Oven Type

Yamato DX-302C Natural Convection Oven 28L, 115V

Circulation method	Natural convection
Operating temperature range	Room temp. +5°C to 300°C
Temperature control accuracy	±1°C (at 300°C)
Temperature distribution accuracy	±10°C (at 300°C)
Maximum temperature reaching time	~45 min (Room temp. to 300°C)
Interior material	Stainless steel
Exterior material	Electro-galvanized steel sheet with melamine resin baking finish
Heat insulating material	Glass wool
Heater	Iron-chrome wire heater 0.9 kW
Exhaust port	33 mm I.D. x 2 pcs. (on top)
Temp. controller	PID control by microprocessor
Temp. setting method	Digital setting by ▲▼ key
Temp. display method	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function	Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional function	Calibration off-set, Power failure compensation function, Key lock function
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal dimensions W×D×H	300x310x300mm
External dimensions W×D×H	400x440x630mm
Internal capacity	28L
Shelf plate with standard load	15kg/piece
Shelf rest step number / pitch	6 steps / 35mm
Power source 50/60Hz	AC115V 9.5A (with plug)
Weight	~23kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,610.00

Our Price: $1,393.00

Money Saved: $217.00

Yamato DX-402C Natural Convection Oven 74L, 115V

Circulation method	Natural convection
Operating temperature range	Room temp. +5°C to 300°C
Temperature control accuracy	±1°C (at 300°C)
Temperature distribution accuracy	±10°C (at 300°C)
Maximum temperature reaching time	~60 min (Room temp. to 300°C)
Interior material	Stainless steel
Exterior material	Electro-galvanized steel sheet with melamine resin baking finish
Heat insulating material	Glass wool
Heater	Iron-chrome wire heater 1.36 kW
Exhaust port	33 mm I.D. x 2 pcs. (on top)
Temp. controller	PID control by microprocessor
Temp. setting method	Digital setting by ▲▼ key
Temp. display method	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function	Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional function	Calibration off-set, Power failure compensation function, Key lock function
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal dimensions W×D×H	450x410x400mm
External dimensions W×D×H	550x540x730mm
Internal capacity	74L
Shelf plate with standard load	15kg/piece
Shelf rest step number / pitch	9 steps / 35mm
Power source 50/60Hz	AC115V 14A (with plug)
Weight	~38kg

Manufacturer's List Price: $2,090.00

Our Price: $1,925.00

Money Saved: $165.00

Yamato DX-602C Natural Convection Oven 153L, 115V

Circulation method	Natural convection
Operating temperature range	Room temp. +5°C to 280°C
Temperature control accuracy	±1°C (at 300°C)
Temperature distribution accuracy	±10°C (at 280°C)
Maximum temperature reaching time	~80 min (Room temp. to 280°C)
Interior material	Stainless steel
Exterior material	Electro-galvanized steel sheet with melamine resin baking finish
Heat insulating material	Glass wool
Heater	Iron-chrome wire heater 1.36 kW
Exhaust port	33 mm I.D. x 2 pcs. (on top)
Temp. controller	PID control by microprocessor
Temp. setting method	Digital setting by ▲▼ key
Temp. display method	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function	Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional function	Calibration off-set, Power failure compensation function, Key lock function
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal dimensions W×D×H	600x510x500mm
External dimensions W×D×H	700x640x830mm
Internal capacity	153L
Shelf plate with standard load	15kg/piece
Shelf rest step number / pitch	12 steps / 35mm
Power source 50/60Hz	AC115V 14A (with plug)
Weight	~56kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,780.00

Our Price: $2,343.00

Money Saved: $437.00

Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V

Circulation method	Natural convection
Operating temp. range	Room temp.+5 to 260°C
Temp. control accuracy	±1.0°C (at 260°C)
Temp. distribution accuracy	±5.0°C (at 260°C)
Max. temp. reaching time	~90 min. (Room temp. +5°C to 260°C)
Interior material	Stainless steel
Exterior material	Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	Stainless pipe heater / 1.2kW
Observation window	250×280 mm Chemically strengthened glass x 3
Cable hole	30 mm l.D.×1 pcs. (right side)
Exhaust port	30 mm l.D.×2 pcs. (on top)
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Operation menu key and Digital setting by ▲/▼ key
Temp. display method	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation: 6 pattern, 30 steps (30 steps×1, 15 steps×2, 10 steps×3)
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory, Pattern repeat function
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Memory abnormal, Automatic overheating prevention), Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions (W×D×Hmm)	450×490×450
External dimensions (W×D×Hmm)	560×601×820
Internal capacity	99L
Shelf plate load	~15kg / pcs.
Shelf rest step number / pitch	9 steps / 30mm
Power source 50/60Hz	AC115V 12A (with plug)
Weight	~48kg

