Home > Max. Incubator Temp. > 71C to 80C
Sort By:
Page of 2
Benchmark MyTemp Mini Digital Incubator Benchmark H2200-H MyTemp Mini Digital Incubator

Temperature Range

Ambient +5C to 75C

Temperature Accuracy

±0.5C

Temperature Uniformity

±1.5C

Temperature Increment

1C

Capacity

20 L (0.75 cu ft)

Interior Dimensions (W x D x H)

10.3 x 9.3 x 12.8 in (26 x 23.5 x 32.5 cm)

Exterior Dimensions (W x D x H)

13.2 x 14.5 x 18.7 in (33.5 x 37 x 47.5 cm)

Electrical Requirements

100-240V, 50/60Hz

Manufacturer's List Price: $596.55
Our Price: $507.07
Money Saved: $89.48
Yamato IC-103C General Purpose Benchtop Incubator 37L, 115V Yamato IC-103C General Purpose Benchtop Incubator 37L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Stainless steel heating pipe, 0.2kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 350 x 300 x 360 mm
External dimensions WxDxH 430 x 397 x 606 mm
Internal capacity 37L
Inner door None
Shelf load capacity ~15 kg/pc.
Shelf rest step number 8 steps
Power supply (50/60 Hz) AC115V 1.8A (with plug)
Weight ~17 kg

Manufacturer's List Price: $820.00
Our Price: $771.00
Money Saved: $49.00
Yamato IC-103CW General Purpose Benchtop Incubator with Window 37L, 115V Yamato IC-103CW General Purpose Benchtop Incubator with Window 37L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Stainless steel heating pipe, 0.2kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 350 x 300 x 360 mm
External dimensions WxDxH 430 x 397 x 606 mm
Internal capacity 37L
Inner door None
Shelf load capacity ~15 kg/pc.
Shelf rest step number 8 steps
Power supply (50/60 Hz) AC115V 1.8A (with plug)
Weight ~17 kg

Manufacturer's List Price: $850.00
Our Price: $799.00
Money Saved: $51.00
Yamato IC-403CW General Purpose Incubator with Window 97L, 115V Yamato IC-403CW General Purpose Incubator with Window 97L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0,3kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 450 × 480 × 450 mm
External dimensions WxDxH 560 × 606 × 820 mm
Internal capacity 97L
Inner door Reinforced glass door x 1
Shelf load capacity ~15 kg/pc.
Shelf rest step number 9 steps
Power supply (50/60 Hz) AC115V 4.5A(with plug)
Weight ~45 kg

Manufacturer's List Price: $1,220.00
Our Price: $1,147.00
Money Saved: $73.00
Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V Yamato IC-403CR General Purpose Incubator with Communication Port 97L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0,3kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 450 × 480 × 450 mm
External dimensions WxDxH 560 × 606 × 820 mm
Internal capacity 97L
Inner door Reinforced glass door x 1
Shelf load capacity ~15 kg/pc.
Shelf rest step number 9 steps
Power supply (50/60 Hz) AC115V 4.5A(with plug)
Weight ~45 kg

Manufacturer's List Price: $1,425.00
Our Price: $1,340.00
Money Saved: $85.00
Memmert IN30 Natural Convection Incubator 32L, 115V Memmert IN30 Natural Convection Incubator 32L, 115V

Setting Temperature Range +20 to +80 °C
Working Temperature Range At least 5°C above ambient temperature to +80 °C
Volume 32 L (1.1 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving 1 stainless steel grid, electropolished
Works Calibration Certificate Includes works calibration certificate for +37°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 3
Max. Loading of Chamber 132 lbs
Max. Loading per Shelf 44 lbs
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 15.7 x 12.6 x 9.8 inches
Exterior Dimensions (WxHxD) 23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight Approx. 106 lbs
Gross Weight (Carton) Approx. 142 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W / 7 A

Manufacturer's List Price: $1,670.00
Our Price: $1,670.00
Sale Price: $1,603.20
Money Saved: $66.80
Yamato IC-603CW General Purpose Incubator with Window 159L, 115V Yamato IC-603CW General Purpose Incubator with Window 159L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0.4kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 600 x 530 x 500 mm
External dimensions WxDxH 710 x 656 x 870 mm
Internal capacity 159L
Inner door Reinforced glass door x 1
Shelf load capacity ~15 kg/pc.
Shelf rest step number 12 steps
Power supply (50/60 Hz) AC115V 6A (with plug)
Weight ~65 kg

