443.00

Our Price: $2,443.00

Sale Price: $2,345.28

Money Saved: $97.72

Boekel Scientific 151250 Digital Forced Air Incubator, 2.5 cu. ft. w/ Removable Light Shield, 115V

Temperature Range	Ambient +8°C to 70°C
Temperature Uniformity	± 1.0°C at 37°C
Temperature Stability	± 0.2°C
Temperature Display Resolution	0.1°C
Chamber Volume	2.5 cu. ft. (71L)
Timer Resolution	1 second
Number of Shelves	3
Maximum Load per Shelf	10 lb. (4.5 kg)
Chamber Dimensions (W x D x H)	17 x 17 x 15 in. (43.18 x 43.18 x 38.1 cm)
Overall Dimensions (W x D x H)	19.5 x 22.75 x 21.75 in. (49.53 x 57.79 x 55.25 cm)
Weight	55 lb. (24.9 kg)
Electrical Requirements	115V, 50/60Hz, 550W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,717.57

Our Price: $2,636.04

Sale Price: $2,378.23

Money Saved: $339.34

IKA INC 125 F Digital Incubator

Heat output	750 W
Working temperature	room temp. +8 - 100 °C
Adjustment and display resolution	0.1 K
Temperature stability (37°C @22°C)	±0.3 K
Temperature homogeneity (37°C @22°C)	±0.3 K
Temperature heat up time (37°C @22°C)	8 min
Temperature door recovery (37°C @22°C)	3 min
Temperature display	yes
Display	LCD
Timer	yes
Timer display	LCD
Time setting max.	100 d
Number of trays max.	6
Load for one tray max.	20 kg
Operating area inner chamber	550 x 550 x 415 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Thermal safety devices according DIN 12880	TB class 1
Set-point limiter with safety shutdown	yes
Inner glasdoor	yes
Temperature sensor control	PT 100 4 wire
Cleaning thermal decontamination (120°C)	yes
Power consumption at 37°C	75 Wh/h
Dimensions (W x H x D)	700 x 720 x 635 mm
Weight	60 kg
Permissible ambient temperature	15 - 32 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
USB interface	yes
Voltage	100 - 120 V
Frequency	50/60 Hz
Power input	800 W
Power input max.	800 W
Power input standby	2 W
Fuse	2x T10A 250V

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,564.00

Our Price: $2,499.90

Sale Price: $2,435.80

Money Saved: $128.20

Memmert IF55 Forced Circulation Incubator 53L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	53 L (1.9 cu.ft.)
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT	The process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation	Program stored in case of power failure
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	4
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	176 lbs
Interior Dimensions (WxHxD)	15.8” x 15.8” x 13” (40 x 40 x 33 cm)
Exterior Dimensions (WxHxD)	23” x 30.9” x 20.2” (58.5 x 78.4 x 51.4 cm)
Net Weight	Approx. 126 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $2,686.00

Our Price: $2,686.00

Sale Price: $2,578.56

Money Saved: $107.44

Boekel Scientific 151500 Digital Forced Air Incubator, 5.0 cu. ft. w/ Removable Light Shield, 115V

Temperature Range	Ambient +8°C to 70°C
Temperature Uniformity	± 1.0°C at 37°C
Temperature Stability	± 0.2°C
Temperature Display Resolution	0.1°C
Chamber Volume	5.0 cu. ft. (141L)
Timer Resolution	1 second
Number of Shelves	3
Maximum Load per Shelf	10 lb. (4.5 kg)
Chamber Dimensions (W x D x H)	17 x 17 x 30 in. (43.18 x 43.18 x 76.2 cm)
Overall Dimensions (W x D x H)	19.5 x 22.75 x 37 in. (49.53 x 57.79 x 93.98 cm)
Weight	81 lb. (36.7 kg)
Electrical Requirements	115V, 50/60Hz, 1050W

