New Peristaltic Pumps | Marshall Scientific

Voltage	90V to 132V for 110 voltage selection: 180V to 264V for 220 voltage selection
Weight	4 kg
Communication	Gilson Serial Input/Output Channel (GSIOC) - RS-422A interface
Connections	Contact closure: Two TTL-compatible inputs for control of start/stop and direction of flow,Voltage input: One 5V analog signal for variable control of motor speed
Dimensions	15 x 18 x 17.5 cm
Number of Channels	Selectable
Environment	0-40° C No warm-up time required
High Flow	No

Usually Ships in 24 Hours

Manufacturer's List Price: $4,536.05

Our Price: $2,295.05

Sale Price: $2,295.05

Money Saved: $2,241.00

Voltage	90V to 132V for 110 voltage selection: 180V to 264V for 220 voltage selection
Weight	4 kg
Communication	Gilson Serial Input/Output Channel (GSIOC) - RS-422A interface
Connections	Contact closure: Two TTL-compatible inputs for control of start/stop and direction of flow,Voltage input: One 5V analog signal for variable control of motor speed
Dimensions	15 x 18 x 17.5 cm
Number of Channels	Selectable
Environment	0-40° C No warm-up time required
High Flow	Yes

Usually Ships in 24 Hours

Manufacturer's List Price: $4,712.05

Our Price: $2,295.05

Money Saved: $2,417.00

Head Speed	0.01 to 48 RPM
Motor Speed Stability	0.5% for any variation, torque, or temperature
Flow Rate Range	Maximum: MP model 30 ml/min (1.8L/h, 4mm tubing), HF model 220ml/min (13.2L/h, 8mm tubing) Minimum: 0.3ul/min (0.25mm tubing)
Position	Upright only (vertical ± 5%)
Maximum Back Pressure	0.5 MPa (72.5 psi) for MP models, 0.3 MPa (43.5 psi) for HF models
Peristaltic Tubing Diameter	0.25 to 4mm (ID) for MP models, 2 to 8mm (ID) for HF models
Operating Temperature	4 to 40°C: No warm-up time is required before operation
Dimensions (W x D x H)	5.9 x 6.9 x 7.3 in. (15 x 17.4 18.5 cm)
Weight	5.5 lb. (2.5 kg)
Electrical Requirements	100-240V, 50/60Hz