Free Air Displacement @ 115V, 60Hz
0.7 (20)
Maximum Vacuum, in. Hg
22"
Ultimate Pressure, Torr (mbar)
190 (253)
Tubing Needed, I.D., inches
1/4"
Weight, lbs (kg)
6.4 (2.9)
Motor H.P.
1/7
Motor Voltage, Frequency & Watts
115V, 60Hz, 1 Phase, 160W
Motor Amps
1.5
Overall Pump Dimensions L x W x H inches (cm)
6.8 x 7.3 x 8.3 (17.3 x 18.3 x 21.1)
Shipping Weight, pounds (kg)
8.6 (3.9)
Free Air Displacement @ 115V, 60Hz & 230V, 50Hz
CFM (L/min) @ 60Hz 1.3 (37)
CFM (L/min) @ 50Hz 1.1 (31)
24"
150 (200)
Maximum continuous Pressure, PSIG
1`8
10.2 (4.6)
43105
115V, 60Hz, 1 Phase, 160W / 230V, 50Hz
115V @ 3.5 /230V @ 1.75
8.75 x 5.0 x 8.75 (22.2 x 12.7 x 22.2)
Suction Capacity
85 m³/h
Ultimate vacuum
100 mbar
Power input
40 W
Weight
11 lb
Dimensions without condenser (w/d/h)
247 x 121 x 145 mm
Pump rate max. (50/60Hz)
1.7 m³/h
28.3 l/min
Final pressure without gas ballast
7 mbar
Final pressure with gas ballast
15 mbar
Suction levels
2
Cylinder
Connection diameter suction side
10 mm
Connection diameter pressure side
Gas ballast valve
yes
Input pressure
7 - 1050 mbar
Speed (50Hz)
1380 rpm
Speed (60Hz)
1680 rpm
Noise at low. pressure
65 dB(A)
Mode automatic
Mode manual
Mode pump %
Mode program
Dimensions (W x H x D)
245 x 155 x 320 mm
11.5 kg
Permissible ambient temperature
10 - 40 °C
Permissible relative humidity
80 %
Protection class according to DIN EN 60529
IP 54
Voltage
230 / 115 / 100 V
Frequency
50/60 Hz
180 W
1.32 m³/h
22 l/min
2 mbar
4
8 mm
2 - 1030 mbar
Two-point control
Analog speed vacuum control
Speed control
Turning knob
Speed range
285 - 1200 rpm
Display
LED
54 dB(A)
Material in contact with medium
Al2O3; PTFE; FFPM; PPS; NBR
Housing material
alu-cast coating / thermoplastic polymer
150 x 375 x 370 mm
5 - 40 °C
Permissible ambient conditions
80% (up to 31°C), decreasing linearly to max. 50 (@40°C)
IP 20
RS 232 interface
USB interface
100 - 240 V
130 W
Power input standby
3 W