Manufacturer's List Price: $2,570.00

Our Price: $2,416.00

Money Saved: $154.00

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V

Circulation method	Forced air circulation
Operating temp. range	Room temp. +10°C~260°C
Temp. adjustment accuracy	±1°C (at 210°C)
Temp. distribution accuracy	±2.5°C (at 210°C)
Max. temp. reaching time	~90 min.
Interior/Exterior material	Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	SUS pipe heater/0.8kW
Fan Type / Fan Motor	Scirocco fan, Condenser type motor 10W
Cable hole	30mm I.D. (on the right side) 1pc.
Exhaust port	30mm I.D. x 2 (on top)
Observation window	180×180mm Chemical strengthening glassx3
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. display	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions W×D×H	300×300×300 mm
External dimensions W×D×H	410×451×670 mm
Internal capacity	27L
Shelf plate with standard load	~15kg/piece
Shelf rest step number / Shelf rest pitch	9 steps / 30mm
Power source 50/60Hz	115V 7.5A (with plug)
Weight	~35kg

Manufacturer's List Price: $2,715.00

Our Price: $2,532.00

Money Saved: $183.00

Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V

System	Natural convection
Operating Temp. Range	RT+5~70°C
Interior Material	Stainless steel
Temp. Setting Method	Digital setting by ▲/▼ keys
Heater	SUS pipe heater 1.0kW
Temp. Controller	PID control with microprocessor
Operation Functions	Fixed temperature, auto stop, auto start, quick auto stop
Sensor	Temp. controller: K thermocouple, Overheat protection: Liquid-expansion temp. controller
Exhaust Port	I.D. 34mm × 2
Suction Port	I.D. 30mm × 2
Germicidal Lamp	--
Internal Dimensions WxDxH	450×450×450 mm
External Dimensions WxDxH	504×562×788 mm
Internal Capacity	92L
Weight	~45kg
Door	Single door, silicon rubber packing
Observation Window	Standard glass 3mm W250 x H300mm
Shelf Plate Load	15kg/pc.
Shelf Rest / Pitch	10 steps / 30mm
Power Source	AC115V (with plug)

Manufacturer's List Price: $2,740.00

Our Price: $2,576.00

Money Saved: $164.00

Yamato FO-200CR Muffle Furnace with Communication Port 3.75L, 115V

Operating temp. range	100°C to 1150°C
Temp. control accuracy	±2°C (at 1150 ° C)
Max. temp. reaching time	~60min.
Exterior material	Cold rolled steel plate with baked-on melamine resin finish
Internal material	Ceramic fiber
Sensor	R-thermocouple
Heater	Iron-chrome wire - 1.5kW
Exhaust port	ø20mm (top)
Cooling Fan Type	Axial fan motor
Temp. controller	PID control by microprocessor
Temp. setting/display method	Digital setting by▲/▼ keys / Digital display
Operation function	Fixed temperature, quick auto stop, auto stop, auto start, program (maximum 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns)
Additional functions	Calibration off-set, power failure compensation, key lock
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs.
Safety Device	Self diagnostic (memory error, heater disconnection, sensor error, SSR short curcuit), Electric leakage breaker, Overheat prevention device
Internal dimensions WxDxH	100×250×150 mm
External dimensions WxDxH	346×505×567 mm
Internal capacity	3.75L
Power source (50/60Hz)	AC115V 14.5A no plug, round terminal
Weight	~30kg

Manufacturer's List Price: $3,110.00

Our Price: $2,633.00

Money Saved: $477.00

Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V

Circulation method	Forced air circulation
Operating temp. range	Room temp. +10°C~260°C
Temp. adjustment accuracy	±1°C (at 210°C)
Temp. distribution accuracy	±2.5°C (at 210°C)
Max. temp. reaching time	~90 min.
Interior/Exterior material	Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	SUS pipe heater/1.2kW
Fan Type / Fan Motor	Scirocco fan, Condenser type motor 10W
Cable hole	30mm I.D. (on the right side) 1pc.
Exhaust port	30mm I.D. x 2 (on top)
Observation window	250 x 280mm Chemical strengthening glassx3
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. display	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions W×D×H	450×450×450 mm
External dimensions W×D×H	560×601×820 mm
Internal capacity	90L
Shelf plate with standard load	~15kg/piece
Shelf rest step number / Shelf rest pitch	11 steps / 30mm
Power source 50/60Hz	115V 11A (with plug)
Weight	~50KG

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $2,850.00

Our Price: $2,639.00

Money Saved: $211.00

Boekel Scientific 136400 Shake 'N' Bake - Rocking Hybridization Oven, 115V

Temperature Range:	Ambient +5°C to 70°C
Stability:	Chamber: ± 0.1ºC at 65ºC
Rocking Speed:	8 to 25 strokes/min
Max Shelf Load:	1kg (2.2lbs)
Tilt Angle:	5.5º to 11º
Product Dimensions:	Exterior: 32cm (121⁄2") 37cm (141⁄2") 41cm (16") Interior: 29cm (111⁄2") 29cm (111⁄2") 27cm (101⁄2") Tray: 22cm (81⁄2") 20cm (8") 1.3cm (1⁄2")
Shipping Weight:	12.6kg (28lbs.)
Electrical:	136400 - 115 VAC (60Hz)
*230V units are supplied with continental European plug.

