Home > Ovens
Need help selecting a product? Use our new filter tool to help you find the right product.
Sort By:
Page of 10
Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V

Internal Capacity 90L
Circulation Method Forced air circulation
Operating Temp. Range Room temp. +10°C to 260°C
Temp. Adjustment Accuracy ± 1°C (at 210°C)
Temp. Distribution Accuracy ± 2.5°C (at 210°C)
Max. Temp. Reaching Time ~90 min.
Interior/Exterior Material Stainless steel / Cold rolled steel plate with melamine resin baking finish
Shelf Plate With Standard Load ~15kg/piece
Shelf Rest Step Number / Shelf Rest Pitch 11 steps / 30mm
Heat Insulating Material Glass wool
Heater SUS pipe heater / 1.2kW
Fan Type / Fan Motor Scirocco fan, Condenser type motor 10W
Cable Hole 30mm I.D. (on the right side) 1pc.
Exhaust Port 30mm I.D. × 2 (on top)
Observation Window 9.8 × 11.0 in. (250 × 280mm) chemical strengthening glass × 3
Temp. Controller 3 patterns program controller, PID control by microprocessor
Temp. Setting Method Digital setting by ▲/▼ key
Temp. Display Measurement temp.: Digital display by green LED / Setting temp.: Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation Function Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program Mode Program operation: 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3), Pattern repeat function
Additional Functions Calibration off-set function, Key lock, Uninterruptible power for memory
Heater Circuit Control SSR control
Sensor K-thermocouple
Safety Device Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal Dimensions W×D×H 17.7 × 17.7 × 17.7 in. (45 × 45 × 45 cm)
External Dimensions W×D×H 22.0 × 23.7 × 32.3 in. (56 × 60.1 × 82 cm)
Weight 110.2 lb. (50kg)
Electrical Requirements 115V, 50/60Hz, 11A (with plug)

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $2,910.00
Our Price: $2,789.00
Sale Price: $2,655.00
Money Saved: $255.00
Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V

Internal Capacity 150L
Circulation Method Forced air circulation
Operating Temp. Range Room temp. +10°C to 260°C
Temp. Adjustment Accuracy ± 1°C (at 210°C)
Temp. Distribution Accuracy ± 2.5°C (at 210°C)
Max. Temp. Reaching Time ~90 min.
Interior/Exterior Material Stainless steel / Cold rolled steel plate with melamine resin baking finish
Shelf Plate With Standard Load ~15kg/piece
Shelf Rest Step Number / Shelf Rest Pitch 13 steps / 30mm
Heat Insulating Material Glass wool
Heater SUS pipe heater / 1.5kW
Fan Type / Fan Motor Scirocco fan, Condenser type motor 10W
Cable Hole 30mm I.D. (on the right side) 1pc.
Exhaust Port 30mm I.D. × 2 (on top)
Observation Window 9.8 × 11.0 in. (250 × 280mm) chemical strengthening glass × 3
Temp. Controller 3 patterns program controller, PID control by microprocessor
Temp. Setting Method Digital setting by ▲/▼ key
Temp. Display Measurement temp.: Digital display by green LED / Setting temp.: Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation Function Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program Mode Program operation: 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3), Pattern repeat function
Additional Functions Calibration off-set function, Key lock, Uninterruptible power for memory
Heater Circuit Control SSR control
Sensor K-thermocouple
Safety Device Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal Dimensions W×D×H 23.6 × 19.7 × 19.7 in. (60 × 50 × 50 cm)
External Dimensions W×D×H 28.0 × 25.6 × 34.3 in. (71 × 65.1 × 87 cm)
Weight 143.3 lb. (65kg)
Electrical Requirements 115V, 50/60Hz, 12.5A (with plug)

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $3,460.00
Our Price: $2,941.00
Money Saved: $519.00
Memmert UN30 Natural Convection Oven 32L, 115V Memmert UN30 Natural Convection Oven 32L, 115V

Set temperature range in °C Min. 5°C above ambient up to +300°C
Volume 32L
Convection Natural Convection
ControlCOCKPIT Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED)
Adjustable parameters Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Function SetpointWAIT The process time does not start until the set temperature is reached
Language setting German/English/Spanish/French
Calibration Three freely selectable temperature values
Convection Natural convection
Fresh air admixture adjustment Adjustment of pre-heated fresh air admixture by air flap control in 10% steps
Vent Vent connection with restrictor flap
Programming AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Documentation Program stored in case of power failure
Temperature control Adjustable electronic over-temperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Auto diagnostic system For fault analysis
Door Fully insulated stainless steel door with 2-point locking (compression door lock)
Internals 1 stainless steel grid
Housing Rear zinc-plated steel
Interior Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Volume 32 l
Max. loading of chamber 132 lbs
Country of Origin Germany
Dimensions 23” x 27.7” x 17.1”
Weight 99 lbs.
Electrical data 115 V 50/60 Hz / 14.0 amps

Usually Ships in 24 to 72 Hours
Memmert UF30 Forced Circulation Oven 32L, 115V Memmert UF30 Forced Circulation Oven 32L, 115V

