151L | 5.4 cu ft - 180L

Yamato IC-603CW General Purpose Incubator with Window 159L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0.4kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	600 x 530 x 500 mm
External dimensions WxDxH	710 x 656 x 870 mm
Internal capacity	159L
Inner door	Reinforced glass door x 1
Shelf load capacity	~15 kg/pc.
Shelf rest step number	12 steps
Power supply (50/60 Hz)	AC115V 6A (with plug)
Weight	~65 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,780.00

Our Price: $1,673.00

Money Saved: $107.00

Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V

System	Natural convection
Operating temp. range	Room temp. +5~80°C
Temp. control accuracy	±0.5°C (at 37°C)
Temp. distribution accuracy	±1.0°C
Interior	Stainless steel
Exterior	Cold rolled steel plate with melamine resin baking finish
Heat insulator	Glass fiber
Heater	Iron-chrome wire heater, 0.4kW
Temperature controller	PID control by microprocessor
Temperature setting system	Operation menu key and digital setting by ▲▼ keys, digital display
Temperature display	Measurement temperature: Digital display by 4 digit green LED / Setting temperature: Digital display by 4 digit red LED
Timer	1 min. ~ 99 hrs 59 mins. and 100~999 hrs 50 mins (including timer waiting function)
Operation function	Fixed temperature, Auto start, Auto stop, Quick Auto stop
Additional function	Calibration off-set, Key-lock, Power outage compensation
Safety device	Self diagnostic functions, temp. sensor error, display error, measurement temp. error, auto overheat prevention
Heater control circuit	SSR drive system
Sensor	K-thermocouple
Internal dimensions WxDxH	600 x 530 x 500 mm
External dimensions WxDxH	710 x 656 x 870 mm
Internal capacity	159L
Inner door	Reinforced glass door x 1
Shelf load capacity	~15 kg/pc.
Shelf rest step number	12 steps
Power supply (50/60 Hz)	AC115V 6A (with plug)
Weight	~65 kg

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $1,880.00

Our Price: $1,767.00

Money Saved: $113.00

Memmert IN160 Natural Convection Incubator 161L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5 above ambient temperature to +80 °C
Volume	161 L (5.7 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door	Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	8
Max. Loading of Chamber	462 lbs
Max. Loading per Shelf	44 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	22 x 28.3 x 15.7 inches
Exterior Dimensions (WxHxD)	29.3 x 43.5 x 23 inches (d +2.2” door handle)
Net Weight	Approx. 106 lbs
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $3,836.00

Our Price: $3,836.00

Sale Price: $3,682.56

Money Saved: $153.44

Memmert IF160 Forced Circulation Incubator 161L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	161 L (5.7 cu.ft.)
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent	Vent connection with restrictor flap
Programming	AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation	Program stored in case of power failure
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	8
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	462 lbs
Interior Dimensions (WxHxD)	22 x 28.3 x 15.7 inches (56 x 72 x 40 cm)
Exterior Dimensions (WxHxD)	29.3 x 43.5 x 23 (d +2.2” door handle) (74.5 x 110.4 x 58.4 cm)
Net Weight	Approx. 212 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $4,525.00

Our Price: $4,525.00

Sale Price: $4,344.00

Money Saved: $181.00

Memmert IN160plus Natural Convection Incubator 161L, 115V

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	161 L (5.7 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	2 stainless steel grids, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	8
Max. Loading of Chamber	462 lbs (210 kg)
Max. Loading per Shelf	44 lbs (20 kg)
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	22 x 28.4 x 15.8 inches
Exterior Dimensions (WxHxD)	29.3 x 43.5 x 23 inches (d +2.2” door handle)
Net Weight	Approx. 243 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $4,973.00

Our Price: $4,973.00

Sale Price: $4,774.08

Money Saved: $198.92

Memmert IF160plus Forced Circulation Incubator 161L, 115V

Setting Temperature Range	+20 to +80°C
Working Temperature Range	Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)	0.1°C
Volume	161 L (5.7 cu.ft.)
Temperature Sensor	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel	ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program	Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT	The process time does not start until the set temperature is reached
Language Setting	German/English/Spanish/French
Calibration	Three freely selectable temperature values
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent	Vent connection with restrictor flap
Documentation	Program stored in case of power failure
Temperature Control	Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY	Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior	Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	8
Max. Loading Per Shelf	44 lbs
Max. Loading of Chamber	462 lbs
Interior Dimensions (WxHxD)	22" x 28.4" x 15.8" inches (56 x 72 x 40 cm)
Exterior Dimensions (WxHxD)	29.3" x 43.5" x 23" (74.5 x 110.4 x 58.4 cm)
Net Weight	Approx. 212 lbs
Electrical Data	115 V, 50/60 Hz, approx. 900 W