Manufacturer's List Price: $3,307.44

Our Price: $2,740.56

Money Saved: $566.88

Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V

Circulation method	Forced air circulation
Operating temp. range	Room temp. +10°C~260°C
Temp. adjustment accuracy	±1°C (at 210°C)
Temp. distribution accuracy	±2.5°C (at 210°C)
Max. temp. reaching time	~90 min.
Interior/Exterior material	Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	SUS pipe heater/1.5kW
Fan Type / Fan Motor	Scirocco fan, Condenser type motor 10W
Cable hole	30mm I.D. (on the right side) 1pc.
Exhaust port	30mm I.D. x 2 (on top)
Observation window	250 x 280mm Chemical strengthening glassx3
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. display	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions W×D×H	600×500×500 mm
External dimensions W×D×H	710×651×870 mm
Internal capacity	150L
Shelf plate with standard load	~15kg/piece
Shelf rest step number / Shelf rest pitch	13 steps / 30mm
Power source 50/60Hz	115V 12.5A (with plug)
Weight	~65kg

Manufacturer's List Price: $3,390.00

Our Price: $2,947.00

Money Saved: $443.00

Yamato DVS-602C Programmable Natural Convection Oven 162L, 115V

Circulation method	Natural convection
Operating temp. range	Room temp.+5 to 260°C
Temp. control accuracy	±1.0°C (at 260°C)
Temp. distribution accuracy	±5.0°C (at 260°C)
Max. temp. reaching time	~90 min. (Room temp. +5°C to 260°C)
Interior material	Stainless steel
Exterior material	Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	Stainless pipe heater / 1.36kW
Observation window	250×280 mm Chemically strengthened glass x 3
Cable hole	30 mm l.D.×1 pcs. (right side)
Exhaust port	30 mm l.D.×2 pcs. (on top)
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Operation menu key and Digital setting by ▲/▼ key
Temp. display method	Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function	Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program mode	Program operation: 6 pattern, 30 steps (30 steps×1, 15 steps×2, 10 steps×3)
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory, Pattern repeat function
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Memory abnormal, Automatic overheating prevention), Overheat prevention, Electric leakage breaker with over current protection
Internal dimensions (W×D×Hmm)	600×540×500
External dimensions (W×D×Hmm)	710×651×870
Internal capacity	162L
Shelf plate load	~15kg / pcs.
Shelf rest step number / pitch	13 steps / 30mm
Power source 50/60Hz	AC115V 13.5A (with plug)
Weight	~63kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $3,230.00

Our Price: $3,036.00

Money Saved: $194.00

Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V

Operating temp. range	100°C to 1150°C
Temp. control accuracy	±2°C (at 1150 ° C)
Max. temp. reaching time	~70min.
Exterior material	Cold rolled steel plate with baked-on melamine resin finish
Internal material	Ceramic fiber
Sensor	R-thermocouple
Heater	Iron-chrome wire - 2.2 kW
Exhaust port	ø20mm (top)
Cooling Fan Type	Axial fan motor
Temp. controller	PID control by microprocessor
Temp. setting/display method	Digital setting by▲/▼ keys / Digital display
Operation function	Fixed temperature, quick auto stop, auto stop, auto start, program (maximum 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns)
Additional functions	Calibration off-set, power failure compensation, key lock
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs.
Safety Device	Self diagnostic (memory error, heater disconnection, sensor error, SSR short curcuit), Electric leakage breaker, Overheat prevention device
Internal dimensions WxDxH	200×300×150 mm
External dimensions WxDxH	446×554×567 mm
Internal capacity	9L
Power source (50/60Hz)	AC220V 10.5A single phase no plug, round terminal
Weight	~38kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $3,685.00

Our Price: $3,124.00

Money Saved: $561.00

Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V

System	Natural convection
Operating Temp. Range	RT+5~70°C
Interior Material	Stainless steel
Temp. Setting Method	Digital setting by ▲/▼ keys
Heater	SUS pipe heater 1.0kW
Temp. Controller	PID control with microprocessor
Operation Functions	Fixed temperature, auto stop, auto start, quick auto stop
Sensor	Temp. controller: K thermocouple, Overheat protection: Liquid-expansion temp. controller
Exhaust Port	Axial flow fan forced exhaust
Suction Port	Set air suction filter
Germicidal Lamp	15W×1
Internal Dimensions WxDxH	450×450×450 mm
External Dimensions WxDxH	504×562×820 mm
Internal Capacity	92L
Weight	~48kg
Door	Single door, silicon rubber packing
Observation Window	Standard glass 3mm W250 x H300mm
Shelf Plate Load	15kg/pc.
Shelf Rest / Pitch	10 steps / 30mm
Power Source	AC115V (with plug)

Manufacturer's List Price: $3,620.00

Our Price: $3,243.00

Money Saved: $377.00

IKA Oven 125 Basic Drying Oven

Heat output	1500 W
Working temperature	room temp. +5 - 250 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	7 segment LED
Time setting range	1 - 144000 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	74 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1550 W
Power input standby	1 W

Manufacturer's List Price: $3,577.00

Our Price: $3,398.15

Money Saved: $178.85

IKA Oven 125 Basic Drying Oven w/ Glass Door

Heat output	1500 W
Working temperature	room temp. +5 - 250 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	7 segment LED
Time setting range	1 - 144000 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	81 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1550 W
Power input standby	2 W