Manufacturer's List Price: $1,780.00
Our Price: $1,673.00
Money Saved: $107.00
Benchmark SureTemp Dual Convection 40L Incubator Benchmark H2505-40 SureTemp Dual Convection 40L Incubator

Temperature Range

Ambient +5C to 75C

Temperature Accuracy

±0.25C

Temperature Uniformity

±0.25C

Temperature Increments

0.1C

Temperature Stability

±0.1C

Timer

1 min to 48 hrs, continuous

Interior Dimensions (W x D x H)

13.7 x 13.7 x 13.7 in (35 x 35 x 35 cm)

Exterior Dimensions (W x D x H)

22.4 x 23.3 x 22.8 in (57 x 59.2 x 58 cm)

Electrical Requirements

120V, 50/60Hz

Manufacturer's List Price: $2,019.58
Our Price: $1,716.64
Money Saved: $302.94
Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0.4kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 600 x 530 x 500 mm
External dimensions WxDxH 710 x 656 x 870 mm
Internal capacity 159L
Inner door Reinforced glass door x 1
Shelf load capacity ~15 kg/pc.
Shelf rest step number 12 steps
Power supply (50/60 Hz) AC115V 6A (with plug)
Weight ~65 kg

Manufacturer's List Price: $1,880.00
Our Price: $1,767.00
Money Saved: $113.00
Memmert IN55 Natural Convection Incubator 53L, 115V Memmert IN55 Natural Convection Incubator 53L, 115V

Setting Temperature Range Min. 5°C above ambient up to +80°C
Working Temperature Range At least 5°C above ambient to +80°C
Volume 53 L (1.9 cu.ft.)
Setting Resolution (temperature) 0.1°C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Convection Natural convection
Fresh Air Adjustment of pre-heated fresh air by electronically controlled air flap in 10% steps
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for data management via Ethernet interface (trial version available for download). USB stick with AtmoCONTROL software available as an accessory
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 per DIN 12880
Door Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior Easy-to-clean stainless steel, reinforced with deep-drawn ribbing and integrated large-area heating on four sides
Max. Loading of Chamber 176 lbs
Housing Rear zinc-plated steel
Interior Dimensions (WxHxD) 15.8” x 15.8” x 13”
Exterior Dimensions (WxHxD) 23” x 30.9” x 20.2”
Net Weight Approx. 106 lbs
Electrical Data 115 V (± 10%), 50/60 Hz, approx. 7.4 amps

Manufacturer's List Price: $2,063.00
Our Price: $2,063.00
Sale Price: $1,980.48
Money Saved: $82.52
Memmert IF30 Forced Circulation Incubator 32L, 115V Memmert IF30 Forced Circulation Incubator 32L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 32 L (1.1 cu.ft.)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation Program stored in case of power failure
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 3
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 132 lbs
Interior Dimensions (WxHxD) 15.8” x 12.6” x 9.8” (40 x 32 x 25 cm)
Exterior Dimensions (WxHxD) 23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight Approx. 106 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W

Manufacturer's List Price: $2,079.00
Our Price: $2,079.00
Sale Price: $1,995.84
Money Saved: $83.16
Benchmark SureTemp Dual Convection 70L Incubator Benchmark H2505-70 SureTemp Dual Convection 70L Incubator

Temperature Range

Ambient +5C to 75C

Temperature Accuracy

±0.25C

Temperature Uniformity

±0.25C

Temperature Increments

0.1C

Temperature Stability

±0.1C

Timer

1 min to 48 hrs, continuous

Interior Dimensions (W x D x H)

17.7 x 13.7 x 17.7 in (45 x 35 x 45 cm)

Exterior Dimensions (W x D x H)

26.4 x 23.3 x 26.8 in (67 x 59.2 x 68 cm)

Electrical Requirements

120V, 50/60Hz

Manufacturer's List Price: $2,603.43
Our Price: $2,212.92
Money Saved: $390.51
Memmert IN75 Natural Convection Incubator 74L, 115V Memmert IN75 Natural Convection Incubator 74L, 115V

