Free Air Displacement @ 115V, 60Hz
0.7 (20)
Maximum Vacuum, in. Hg
22"
Ultimate Pressure, Torr (mbar)
190 (253)
Tubing Needed, I.D., inches
1/4"
Weight, lbs (kg)
6.4 (2.9)
Motor H.P.
1/7
Motor Voltage, Frequency & Watts
115V, 60Hz, 1 Phase, 160W
Motor Amps
1.5
Overall Pump Dimensions L x W x H inches (cm)
6.8 x 7.3 x 8.3 (17.3 x 18.3 x 21.1)
Shipping Weight, pounds (kg)
8.6 (3.9)
Free Air Displacement @ 115V, 60Hz & 230V, 50Hz
CFM (L/min) @ 60Hz 1.3 (37)
CFM (L/min) @ 50Hz 1.1 (31)
24"
150 (200)
Maximum continuous Pressure, PSIG
1`8
10.2 (4.6)
43105
115V, 60Hz, 1 Phase, 160W / 230V, 50Hz
115V @ 3.5 /230V @ 1.75
8.75 x 5.0 x 8.75 (22.2 x 12.7 x 22.2)
Suction Capacity
85 m³/h
Ultimate vacuum
100 mbar
Power input
40 W
Weight
11 lb
Dimensions without condenser (w/d/h)
247 x 121 x 145 mm
Displacement (swept volume) 50 Hz
0.9 m3h-1 / 0.5 ft3min-1
Displacement (swept volume) 60 Hz
1.1 m3h-1 / 0.6 ft3min-1
Speed (Pneurop 6602) 50 Hz
0.75 m3h-1 / 0.4 ft3min-1
Speed (Pneurop 6602) 60Hz
0.95 m3h-1 / 0.5 ft3min-1
Ultimate vacuum (total pressure)
without gas ballast
3.0 x 10-3 mbar / 2.3 x 10-3 Torr
with full gas ballast
2.0 x 10-1 mbar / 1.5 x 10-1 Torr
Inlet connection
NW10 flange
Outlet connection
Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
Maximum permitted pressure at outlet
0.5 bar gauge / 7 psig
Maximum inlet pressure for water vapour
15 mbar / 11 Torr
Maximum water vapour pumping rate
8 gh-1
Motor power
0.09 kW
Nominal rotational speed 50/60Hz
1400/1700 rpm
Power connector
IEC EN60320 C13
Operating temperature range
12 - 40 °C
Weight, without oil
10 kg / 22 lbs
Noise
43 dB(A) @ 50 Hz
Noise with acoustic enclosure
36 dB(A) @ 50 Hz
Oil capacity - maximum
0.28 litre
Oil capacity - minimum
0.2 litre
Recommended oil
Ultragrade 15
Electrical Requirements
100-120V, 50/60Hz (For 230V option please contact)
Displacement (swept volume)
50 Hz
1.8 m3h-1 / 1 ft3min-1
60 Hz
2.2 m3h-1 / 1.3 ft3min-1
Speed (Pneurop 6602)
1.6 m3h-1 / 0.8 ft3min-1
2.0 m3h-1 / 1.2 ft3min-1
3 x 10-3 mbar / 2.3 x 10-3 Torr
with gas ballast
2.5 x 10-2 mbar / 1.9 x 10-2 Torr
16 gh-1
Motor power 50/60 Hz (IP54)
0.16 kW
Nominal rotation speed 50/60Hz
2800/3400 rpm
54 dB (A) @ 50 Hz
47 dB(A) @ 50Hz
Oil capacity - max
min
Pump rate max. (50/60Hz)
1.7 m³/h
28.3 l/min
Final pressure without gas ballast
7 mbar
Final pressure with gas ballast
15 mbar
Suction levels
2
Cylinder
Connection diameter suction side
10 mm
Connection diameter pressure side
Gas ballast valve
yes
Input pressure
7 - 1050 mbar
Speed (50Hz)
1380 rpm
Speed (60Hz)
1680 rpm
Noise at low. pressure
65 dB(A)
Mode automatic
Mode manual
Mode pump %
Mode program
Dimensions (W x H x D)
245 x 155 x 320 mm
11.5 kg
Permissible ambient temperature
10 - 40 °C
Permissible relative humidity
80 %
Protection class according to DIN EN 60529
IP 54
Voltage
230 / 115 / 100 V
Frequency
50/60 Hz
180 W
200-230V, 50/60Hz
2.8 CFM (78 L/min) @ 60Hz
Ultimate Vacuum (Without Gas Ballast)
2x10^-3 mbar (1.5x10^-3 Torr)
Ultimate Vacuum (Without Gas Ballast Partial)
5x10^-4 mbar (4x10^-4 Torr)
Ultimate Vacuum (With Gas Ballast Total)
7x10^-2 mbar (5x10^-2 Torr)
Ambient Operating Temperature
10°C to 40°C
Motor Speed
1740 RPM @ 60Hz
Motor Power
0.4 kW @ 60Hz
1.32 m³/h
22 l/min
2 mbar
4
8 mm
2 - 1030 mbar
Two-point control
Analog speed vacuum control
Speed control
Turning knob
Speed range
285 - 1200 rpm
Display
LED
54 dB(A)
Material in contact with medium
Al2O3; PTFE; FFPM; PPS; NBR
Housing material
alu-cast coating / thermoplastic polymer
150 x 375 x 370 mm
5 - 40 °C
Permissible ambient conditions
80% (up to 31°C), decreasing linearly to max. 50 (@40°C)
IP 20
RS 232 interface
USB interface
100 - 240 V
130 W
Power input standby
3 W
Catalog Number
A65201906
Displacement
50Hz
3.7 m3h-1 / 2.2 ft 3min-1
60Hz
4.5 m3h-1 / 2.3 ft3min-1
3.3 m3h-1 / 3.0 ft 3min-1
2.3 m3h-1 / 3.7 ft 3min-1
Ultimate pressure
2.0 x 10-3 mbar / 1.5 x 10-3 Torr
Ultimate pressure GB I
3.0 x 10-2 mbar / 2.3 x 10-2 Torr
Ultimate pressure GB II
1.2 x 10-2 mbar / 9.1 x 10-2 Torr
Ultimate Pressure with Fomblin®
2.0 x 10-2 mbar / 1.5 x 10-2 Torr
Max inlet pressure for water vapour
50 mbar / 38 Torr
Max water vapour pumping rate – GB I
60 gh-1
Max water vapour pumping rate – GB II
220 gh-1
Max allowed outlet pressure
1 bar gauge / 14 psig
Max allowed inlet and gas ballast pressure
Motor power 50/60Hz
250 / 300W
Power connector 1-ph
1500 / 1800rpm
Weight (without oil)
21.6 kg / 47.3 lb
Oil capacity min/max
0.42/0.7 litres
Ultragrade 19
Inlet flange
NW25
Exhaust flange
Noise level
48 dB(A) @ 50 Hz
12 – 40 °C
Electrical Supply
1 Ph, 100-120/200-230 VAC 50/60 Hz
4.2 CFM (118 L/min) @ 60Hz
Inlet: for hose ID 8 - 9,5
Outlet: for hose ID 10