|
|
|
|
Memmert IN160plus Natural Convection Incubator 161L, 115V
Setting Temperature Range +20 to +80°C
Convection Type
Natural Convection
Chamber Volume 161 L (5.7 cu.ft.)
- Set temperature range from min. 5°C above ambient up to +80°C, with a display resolution of 0.1°C for precise control
- Control technology includes adjustable parameters such as temperature (Celsius or Fahrenheit), air flap position, program time, and daylight savings time
- HeatBALANCE function adapts the heating distribution between upper and lower circuits from -50% to +50% for optimal performance
- Fixed sterilization program (4 hours/160°C) for chamber sterilization (not for load sterilization)
- AutoSAFETY system provides integrated over- and undertemperature protection with visual and audible alarms
- Stainless steel interior with a volume of 161 L and a max chamber load of 462 lbs, offering robust durability
- AtmoCONTROL software available for data logging, programming, and management via USB or Ethernet
- High-quality textured stainless steel casing, scratch-resistant and durable, with dimensions of 29.3" x 43.5" x 23"
The Memmert IN160plus Natural Convection Incubator 161L, 115V is designed for precision temperature control in demanding laboratory applications. With a working temperature range of min. 5°C above ambient up to +80°C, this incubator ensures consistent conditions for your samples. The twin Pt100 sensors in a 4-wire circuit provide accurate temperature monitoring, while the adaptive HeatBALANCE function allows for fine-tuned heat distribution between the upper and lower heating circuits. The sterilization feature, with a fixed 4-hour cycle at 160°C, ensures a sterile environment within the chamber, safeguarding the integrity of your work.
Equipped with the advanced ControlCOCKPIT system, this incubator offers an intuitive interface with dual high-definition TFT displays, allowing users to adjust parameters such as temperature, air flap position, and program times. The durable stainless steel interior, reinforced with deep-drawn ribbing, provides 161 liters of internal volume and can support up to 462 lbs of total load. For seamless data management, the AtmoCONTROL software enables logging and program management via USB or Ethernet. The Memmert IN160plus combines innovation, safety, and durability, making it a top choice for precise incubation needs.
The
Memmert IN160plus Natural Convection Incubator 161L, 115V includes:
- 2 Stainless Steel Grids
- Tilt Protection Wall Bracket
- Calibration Certificate
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 3 Year Manufacturer's Warranty
Memmert IN160plus Natural Convection Incubator 161L, 115V Specifications
Setting Temperature Range
|
+20 to +80 °C
|
Working Temperature Range
|
At least 5°C above ambient temperature to +80 °C
|
Internal Volume
|
161 L (5.7 cu.ft.)
|
Setting Resolution (temperature)
|
0.1 °C
|
Temperature Sensor
|
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
|
Control Panel
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
Timer
|
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
|
Function SetpointWAIT
|
Process time does not start until the set temperature is reached
|
Calibration
|
Three freely selectable temperature values
|
Adjustable Parameters
|
Temperature (Celsius or Fahrenheit), air flap position, timer
|
Convection
|
Natural convection
|
Fresh Air
|
Admixture of pre-heated fresh air by electronically adjustable air flap
|
Vent
|
Vent connection with restrictor flap
|
Data Logging
|
AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
|
Temperature Control
|
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
|
Autodiagnostic System
|
For fault analysis
|
Door
|
Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
|
Shelving
|
2 stainless steel grids, electropolished
|
Works Calibration Certificate
|
Includes works calibration certificate for +37°C
|
Interior
|
Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
|
Max. Number of Shelves
|
8
|
Max. Loading of Chamber
|
462 lbs (210 kg)
|
Max. Loading per Shelf
|
44 lbs (20 kg)
|
Housing
|
Rear zinc-plated steel
|
Set Up
|
Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
|
Interior Dimensions (WxHxD)
|
22 x 28.4 x 15.8 inches
|
Exterior Dimensions (WxHxD)
|
29.3 x 43.5 x 23 inches (d +2.2” door handle)
|
Net Weight
|
Approx. 243 lbs
|
Electrical Data
|
115 V, 50/60 Hz, approx. 900 W
|
Spec / Product
|
Memmert IN30plus Natural Convection Incubator
|
Memmert IN55plus Natural Convection Incubator
|
Memmert IN75plus Natural Convection Incubator
|
Memmert IN110plus Natural Convection Incubator
|
Memmert IN160plus Natural Convection Incubator
|
Memmert IN260plus Natural Convection Incubator
|
Memmert IN450plus Natural Convection Incubator
|
Memmert IN750plus Natural Convection Incubator
|
Internal Volume
|
32 L (1.1 cu.ft.)
|
53 L (1.9 cu.ft.)
|
74 L (2.6 cu.ft.)
|
108 L (3.8 cu.ft.)
|
161 L (5.7 cu.ft.)
|
256 L (9 cu.ft.)
|
449 L (15.9 cu.ft.)
|
749 L (26.4 cu.ft.)
|
Working Temperature Range
|
At least 5°C above ambient temperature to +80 °C
|
At least 5°C above ambient temperature to +80°C
|
At least 5°C above ambient temperature to +80 °C
|
At least 5°C above ambient temperature to +80°C
|
At least 5°C above ambient temperature to +80 °C
|
At least 5°C above ambient temperature to +80 °C
|
At least 5°C above ambient temperature to +80°C
|
At least 5°C above ambient temperature to +80 °C
|
Setting Temperature Range
|
+20 to +80 °C
|
+20 to +80 °C
|
+20 to +80 °C
|
+20 to +80°C
|
+20 to +80 °C
|
+20 to +80 °C
|
+20 to +80°C
|
+20 to +80 °C
|
Control Panel
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
|
Max. Number of Shelves
|
3
|
4
|
6
|
5
|
8
|
9
|
8
|
14
|
Max. Loading per Shelf
|
44 lbs (20 kg)
|
44 lbs (20 kg)
|
44 lbs (20 kg)
|
44 lbs (20 kg)
|
44 lbs (20 kg)
|
44 lbs (20 kg)
|
66 lbs (30 kg)
|
66 lbs (30 kg)
|
Interior Dimensions
|
15.7 x 12.6 x 9.8 inches
|
15.8 x 15.8 x 13 inches
|
15.7 x 22 x 13 inches
|
22 x 18.9 x 15.7 inches
|
22 x 28.4 x 15.8 inches
|
25.2 x 31.5 x 19.7 inches
|
40.9 x 28.4 x 23.6 inches
|
40.9 x 47.2 x 23.6 inches
|
Electrical Data
|
115 V, 50/60 Hz, approx. 800 W
|
115 V, 50/60 Hz, approx. 900 W
|
115 V, 50/60 Hz, approx. 900 W
|
115 V, 50/60 Hz, approx. 900 W
|
115 V, 50/60 Hz, approx. 900 W
|
115 V, 50/60 Hz, approx. 900 W
|
115 V, 50/60 Hz, approx. 1500 W
|
115 V, 50/60 Hz, approx. 1800 W
|
|
|
|
|
|
|
|