Setting Temperature Range Min. 5°C above ambient up to +80°C
Working Temperature Range At least 5°C above ambient to +80°C
Volume 74 L (2.6 cu.ft.)
Setting Resolution (temperature) 0.1°C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Convection Natural convection
Fresh Air Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 2
Max. Loading of Chamber 264 lbs
Max. Loading per Shelf 44 lbs
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 15.8 x 22 x 13 inches
Exterior Dimensions (WxHxD) 23 x 37.2 x 20.2 inches
Net Weight Approx. 106 lbs
Electrical Data 115 V (± 10%), 50/60 Hz, approx. 9.6 amps

Manufacturer's List Price: $2,443.00
Our Price: $2,443.00
Sale Price: $2,345.28
Money Saved: $97.72
Memmert IF55 Forced Circulation Incubator 53L, 115V Memmert IF55 Forced Circulation Incubator 53L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 53 L (1.9 cu.ft.)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation Program stored in case of power failure
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 4
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 176 lbs
Interior Dimensions (WxHxD) 15.8” x 15.8” x 13” (40 x 40 x 33 cm)
Exterior Dimensions (WxHxD) 23” x 30.9” x 20.2” (58.5 x 78.4 x 51.4 cm)
Net Weight Approx. 126 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $2,686.00
Our Price: $2,686.00
Sale Price: $2,578.56
Money Saved: $107.44
Memmert IN30plus Natural Convection Incubator 32L, 115V Memmert IN30plus Natural Convection Incubator 32L, 115V

Setting Temperature Range +20 to +80 °C
Working Temperature Range At least 5°C above ambient temperature to +80 °C
Internal Volume 32 L (1.1 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving 1 stainless steel grid, electropolished
Works Calibration Certificate Includes works calibration certificate for +37°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 3
Max. Loading of Chamber 132 lbs (60 kg)
Max. Loading per Shelf 44 lbs (20 kg)
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 15.7 x 12.6 x 9.8 inches
Exterior Dimensions (WxHxD) 23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight Approx. 106 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W

Manufacturer's List Price: $2,789.00
Our Price: $2,789.00
Sale Price: $2,677.44
Money Saved: $111.56
Memmert IN110 Natural Convection Incubator 108L, 115V Memmert IN110 Natural Convection Incubator 108L, 115V

Setting Temperature Range +20 to +80 °C
Working Temperature Range At least 5 above ambient temperature to +80 °C
Volume 108 L (3.8 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 5
Max. Loading of Chamber 385 lbs
Max. Loading per Shelf 44 lbs
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 22 x 18.9 x 15.7 inches
Exterior Dimensions (WxHxD) 29.3 x 34 x 23 inches (d +2.2” door handle)
Net Weight Approx. 106 lbs
Electrical Data 115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A

Manufacturer's List Price: $2,883.00
Our Price: $2,883.00
Sale Price: $2,767.68
Money Saved: $115.32
Memmert IF30plus Forced Circulation Incubator 32L, 115V Memmert IF30plus Forced Circulation Incubator 32L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 32 L (1.1 cu.ft.)
Temperature Sensor 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent Vent connection with restrictor flap
Documentation Program stored in case of power failure
Temperature Control Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 3
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 132 lbs
Interior Dimensions (WxHxD) 15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm)
Exterior Dimensions (WxHxD) 23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight Approx. 106 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W

Manufacturer's List Price: $3,002.00
Our Price: $3,002.00
Sale Price: $2,881.92
Money Saved: $120.08
Memmert IF75 Forced Circulation Incubator 74L, 115V Memmert IF75 Forced Circulation Incubator 74L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 74 L (2.6 cu.ft.)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation Program stored in case of power failure
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 6
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 264 lbs
Interior Dimensions (WxHxD) 15.8” x 22” x 13” (40 x 56 x 33 cm)
Exterior Dimensions (WxHxD) 23” x 37.2” x 20.2” (58.5 x 94.4 x 51.4 cm)
Net Weight Approx. 146 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W

Manufacturer's List Price: $3,056.00
Our Price: $3,056.00
Sale Price: $2,933.76
Money Saved: $122.24
Benchmark SureTemp Dual Convection 130L Incubator Benchmark H2505-130 SureTemp Dual Convection 130L Incubator

Temperature Range

Ambient +5C to 75C

Temperature Accuracy

±0.25C

Temperature Uniformity

±0.25C

Temperature Increments

0.1C

Temperature Stability

±0.1C

Timer

1 min to 48 hrs, continuous

Interior Dimensions (W x D x H)

21.7 x 17.7 x 21.7 in (55 x 45 x 55 cm)

Exterior Dimensions (W x D x H)