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $5,668.00

Our Price: $5,668.00

Sale Price: $5,441.28

Money Saved: $226.72

Benchmark SureTherm CO2 Incubator, 180L, 115V w/ Three Shelves

Benchmark H3565-180 SureTherm CO2 Incubator, 180L, 115V w/ Three Shelves

Temperature Range:	Ambient +5° to 60°C
Temperature Accuracy:	±0.1°C
Temperature Uniformity:	± 0.4°C*
Temperature Increments:	0.1°C
Temperature Stability:	0.1°C
CO₂ Range:	0 to 20%
CO₂ Increment:	0.1%
CO₂ Accuracy:	± 0.1%
CO₂ Sensor:	Dual Beam IR CO₂ Sensor
Heat Decontamination:	No
Chamber Dimensions: (W x D x H)	18.7 x 20.8 x 28 in. / 47.3 x 52.8 x 71 cm
Chamber Volume:	180 Liters
Split Inner Door:	No
Chamber Material	Stainless Steel
Exterior Dimensions: (W x D x H)	22 x 26.2 x 37.2 in. / 56 x 66.5 x 94.5 cm
Weight:	172lbs / 78kg
Electrical:	120V or 230V 50-60Hz
Power Consumption:	420W
Warranty:	2 Years

Usually Ships in 24 Hours

Manufacturer's List Price: $7,470.80

Our Price: $6,350.18

Money Saved: $1,120.62

Benchmark SureTherm CO2 Incubator, 180L with High heat Decontamination

Benchmark H3565-180HD SureTherm CO2 Incubator, 180L with High heat Decontamination

Temperature Range:	Ambient +5° to 60°C
Temperature Accuracy:	±0.1°C
Temperature Uniformity:	±0.4°C
Temperature Increments:	0.1°C
Temperature Stability:	0.1°C
CO₂ Range:	0 to 20%
CO₂ Increment:	0.1%
CO₂ Accuracy:	± 0.1%
CO₂ Sensor:	Dual Beam IR CO₂ Sensor
Heat Decontamination:	Yes
Chamber Dimensions: (W x D x H)	18.7 x 20.8 x 28 in. / 47.3 x 52.8 x 71 cm
Chamber Volume:	180 Liters
Split Inner Door:	No
Chamber Material	Stainless Steel
Exterior Dimensions: (W x D x H)	22 x 26.2 x 37.2 in. / 56 x 66.5 x 94.5 cm
Weight:	172lbs / 78kg
Electrical:	120V or 230V 50-60Hz
Power Consumption:	700W
Warranty:	2 Years

Usually Ships in 24 Hours

Manufacturer's List Price: $9,339.94

Our Price: $7,938.95

Money Saved: $1,400.99

Memmert ICO150 CO2 Incubator 156L, 115V

Temperature Range	Ambient +5°C to 50°C
Temperature Uniformity	± 0.3°C at 37°C
Volume	156L (5.5 cu. ft.)
CO2 Range	0 to 20%
Sterilization Program	60 minutes at 180°C (without removing the sensors)
Temperature Setting Resolution	0.1°C
Temperature Stability	± 0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Humidity Control (Standard)	Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %
CO2 Control	Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
CO2 Setting Accuracy	0.1%
CO2 Stability	± 0.2%
Control Technology	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT	The process time does not start until the set temperature is reached
Adjustable Parameters	Temperature (Celsius or Fahrenheit), CO2, Timer
Communication Interfaces	Ethernet LAN, USB
Documentation Program	Stored in case of power failure
Programming	AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
AutoSAFETY	Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic System	Integral fault diagnostics for temperature and CO2
Alarm	Visual and acoustic
Heating Concept	6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Shelving	2 perforated stainless steel shelves
Inner Glass Door	with opening (8 mm Ø) to take gas sample
Interior Material	1.4301 (ASTM 304), corrosion resistant
Max. Number of Shelves	10
Max. Loading of Chamber	264 lb. (119.7 kg)
Max. Loading per Shelf	33 lb. (15 kg)
Housing rear	Zinc-plated steel
Country of origin	Germany
Internal Dimensions (W x H x D)	22 x 27.6 x 15.7 in. (55.9 x 70.1 x 39.9 cm)
External Dimensions (W x H x D)	28.3 x 42.1 x 23.3 in. (71.8 x 106.9 x 59.2 cm)
Weight	199 lb. (90.3 kg)
Electrical Requirements	115 V (±10%), 50/60 Hz approx. 1500 W / 13.1 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $8,870.00