Manufacturer's List Price: $4,013.00

Our Price: $3,812.35

Money Saved: $200.65

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V

Circulation method	Forced air circulation
External temp. range	5~35°C
Operating temp. range	RT+20°C to 210°C
Temp. control accuracy*¹	±0.5°C (at 210°C)
Temp. distribution accuracy*¹	±2.0°C (at 210°C)
Temp. gradient*¹	6°C (at 210°C)
Temp. rise time*¹	~60 min.
Chamber / Exterior / Insulation	Stainless steel / Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater / insulating material	1.1 kW Stainless pipe heater / Glass wool
Fan Type	Scirocco fan, Capacitor motor
Fan Motor	10W
Cable hole (right side)	33mm I.D. 1pc.
Exhaust port	33mm I.D. 2pcs. (top)
Observation window	Optional
Temp. controller	PID Z control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. / Info display	Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution)
Timer	1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation
Operation function	Fixed temperature, Program operation (max.99 steps, up to 99 patterns repeat operationing function), Duration/time select timer operation function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start)
Additional functions	Power on and Integration time function (up to 65,535 hours), Calibration offset, Time display, Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information
Heater circuit control	Triac zero-cross control
Sensor	K-thermocouple double sensor (for temperature control and independent overheat prevention device)
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Independent overheat prevention	Set temperature range: 0~250°C
Internal dimensions*² W×D×H	450×450×450 mm
External dimensions*² W×D×H	580×646×860 mm
Internal capacity	90L
Shelf plate with standard load	~15kg/pcs.
Shelf rest step number / Shelf rest pitch	11 steps / 30mm
Power source 50/60Hz	AC115V 10A (with plug)
Weight	~63kg

Manufacturer's List Price: $5,030.00

Our Price: $4,448.00

Money Saved: $582.00

Yamato FO-610CR Muffle Furnace with Communication Port 17.5L, 220V

Operating temp. range	100°C to 1150°C
Temp. control accuracy	±2°C (at 1150 ° C)
Max. temp. reaching time	~80min.
Exterior material	Cold rolled steel plate with baked-on melamine resin finish
Internal material	Ceramic fiber
Sensor	R-thermocouple
Heater	Iron-chrome wire - 3kW
Exhaust port	ø20mm (top)
Cooling Fan Type	Axial fan motor
Temp. controller	PID control by microprocessor
Temp. setting/display method	Digital setting by▲▼ keys / Digital display
Operation function	Fixed temperature, quick auto stop, auto stop, auto start, program (maximum 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns)
Additional function	Calibration off-set, power failure compensation, key lock
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs.
Safety Device	Self diagnostic (memory error, heater disconnection, sensor error, SSR short curcuit), Electric leakage breaker, Overheat prevention device
Internal dimensions WxDxH	250×350×200 mm
External dimensions WxDxH	507×604×677 mm
Internal capacity	17.5L
Power source (50/60Hz)	AC220V single phase 15A no plug, round terminal
Weight	~52kg

Manufacturer's List Price: $5,235.00

Our Price: $4,621.00

Money Saved: $614.00

Yamato DNF-301-115V Programmable Energy Saving Forced / Natural Convection Oven 27L, 115V

Circulation method	Forced convection + Natural convection
External temp. range	5~35°C
Temperature set range	0~130°C (Wind velocity: 0), 0~270°C (Wind velocity: 1~10)
Temperature control range	RT +25~120°C (Wind velocity: 0), RT +15~260°C (Wind velocity: 1~10)
Temp. control accuracy *¹	Forced convection: ±0.3°C (at 260°C) Natural convection: ±0.5°C (at 120°C)
Temp. fluctuation *¹	Forced convection: ±0.5°C (at 260°C) Natural convection: ±1.0°C (at 120°C)
Temp. distribution precision *¹	Forced convection: ±2.5°C (at 260°C) Natural convection: ±5°C (at 120°C)
Temp. gradient *¹	Forced convection: 5°C (at 260°C) Natural convection: 15°C (at 120°C)
Temp. rise time *¹	Forced convection: ~70min. Natural convection:~20min.
Chamber / Exterior / Insulation	Stainless steel / Cold rolled steel paneling, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater (stainless steel tube)	0.8kW
Wind velocity adjusting system	10 steps (600~1500rpm) + Wind velocity (0)
Damper	Circulation-Ventilation Manual switching: Interlocked intake and exhaust system (Complete exhaust applicable / Unable to reach 260°C with damper fully open)
Cable port	Inner diameter: 33mm×1 (right side)
Exhaust port	Outer diameter: 50mm×1 (back side)
Inlet port	Inner diameter: 33mm×1 (right side)
Controller	Model V type
Temperature control / setting system	PID Z control / Digital setting with ▲/▼ keys
Temperature display system	Temperature reading display: green 4-digit digital LED/Temperature setting display: orange 5-digit digital LED
Other indications	LED indicates temperature patterns for heating/stabilizing/cooling
Operating function	Fixed temperature operation, Program operation (maximum 99 steps or 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start)
Additional functions	Variable Air Flow Function, Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO 2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery
Temperature sensor	K type Thermocouple double sensor (for temperature control and independent overheat prevention device)
Heater control	Triac with Zero-cross Control
Control board	Self-diagnostic Functions (Detection for Temp. Sensor Failure, TRIAC Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Door switch	Door open: fan motor and heater circuit OFF, Door close: fan motor and heater circuit ON
Internal dimensions (W×D×H mm)*²	300×300×300
External dimensions (W×D×H mm)*²	430×495×740
Capacity	27L
Weight	~50kg
Number of shelf bracket step / pitch	6steps/30mm
Withstand load of shelf	15kg/shelf
Power supply V±10% 50/60Hz Single phase	AC115V, 7.5A (with plug) with external transformer

