Memmert IN750plus Natural Convection Incubator 749L, 115V

Features The Memmert IN750plus Natural Convection Incubator 749L, 115V offers an exceptional combination of precise temperature control and safety features for high-capacity applications. With a spacious 749-liter chamber, this incubator provides a temperature range from +20°C to +80°C, ensuring that your samples remain consistently within the desired conditions. The dual high-definition TFT-color displays of the ControlCOCKPIT adaptive digital PID-microprocessor controller allow for easy monitoring and adjustments. For enhanced precision, the system utilizes two Pt100 Class A sensors in a 4-wire circuit to mutually monitor temperature, ensuring optimal conditions even in demanding situations. The incubator also includes a fixed sterilization program for the working chamber, with 4-hour cycles at 160°C to maintain a sterile environment.

Safety and durability are key features of the Memmert IN750plus. The AutoSAFETY system provides over- and undertemperature protection by automatically adjusting according to setpoint values, with alarms to alert users in case of deviations. The exterior is constructed from durable, textured stainless steel that resists corrosion and wear, while the interior features deep-drawn ribbing and large-area heating on all four sides for consistent heat distribution. The interior's stainless-steel design enhances the incubator’s longevity and hygiene, making it ideal for temperature-sensitive applications in laboratories and industrial settings. Additionally, adjustable shelving allows for flexible sample arrangements and can support a maximum chamber load of up to 661 kg, ensuring versatility for diverse lab requirements.

Memmert IN750plus Natural Convection Incubator 749L, 115V Specifications

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	749 L (26.4 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel doors with 2-point locking (compression door lock), inner glass doors
Shelving	2 stainless steel grids, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	14
Max. Loading of Chamber	661 lbs (300 kg)
Max. Loading per Shelf	66 lbs (30 kg)
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	40.9 x 47.2 x 23.6 inches
Exterior Dimensions (WxHxD)	48.2 x 67.9 x 30.9 inches
Net Weight	Approx. 474 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1800 W