Our Price: $8,870.00

Sale Price: $8,515.20

Money Saved: $354.80

Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V

Temperature Range	Ambient +5°C to 50°C
Temperature Uniformity	± 0.3°C at 37°C
Volume	156L (5.5 cu. ft.)
CO2 Range	0 to 20%
Sterilization Program	60 minutes at 180°C (without removing the sensors)
Temperature Setting Resolution	0.1°C
Temperature Stability	± 0.1°C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Active Humidity Control	40 to 97% RH, or no RH
CO2 Control	Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
CO2 Setting Accuracy	0.1%
CO2 Stability	± 0.2%
Control Technology	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
Language Setting	German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT	The process time does not start until the set temperature is reached
Adjustable Parameters	Temperature (Celsius or Fahrenheit), CO2, Timer
Communication Interfaces	Ethernet LAN, USB
Documentation Program	Stored in case of power failure
Programming	AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
AutoSAFETY	Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic System	Integral fault diagnostics for temperature and CO2
Alarm	Visual and acoustic
Heating Concept	6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Shelving	2 perforated stainless steel shelves
Inner Glass Door	with opening (8 mm Ø) to take gas sample
Interior Material	1.4301 (ASTM 304), corrosion resistant
Max. Number of Shelves	10
Max. Loading of Chamber	264 lb. (119.7 kg)
Max. Loading per Shelf	33 lb. (15 kg)
Housing rear	Zinc-plated steel
Country of origin	Germany
Internal Dimensions (W x H x D)	22 x 27.6 x 15.7 in. (55.9 x 70.1 x 39.9 cm)
External Dimensions (W x H x D)	28.3 x 42.1 x 23.3 in. (71.8 x 106.9 x 59.2 cm)
Weight	199 lb. (90.3 kg)
Electrical Requirements	115 V (±10%), 50/60 Hz approx. 1500 W / 13.1 A

Usually Ships in 24 to 72 Hours

Manufacturer's List Price: $10,470.00

Our Price: $10,470.00

Sale Price: $10,051.20

Money Saved: $418.80

Benchmark SureTherm CO2 Incubator, 180L, 115V w/ High Heat Decontamination, Split Window Door and O2 Control

Benchmark H3565-180HDO2 SureTherm CO2 Incubator, 180L, 115V w/ High Heat Decontamination, Split Window Door and O2 Control

Temperature Range:	Ambient +5° to 60°C
Temperature Accuracy:	±0.1°C
Temperature Uniformity:	± 0.4°C*
Temperature Increments:	0.1°C
Temperature Stability:	0.1°C
CO₂ Range:	0 to 20%
CO₂ Increment:	0.1%
CO₂ Accuracy:	± 0.1%
CO₂ Sensor:	Dual Beam IR CO₂ Sensor
Heat Decontamination:	Yes
Chamber Dimensions: (W x D x H)	18.7 x 20.8 x 28 in. / 47.3 x 52.8 x 71 cm
Chamber Volume:	180 Liters
Split Inner Door:	No
Chamber Material	Stainless Steel
Exterior Dimensions: (W x D x H)	22 x 26.2 x 37.2 in. / 56 x 66.5 x 94.5 cm
Weight:	172lbs / 78kg
Electrical:	120V or 230V 50-60Hz
Power Consumption:	700W
Warranty:	2 Years

Usually Ships in 24 Hours

Manufacturer's List Price: $12,844.62

Our Price: $10,917.92

Money Saved: $1,926.70

Company

My Account

Quick Links