Manufacturer's List Price: $5,315.00

Our Price: $4,996.00

Money Saved: $319.00

Yamato FO-710CR Muffle Furnace with Communication Port 23.6L, 220V

Operating temp. range	100°C to 1150°C
Temp. control accuracy	±2°C (at 1150 ° C)
Max. temp. reaching time	~80min.
Exterior material	Cold rolled steel plate with baked-on melamine resin finish
Internal material	Ceramic fiber
Sensor	R-thermocouple
Heater	Iron-chrome wire - 3.5kW
Exhaust port	ø20mm (top)
Cooling Fan Type	Axial fan motor
Temp. controller	PID control by microprocessor
Temp. setting/display method	Digital setting by▲▼ keys / Digital display
Operation function	Fixed temperature, quick auto stop, auto stop, auto start, program (maximum 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns)
Additional function	Calibration off-set, power failure compensation, key lock
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs.
Safety Device	Self diagnostic (memory error, heater disconnection, sensor error, SSR short curcuit), Electric leakage breaker, Overheat prevention device
Internal dimensions WxDxH	270×350×250 mm
External dimensions WxDxH	507×605×727 mm
Internal capacity	23.6L
Power source (50/60Hz)	AC220V single phase 18A no plug, round terminal
Weight	~58kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $5,775.00

Our Price: $5,029.00

Money Saved: $746.00

Yamato DG-800C Natural Convection Glassware Drying Oven 445L, 115V

System	Natural convection
Operating Temp. Range	RT+5~70°C
Interior Material	Stainless steel
Temp. Setting Method	Digital setting by ▲/▼ keys
Heater	SUS pipe heater 1.34kW
Temp. Controller	PID control with microprocessor
Operation Functions	Fixed temperature, auto stop, auto start, quick auto stop
Sensor	Temp. controller: K thermocouple, Overheat protection: Liquid-expansion temp. controller
Exhaust Port	I.D. 34mm × 2
Suction Port	I.D. 30mm × 2
Germicidal Lamp	-
Internal Dimensions WxDxH	620×600×1195 mm
External Dimensions WxDxH	674×711×1586 mm
Internal Capacity	445L
Weight	~78kg
Door	Single door, silicon rubber packing
Observation Window	Standard glass 3mm W250 x H700mm
Shelf Plate Load	15kg/pc.
Shelf Rest / Pitch	29 steps / 30mm
Power Source	AC115V (with plug)

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $5,415.00

Our Price: $5,090.00

Money Saved: $325.00

Yamato DNF-401 Programmable Energy Saving Forced / Natural Convection Oven 90L, 115V

Circulation method	Forced convection + Natural convection
External temp. range	5~35°C
Temperature set range	0~130°C (Wind velocity: 0), 0~270°C (Wind velocity: 1~10)
Temperature control range	RT +25~120°C (Wind velocity: 0), RT +15~260°C (Wind velocity: 1~10)
Temp. control accuracy *¹	Forced convection: ±0.3°C (at 260°C) Natural convection: ±0.3°C (at 120°C)
Temp. fluctuation *¹	Forced convection: ±0.5°C (at 260°C) Natural convection: ±0.8°C (at 120°C)
Temp. distribution precision *¹	Forced convection: ±2.5°C (at 260°C) Natural convection: ±3°C (at 120°C)
Temp. gradient *¹	Forced convection: 7°C (at 260°C) Natural convection: 13°C (at 120°C)
Temp. rise time *¹	Forced convection: ~105min. Natural convection:~25min.
Chamber / Exterior / Insulation	Stainless steel / Cold rolled steel paneling, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater (stainless steel tube)	0.6kWx2
Wind velocity adjusting system	10 steps (600~1500rpm) + Wind velocity (0)
Damper	Circulation-Ventilation Manual switching: Interlocked intake and exhaust system (Complete exhaust applicable / Unable to reach 260°C with damper fully open)
Cable port	Inner diameter: 33mm×1 (right side)
Exhaust port	Outer diameter: 50mm×1 (back side)
Inlet port	Inner diameter: 33mm×1 (right side)
Controller	Model V type
Temperature control / setting system	PID Z control / Digital setting with ▲/▼ keys
Temperature display system	Temperature reading display: green 4-digit digital LED/Temperature setting display: orange 5-digit digital LED
Other indications	LED indicates temperature patterns for heating/stabilizing/cooling
Operating function	Fixed temperature operation, Program operation (maximum 99 steps or 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start)
Additional functions	Variable Air Flow Function, Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO 2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery
Temperature sensor	K type Thermocouple double sensor (for temperature control and independent overheat prevention device)
Heater control	Triac with Zero-cross Control
Control board	Self-diagnostic Functions (Detection for Temp. Sensor Failure, TRIAC Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Door switch	Door open: fan motor and heater circuit OFF, Door close: fan motor and heater circuit ON
Internal dimensions (W×D×H mm)*²	450×450×450
External dimensions (W×D×H mm)*²	580×645×890
Capacity	90L
Weight	~75kg
Number of shelf bracket step / pitch	11 steps/30mm
Withstand load of shelf	15kg/shelf
Power supply V±10% 50/60Hz Single phase	AC115V 11A (with plug)