30.3 x 27.2 x 30.7 in (77 x 69.2 x 78 cm)

Electrical Requirements

120V, 50/60Hz

Manufacturer's List Price: $3,471.62
Our Price: $2,950.88
Money Saved: $520.74
Memmert IN55plus Natural Convection Incubator 53L, 115V Memmert IN55plus Natural Convection Incubator 53L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range At least 5°C above ambient temperature to +80 °C
Internal Volume 53 L (1.9 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving 1 stainless steel grid, electropolished
Works Calibration Certificate Includes works calibration certificate for +37°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 4
Max. Loading of Chamber 176 lbs (80 kg)
Max. Loading per Shelf 44 lbs (20 kg)
Housing Rear zinc-plated steel
Interior Dimensions (WxHxD) 15.8 x 15.8 x 13 inches
Exterior Dimensions (WxHxD) 23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight Approx. 126 lbs
Electrical Load 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $3,148.00
Our Price: $3,148.00
Sale Price: $3,022.08
Money Saved: $125.92
Memmert IN75plus Natural Convection Incubator 74L, 115V Memmert IN75plus Natural Convection Incubator 74L, 115V

Setting Temperature Range +20 to +80 °C
Working Temperature Range At least 5°C above ambient temperature to +80 °C
Internal Volume 74 L (2.6 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving 2 stainless steel grids, electropolished
Works Calibration Certificate Includes works calibration certificate for +37°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 6
Max. Loading of Chamber 264 lbs (120 kg)
Max. Loading per Shelf 44 lbs (20 kg)
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 15.7 x 22 x 13 inches
Exterior Dimensions (WxHxD) 23 x 37.2 x 20.2 inches (d +2.2” door handle)
Net Weight Approx. 146 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $3,551.00
Our Price: $3,551.00
Sale Price: $3,408.96
Money Saved: $142.04
Memmert IF55plus Forced Circulation Incubator 53L, 115V Memmert IF55plus Forced Circulation Incubator 53L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 53 L (1.9 cu.ft.)
Temperature Sensor 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent Vent connection with restrictor flap
Documentation Program stored in case of power failure
Temperature Control Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 4
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 176 lbs
Interior Dimensions (WxHxD) 15.8” x 15.8” x 13” (40 x 40 x 33 cm)
Exterior Dimensions (WxHxD) 23” x 30.9” x 20.2” (58.5 x 78.4 x 51.4 cm)
Net Weight Approx. 126 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $3,586.00
Our Price: $3,586.00
Sale Price: $3,442.56
Money Saved: $143.44
Memmert IF110 Forced Circulation Incubator 108L, 115V Memmert IF110 Forced Circulation Incubator 108L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 108 L (3.8 cu.ft.)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation Program stored in case of power failure
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 5
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 385 lbs
Interior Dimensions (WxHxD) 22” x 18.9” x 15.8” (56 x 48 x 40 cm)
Exterior Dimensions (WxHxD) 29.3” x 34” x 23” (74.5 x 86.4 x 58.4 cm)
Net Weight Approx. 168 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $3,647.00
Our Price: $3,647.00
Sale Price: $3,501.12
Money Saved: $145.88
Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0.7kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 600 × 530 × 1000 mm
External dimensions WxDxH 710 × 656 × 1619 mm
Internal capacity 318L
Inner door Reinforced glass door x 2
Shelf load capacity ~15 kg/pc.
Shelf rest step number 29 steps
Power supply (50/60 Hz) AC115V 10A (with plug)
Weight ~102 kg

Manufacturer's List Price: $3,745.00
Our Price: $3,520.00
Money Saved: $225.00
Yamato IC-803CW General Purpose Incubator with Window 318L, 115V Yamato IC-803CW General Purpose Incubator with Window 318L, 115V

System Natural convection
Operating temp. range Room temp. +5~80°C
Temp. control accuracy ±0.5°C (at 37°C)
Temp. distribution accuracy ±1.0°C
Interior Stainless steel
Exterior Cold rolled steel plate with melamine resin baking finish
Heat insulator Glass fiber
Heater Iron-chrome wire heater, 0.7kW
Temperature controller PID control by microprocessor
Temperature setting system Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer 1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function Calibration off-set, Key-lock, Power outage compensation
Safety device Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit SSR drive system
Sensor K-thermocouple
Internal dimensions WxDxH 600 × 530 × 1000 mm
External dimensions WxDxH 710 × 656 × 1619 mm
Internal capacity 318L
Inner door Reinforced glass door x 2
Shelf load capacity ~15 kg/pc.
Shelf rest step number 29 steps
Power supply (50/60 Hz) AC115V 10A (with plug)
Weight ~102 kg