Setting Temperature Range +20 to +300°C
Working Temperature Range Min. 10°C above ambient up to +300°C
Volume 32 L (1.13 cu.ft.)
Setting Resolution (temperature) 0.1°C up to 99.9°C, 0.5°C from 100°C and actual values 0.1°C (LED)
Temperature Sensor 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT The process time does not start until the set temperature is reached
Calibration Three freely selectable temperature values
Adjustable Parameters Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Fan Forced air circulation by quiet air turbine, adjustable in 10 % steps
Fresh Air Adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
Vent Vent connection with restrictor flap
Data Logging AtmoCONTROL software on a USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Door Fully insulated stainless steel doors with 2-point locking (compression door lock), inner glass doors
Works Calibration Certificate Includes works calibration certificate for +160°C
Interior Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves 3
Max. Loading of Chamber 132 lbs
Max. Loading per Shelf 44 lbs
Interior Dimensions (WxHxD) 15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm)
Exterior Dimensions (WxHxD) 23” x 27.8” x 17.1” (58.4 x 70.5 x 43.4 cm)
Net Weight Approx. 100 lbs
Electrical Data 115 V, 50/60 Hz, approx. 1600 W

Usually Ships in 24 to 72 Hours
Yamato DKN-812C Programmable Forced Convection Oven 300L, 220V Yamato DKN-812C Programmable Forced Convection Oven 300L, 220V

Internal Capacity 300L
Circulation Method Forced air circulation
Operating Temp. Range Room temp. +10°C to 260°C
Temp. Adjustment Accuracy ± 1°C (at 210°C)
Temp. Distribution Accuracy ± 2.5°C (at 210°C)
Max. Temp. Reaching Time ~60 min.
Interior/Exterior Material Stainless steel / Cold rolled steel plate with melamine resin baking finish
Shelf Plate With Standard Load ~15kg/piece
Shelf Rest Step Number / Shelf Rest Pitch 29 steps / 30mm
Heat Insulating Material Glass wool
Heater SUS pipe heater/1.5kW×2
Fan Type / Fan Motor 1pc / 30W
Cable Hole 30mm I.D. (on the right side) 1pc.
Exhaust Port 30mm I.D. × 2 (on top)
Observation Window None
Temp. Controller 3 patterns program controller, PID control by microprocessor
Temp. Setting Method Digital setting by ▲/▼ key
Temp. Display Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation Function Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop
Program Mode Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional Functions Calibration off-set function, Key lock, Uninterruptible power for memory
Heater Circuit Control SSR control
Sensor K-thermocouple
Safety Device Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Internal Dimensions (W × D × H) 23.6 × 19.7 × 39.4 in. (60 × 50 × 100 cm)
External Dimensions (W × D × H) 28.0 × 25.6 × 42.0 in. (71 × 65.1 × 106.8 cm)
Weight 242.5 lb. (110kg)
Electrical Requirements 220V, 50/60Hz, 15A

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $6,080.00
Our Price: $5,168.00
Money Saved: $912.00
Yamato DX-302C Natural Convection Oven 28L, 115V Yamato DX-302C Natural Convection Oven 28L, 115V

Circulation method Natural convection
Operating temperature range Room temp. +5°C to 300°C
Temperature control accuracy ±1°C (at 300°C)
Temperature distribution accuracy ±10°C (at 300°C)
Maximum temperature reaching time ~45 min
(Room temp. to 300°C)
Interior material Stainless steel
Exterior material Electro-galvanized steel sheet with melamine resin baking finish
Heat insulating material Glass wool
Heater Iron-chrome wire heater 0.9 kW
Exhaust port 33 mm I.D. x 2 pcs. (on top)
Temp. controller PID control by microprocessor
Temp. setting method Digital setting by ▲▼ key
Temp. display method Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional function Calibration off-set, Power failure compensation function, Key lock function
Heater circuit control SSR control
Sensor K-thermocouple
Safety device Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal dimensions W×D×H 300x310x300mm
External dimensions W×D×H 400x440x630mm
Internal capacity 28L
Shelf plate with standard load 15kg/piece
Shelf rest step number / pitch 6 steps / 35mm
Power source 50/60Hz AC115V 9.5A (with plug)
Weight ~23kg

Manufacturer's List Price: $1,610.00
Our Price: $1,393.00
Money Saved: $217.00
Yamato DX-602C Natural Convection Oven 153L, 115V Yamato DX-602C Natural Convection Oven 153L, 115V

Circulation method Natural convection
Operating temperature range Room temp. +5°C to 280°C
Temperature control accuracy ±1°C (at 300°C)
Temperature distribution accuracy ±10°C (at 280°C)
Maximum temperature reaching time ~80 min
(Room temp. to 280°C)
Interior material Stainless steel
Exterior material Electro-galvanized steel sheet with melamine resin baking finish
Heat insulating material Glass wool
Heater Iron-chrome wire heater 1.36 kW
Exhaust port 33 mm I.D. x 2 pcs. (on top)
Temp. controller PID control by microprocessor
Temp. setting method Digital setting by ▲▼ key
Temp. display method Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional function Calibration off-set, Power failure compensation function, Key lock function
Heater circuit control SSR control
Sensor K-thermocouple
Safety device Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal dimensions W×D×H 600x510x500mm
External dimensions W×D×H 700x640x830mm
Internal capacity 153L
Shelf plate with standard load 15kg/piece
Shelf rest step number / pitch 12 steps / 35mm
Power source 50/60Hz AC115V 14A (with plug)
Weight ~56kg

Usually Ships in 24 to 72 Hours
Manufacturer's List Price: $2,780.00
Our Price: $2,363.00
Money Saved: $417.00
   
 
Lab Ovens