Manufacturer's List Price: $6,100.00

Our Price: $5,174.00

Money Saved: $926.00

IKA Oven 125 Control Drying Oven

Heat output	1500 W
Working temperature	room temp. +5 - 300 °C
Adjustable safety circuit	50 - 320 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	LCD
Time setting range	1 - 142560 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	82 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
RS 232 interface	yes
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1600 W
Power input standby	2 W

Manufacturer's List Price: $5,528.00

Our Price: $5,221.60

Money Saved: $306.40

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V

Circulation method	Forced air circulation
External temp. range	5~35°C
Operating temp. range	RT+20°C to 210°C
Temp. control accuracy*¹	±0.5°C (at 210°C)
Temp. distribution accuracy*¹	±2.0°C (at 210°C)
Temp. gradient*¹	8°C (at 210°C)
Temp. rise time*¹	~70 min.
Chamber / Exterior / Insulation	Stainless steel / Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater / insulating material	1.2 kW Stainless pipe heater / Glass wool
Fan Type	Scirocco fan, Capacitor motor
Fan Motor	10W
Cable hole (right side)	33mm I.D. 1pc.
Exhaust port	33mm I.D. 2pcs. (top)
Observation window	Optional
Temp. controller	PID Z control by microprocessor
Temp. setting method	Digital setting by ▲/▼ key
Temp. / Info display	Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution)
Timer	1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation
Operation function	Fixed temperature, Program operation (max.99 steps, up to 99 patterns repeat operationing function), Duration/time select timer operation function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start)
Additional functions	Power on and Integration time function (up to 65,535 hours), Calibration offset, Time display, Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information
Heater circuit control	Triac zero-cross control
Sensor	K-thermocouple double sensor (for temperature control and independent overheat prevention device)
Safety device	Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Independent overheat prevention	Set temperature range: 0~250°C
Internal dimensions*² W×D×H	600×500×500 mm
External dimensions*² W×D×H	730×696×910 mm
Internal capacity	150L
Shelf plate with standard load	~15kg/pcs.
Shelf rest step number / Shelf rest pitch	13 steps / 30mm
Power source 50/60Hz	AC115V 11A (with plug)
Weight	~77kg

Manufacturer's List Price: $5,640.00

Our Price: $5,302.00

Money Saved: $338.00

IKA Oven 125 Control Drying Oven w/ Glass Door

Heat output	1500 W
Working temperature	room temp. +5 - 300 °C
Adjustable safety circuit	50 - 270 °C
Adjustment and display resolution	0.1 K
Temperature stability (150°C, center, standard door)	0.5 ±K
Temperature display	yes
Timer	yes
Timer display	LCD
Time setting range	1 - 142560 min
Number of trays max.	6
Load for one tray max.	30 kg
Operating area inner chamber	550 x 525 x 450 mm
Total volume inner chamber	125 l
Air outlet port diameter inside	48 mm
Dimensions (W x H x D)	700 x 825 x 650 mm
Weight	89 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
RS 232 interface	yes
USB interface	yes
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	1600 W
Power input standby	2 W

Manufacturer's List Price: $6,156.00

Our Price: $5,698.20

Money Saved: $457.80

Yamato DNF-601 Programmable Energy Saving Forced / Natural Convection Oven 150L, 115V

Circulation method	Forced convection + Natural convection
External temp. range	5~35°C
Temperature set range	0~130°C (Wind velocity: 0), 0~270°C (Wind velocity: 1~10)
Temperature control range	RT +25~120°C (Wind velocity: 0), RT +15~260°C (Wind velocity: 1~10)
Temp. control accuracy *¹	Forced convection: ±0.3°C (at 260°C) Natural convection: ±0.3°C (at 120°C)
Temp. fluctuation *¹	Forced convection: ±0.5°C (at 260°C) Natural convection: ±0.6°C (at 120°C)
Temp. distribution precision *¹	Forced convection: ±2.5°C (at 260°C) Natural convection: ±3°C (at 120°C)
Temp. gradient *¹	Forced convection: 8°C (at 260°C) Natural convection: 13°C (at 120°C)
Temp. rise time *¹	Forced convection: ~100min. Natural convection:~25min.
Chamber / Exterior / Insulation	Stainless steel / Cold rolled steel paneling, chemical-proof baked-on finish / Glass wool
Door	Single swing (left side)
Heater (stainless steel tube)	0.83kWx2
Wind velocity adjusting system	10 steps (600~1500rpm) + Wind velocity (0)
Damper	Circulation-Ventilation Manual switching: Interlocked intake and exhaust system (Complete exhaust applicable / Unable to reach 260°C with damper fully open)
Cable port	Inner diameter: 33mm×1 (right side)
Exhaust port	Outer diameter: 50mm×1 (back side)
Inlet port	Inner diameter: 33mm×1 (right side)
Controller	Model V type
Temperature control / setting system	PID Z control / Digital setting with ▲/▼ keys
Temperature display system	Temperature reading display: green 4-digit digital LED/Temperature setting display: orange 5-digit digital LED
Other indications	LED indicates temperature patterns for heating/stabilizing/cooling
Operating function	Fixed temperature operation, Program operation (maximum 99 steps or 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start)
Additional functions	Variable Air Flow Function, Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO 2 Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery
Temperature sensor	K type Thermocouple double sensor (for temperature control and independent overheat prevention device)
Heater control	Triac with Zero-cross Control
Control board	Self-diagnostic Functions (Detection for Temp. Sensor Failure, TRIAC Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device
Earth leakage breaker	Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Door switch	Door open: fan motor and heater circuit OFF, Door close: fan motor and heater circuit ON
Internal dimensions (W×D×H mm)*²	600×500×500
External dimensions (W×D×H mm)*²	730×695×940
Capacity	150L
Weight	~90kg
Number of shelf bracket step / pitch	13 steps/30mm
Withstand load of shelf	15kg/shelf
Power supply V±10% 50/60Hz Single phase	AC115V 15A (with plug)