Manufacturer's List Price: $3,025.85

Our Price: $2,935.07

Sale Price: $2,656.94

Money Saved: $368.91

Memmert IN30plus Natural Convection Incubator 32L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	32 L (1.1 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	1 stainless steel grid, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	3
Max. Loading of Chamber	132 lbs (60 kg)
Max. Loading per Shelf	44 lbs (20 kg)
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	15.7 x 12.6 x 9.8 inches
Exterior Dimensions (WxHxD)	23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight	Approx. 106 lbs
Electrical Data	115 V, 50/60 Hz, approx. 800 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,789.00

Our Price: $2,789.00

Sale Price: $2,677.44

Money Saved: $111.56

Memmert IN110 Natural Convection Incubator 108L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5 above ambient temperature to +80 °C
Volume	108 L (3.8 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door	Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	5
Max. Loading of Chamber	385 lbs
Max. Loading per Shelf	44 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	22 x 18.9 x 15.7 inches
Exterior Dimensions (WxHxD)	29.3 x 34 x 23 inches (d +2.2” door handle)
Net Weight	Approx. 106 lbs
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,883.00

Our Price: $2,883.00

Sale Price: $2,767.68

Money Saved: $115.32

Memmert IF30plus Forced Circulation Incubator 32L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	32 L (1.1 cu.ft.)
Temperature Sensor	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program	Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent	Vent connection with restrictor flap
Documentation	Program stored in case of power failure
Temperature Control	Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY	Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	3
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	132 lbs
Interior Dimensions (WxHxD)	15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm)
Exterior Dimensions (WxHxD)	23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight	Approx. 106 lbs
Electrical Data	115 V, 50/60 Hz, approx. 800 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $3,002.00

Our Price: $3,002.00

Sale Price: $2,881.92

Money Saved: $120.08

Memmert IF75 Forced Circulation Incubator 74L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	74 L (2.6 cu.ft.)
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation	Program stored in case of power failure
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	6
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	264 lbs
Interior Dimensions (WxHxD)	15.8” x 22” x 13” (40 x 56 x 33 cm)
Exterior Dimensions (WxHxD)	23” x 37.2” x 20.2” (58.5 x 94.4 x 51.4 cm)
Net Weight	Approx. 146 lbs
Electrical Data	115 V, 50/60 Hz, approx. 800 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $3,056.00

Our Price: $3,056.00

Sale Price: $2,933.76

Money Saved: $122.24

Benchmark SureTemp Dual Convection 130L Incubator

Benchmark H2505-130 SureTemp Dual Convection 130L Incubator

Temperature Range	Ambient +5C to 75C
Temperature Accuracy	±0.25C
Temperature Uniformity	±0.25C
Temperature Increments	0.1C
Temperature Stability	±0.1C
Timer	1 min to 48 hrs, continuous
Interior Dimensions (W x D x H)	21.7 x 17.7 x 21.7 in (55 x 45 x 55 cm)
Exterior Dimensions (W x D x H)	30.3 x 27.2 x 30.7 in (77 x 69.2 x 78 cm)
Electrical Requirements	120V, 50/60Hz

Usually Ships in 24 Hours

Manufacturer's List Price: $3,471.62

Our Price: $2,950.88

Money Saved: $520.74

Memmert IN55plus Natural Convection Incubator 53L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	53 L (1.9 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	1 stainless steel grid, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	4
Max. Loading of Chamber	176 lbs (80 kg)
Max. Loading per Shelf	44 lbs (20 kg)
Housing	Rear zinc-plated steel
Interior Dimensions (WxHxD)	15.8 x 15.8 x 13 inches
Exterior Dimensions (WxHxD)	23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight	Approx. 126 lbs
Electrical Load	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $3,148.00

Our Price: $3,148.00

Sale Price: $3,022.08

Money Saved: $125.92

Memmert IN75plus Natural Convection Incubator 74L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	74 L (2.6 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	2 stainless steel grids, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	6
Max. Loading of Chamber	264 lbs (120 kg)
Max. Loading per Shelf	44 lbs (20 kg)
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	15.7 x 22 x 13 inches
Exterior Dimensions (WxHxD)	23 x 37.2 x 20.2 inches (d +2.2” door handle)
Net Weight	Approx. 146 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $3,551.00

Our Price: $3,551.00

Sale Price: $3,408.96

Money Saved: $142.04

Company

My Account

Quick Links