Manufacturer's List Price: $3,915.00
Our Price: $3,680.00
Money Saved: $235.00
Memmert IN160 Natural Convection Incubator 161L, 115V Memmert IN160 Natural Convection Incubator 161L, 115V

Setting Temperature Range +20 to +80 °C
Working Temperature Range At least 5 above ambient temperature to +80 °C
Volume 161 L (5.7 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 8
Max. Loading of Chamber 462 lbs
Max. Loading per Shelf 44 lbs
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 22 x 28.3 x 15.7 inches
Exterior Dimensions (WxHxD) 29.3 x 43.5 x 23 inches (d +2.2” door handle)
Net Weight Approx. 106 lbs
Electrical Data 115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A

Manufacturer's List Price: $3,836.00
Our Price: $3,836.00
Sale Price: $3,682.56
Money Saved: $153.44
Memmert IN110plus Natural Convection Incubator 108L, 115V Memmert IN110plus Natural Convection Incubator 108L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range At least 5°C above ambient temperature to +80 °C
Internal Volume 108 L (3.8 cu.ft.)
Setting Resolution (temperature) 0.1 °C
Temperature Sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT Process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, timer
Convection Natural convection
Fresh Air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving 2 stainless steel grids, electropolished
Works Calibration Certificate Includes works calibration certificate for +37°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 5
Max. Loading of Chamber 385 lbs (175 kg)
Max. Loading per Shelf 44 lbs (20 kg)
Housing Rear zinc-plated steel
Set Up Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD) 22 x 18.9 x 15.7 inches
Exterior Dimensions (WxHxD) 29.3 x 34 x 23 inches (d +2.2” door handle)
Net Weight Approx. 168 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $3,988.00
Our Price: $3,988.00
Sale Price: $3,828.48
Money Saved: $159.52
Memmert IF75plus Forced Circulation Incubator 74L, 115V Memmert IF75plus Forced Circulation Incubator 74L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 32 L (1.1 cu.ft.)
Temperature Sensor 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent Vent connection with restrictor flap
Documentation Program stored in case of power failure
Temperature Control Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 3
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 132 lbs
Interior Dimensions (WxHxD) 15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm)
Exterior Dimensions (WxHxD) 23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight Approx. 106 lbs
Electrical Data 115 V, 50/60 Hz, approx. 800 W

Manufacturer's List Price: $4,039.00
Our Price: $4,039.00
Sale Price: $3,877.44
Money Saved: $161.56
Memmert IF160 Forced Circulation Incubator 161L, 115V Memmert IF160 Forced Circulation Incubator 161L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 161 L (5.7 cu.ft.)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation Program stored in case of power failure
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 8
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 462 lbs
Interior Dimensions (WxHxD) 22 x 28.3 x 15.7 inches (56 x 72 x 40 cm)
Exterior Dimensions (WxHxD) 29.3 x 43.5 x 23 (d +2.2” door handle) (74.5 x 110.4 x 58.4 cm)
Net Weight Approx. 212 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $4,525.00
Our Price: $4,525.00
Sale Price: $4,344.00
Money Saved: $181.00
Memmert IF110plus Forced Circulation Incubator 108L, 115V Memmert IF110plus Forced Circulation Incubator 108L, 115V

Setting Temperature Range +20 to +80°C
Working Temperature Range Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature) 0.1°C
Volume 108 L (3.8 cu.ft.)
Temperature Sensor 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT The process time does not start until the set temperature is reached
Language Setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Fan Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent Vent connection with restrictor flap
Documentation Program stored in case of power failure
Temperature Control Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves 5
Max. Loading Per Shelf 44 lbs
Max. Loading of Chamber 385 lbs
Interior Dimensions (WxHxD) 22” x 18.9” x 15.8” (56 x 48 x 40 cm)
Exterior Dimensions (WxHxD) 29.3” x 34” x 23” (74.5 x 86.4 x 58.4 cm)
Net Weight Approx. 168 lbs
Electrical Data 115 V, 50/60 Hz, approx. 900 W

Manufacturer's List Price: $4,549.00
Our Price: $4,549.00
Sale Price: $4,367.04
Money Saved: $181.96