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $6,830.00

Our Price: $5,798.00

Money Saved: $1,032.00

Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V

System	Natural convection
Temp. Control Range	300~700°C
Temp. Control Accuracy	±5°C (at 700°C)
Temp. Fluctuation	10°C (at 700°C)
Temp. Distribution Accuracy	±25°C (at 700°C)
Temp. Gradient	30°C (at 700°C)
Temp. Rise Time	~70 min. (Room temp. +5°C~700°C)
Temp. Fall Time	~150 min. (700°C to 300°C)
Interior Material	Stainless steel sheet metal
Exterior Material	Chromium-free electrogalvanized steel sheet, baked-on finish
Heat Insulating Material	Ceramic fiber rock wool
Heater Type / Capacity	Iron-chrome wire heater / 1.3kW
Temp. Controller	PID control by microcomputer
Temp. Setting Method	Digital setting by operation menu key and ▲/▼ keys
Temp. Display	Temp. reading display: Green 4 digit LED digital display / Temp. setting display: Red 4 digit LED digital display
Timer Function	0 to 99 hrs 59 mins. and 100 hrs. to 999 hrs 50min.
Timer Resolution	1 minute increments under 99 hours and 59 minutes, 10 minutes after 100 hours.
Wait Function	Timer wait function (ON/OFF setting)
Operation Modes	Fixed temperature, program, program auto start, auto start, quick auto stop, auto stop
Program Modes	6 patterns (PrG1: 30 steps, PrG2-3: 15 steps, PrG4-6: 10 steps) step weight function, repeat function, step hold function, step skip function
Additional Functions	Calibration offset, keypad lock, auto resume mode select
Sensor	K thermocouple (W sensor)
Safety Device	Self-diagnostic functions (automatic overheat prevention, temp. sensor failure, heater disconnection, SSR short circuit, main relay failure, memory error, internal comm. error, abnormal temp. reading), overcurrent ELB, overheat prevention device
Internal Dimension	250 x 250 x 220 mm (WxDxH)
External Dimension	520 x 443 x 612 mm (WxDxH) (protrusions excluded)
Internal Capacity	13.75L
Shelf Load Capacity	15 kg. / pc. Total load capacity 30 kg.
Shelf Rest Step Number	3 steps
Shelf Rest Pitch	33mm
Power Source (50/60Hz)	AC115V 11.5A (with plug)
Weight	~36kg

Manufacturer's List Price: $6,215.00

Our Price: $5,842.00

Money Saved: $373.00

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V

System	Natural / Forced convection
Operating Temp. Range	RT+5~70°C
Interior Material	Stainless steel
Temp. Setting Method	Digital setting by ▲/▼ keys
Heater	SUS pipe heater 1.34kW
Temp. Controller	PID control with microprocessor
Operation Functions	Fixed temperature, auto stop, auto start, quick auto stop
Sensor	Temp. controller: K thermocouple, Overheat protection: Liquid-expansion temp. controller
Exhaust Port	Axial flow fan forced exhaust
Suction Port	Set air suction filter
Germicidal Lamp	15W×1
Internal Dimensions WxDxH	620×600×1195 mm
External Dimensions WxDxH	674×711×1618 mm
Internal Capacity	445L
Weight	~83kg
Door	Single door, silicon rubber packing
Observation Window	Standard glass 3mm W250 x H700mm
Shelf Plate Load	15kg/pc.
Shelf Rest / Pitch	29 steps / 30mm
Power Source	AC115V (with plug)

Manufacturer's List Price: $6,330.00

Our Price: $5,950.00

Money Saved: $380.00

Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V

Operating temp. range	100~1150°C
Temp. control accuracy	±1.0°C (at 1150°C)
Temp. fluctuation	±1.0°C (at 1150°C)
Temp. distribution accuracy	±4.0°C (at 1150°C)
Temp. gradient	14°C (at 1150°C)
Max. temp. reaching time	~90 min.
Exterior material	Cold rolled steel plate with baked-on melamine resin finish
Interior material	Alumina fiber
Sensor	R-thermocouple
Heater	Iron-chrome wire - 1.1kW
Exhaust port	ø20mm (top)
Cooling fan	19/16W (50/60Hz)
Temp. controller	PID control by microprocessor
Temp. and timer setting	Digital setting by ▲/▼ keys
Temp. display	Setting temperature: Orange 5-digit LED digital display (resolution: 1°C) Temperature display: Green 4-digit LED digital display (resolution: 1°C)
Timer	1 min. to 99 Hrs. 59 min., timer resolution 1 min. or 1 hr.
Operation function	Fixed temperature, Quick auto stop, Auto start, Auto stop, Program (maximum 99 steps, 99 patterns, repeat operation)
Additional functions	Power on / operation time accumulation (up to 65535 hr.), calendar (timer 24 hr.), clock (24 hr. display), calibration off-set, display of power consumption, CO₂ emissions and heater operation, power failure recovery options, user setting storage and recall
Heater circuit control	Triac with zero cross control
Safety device	Self diagnostic functions (sensor error , heater disconnection, triac short circuit, main relay failure disconnection, automatic overheat prevention), Key lock function, Independent overheat prevention, Electric leakage breaker
Internal dimensions WxDxH	100 x 150 x 100 mm
External dimensions WxDxH	376 x 404 x 515 mm
Internal capacity	1.5L
Power source (50/60Hz)	AC115V 10A (with plug)
Weight	~29kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $7,395.00

Our Price: $6,451.00

Money Saved: $944.00

Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V

Operating temp. range	100°C to 1150°C
Temp. control accuracy	±1.0°C (at 1150°C)
Temp. fluctuation	±1.0°C (at 1150°C)
Temp. distribution accuracy	±4.0°C (at 1150°C)
Temp. gradient	14°C (at 1150°C)
Max. temp. reaching time	~90 min.
Exterior material	Cold rolled steel plate with baked-on melamine resin finish
Interior material	Alumina fiber
Sensor	R-thermocouple
Heater	Iron-chrome wire - 2.4kW
Exhaust port	ø20mm (top)
Cooling fan	19/16W (50/60Hz)
Temp. controller	PID control by microprocessor
Temp. and timer setting	Digital setting by ▲/▼ keys
Temp. display	Setting temperature: Orange 5-digit LED digital display (resolution: 1°C) Temperature display: Green 4-digit LED digital display (resolution: 1°C)
Timer	1 min. to 99 Hrs. 59 min., timer resolution 1 min. or 1 hr.
Operation function	Fixed temperature, Quick auto stop, Auto start, Auto stop, Program (maximum 99 steps, 99 patterns, repeat operation)
Additional functions	Power on / operation time accumulation (up to 65535 hr.), calendar (timer 24 hr.), clock (24 hr. display), calibration off-set, display of power consumption, CO₂ emissions and heater operation, power failure recovery options, user setting storage and recall
Heater circuit control	Triac with zero cross control
Safety device	Self diagnostic functions (sensor error , heater disconnection, triac short circuit, main relay failure disconnection, automatic overheat prevention), Key lock function, Independent overheat prevention, Electric leakage breaker
Internal dimensions WxDxH	200 x 250 x 150 mm
External dimensions WxDxH	446 x 504 x 565 mm
Internal capacity	7.5L
Power source (50/60Hz)	AC115V 21.5A (no plug, round terminal)
Weight	~43kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $7,480.00

Our Price: $6,831.00

Money Saved: $649.00

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V

Operating temp. range	100°C to 1150°C
Temp. control accuracy	±1.0°C (at 1150°C)
Temp. fluctuation	±1.0°C (at 1150°C)
Temp. distribution accuracy	±4.0°C (at 1150°C)
Temp. gradient	14°C (at 1150°C)
Max. temp. reaching time	~80 min.
Exterior material	Cold rolled steel plate with baked-on melamine resin finish
Interior material	Alumina fiber
Sensor	R-thermocouple
Heater	Iron-chrome wire - 3.25kW
Cooling fan	19/16W (50/60Hz)
Temp. controller	PID control by microprocessor
Temp. and timer setting	Digital setting by ▲/▼ keys
Temp. display	Setting temperature: Orange 5-digit LED digital display (resolution: 1°C) Temperature display: Green 4-digit LED digital display (resolution: 1°C)
Timer	1 min. to 99 Hrs. 59 min., timer resolution 1 min. or 1 hr.
Operation function	Fixed temperature, Quick auto stop, Auto start, Auto stop, Program (maximum 99 steps, 99 patterns, repeat operation)
Additional functions	Power on / operation time accumulation (up to 65535 hr.), calendar (timer 24 hr.), clock (24 hr. display), calibration off-set, display of power consumption, CO₂ emissions and heater operation, power failure recovery options, user setting storage and recall
Heater circuit control	Triac with zero cross control
Safety device	Self diagnostic functions (sensor error , heater disconnection, triac short circuit, main relay failure disconnection, automatic overheat prevention), Key lock function, Independent overheat prevention, Electric leakage breaker
Internal dimensions WxDxH	300 x 250 x 150 mm
External dimensions WxDxH	506 x 504 x 625 mm
Internal capacity	11.3L
Power source (50/60Hz)	AC220V 18A (no plug, round terminal)
Weight	~51kg

Manufacturer's List Price: $7,790.00

Our Price: $7,323.00

Money Saved: $467.00

Company

My Account

Quick Links