Memmert IN30plus Natural Convection Incubator 32L, 115V

Features The Memmert IN30plus Natural Convection Incubator 32L, 115V offers precise and reliable temperature control for sensitive sample incubation. With a setting temperature range of +20°C to +80°C and working capability 5°C above ambient, this compact 32 L stainless steel chamber is ideal for a variety of laboratory needs. Equipped with dual Pt100 sensors in a 4-wire circuit, it ensures accurate monitoring and safety through redundancy. The TwinDISPLAY ControlCOCKPIT with an adaptive PID-microprocessor controller provides intuitive user control, while the natural convection system ensures uniform temperature distribution throughout the chamber.

Designed for efficiency and user convenience, the incubator features an electronically adjustable air flap for the precise admixture of pre-heated fresh air. With a maximum chamber load of 132 lbs, it supports high-capacity sample handling. The Memmert IN30plus also includes advanced safety features, such as AutoSAFETY, an overtemperature monitor, and an autodiagnostic system, ensuring continuous and secure operation. This high-performance incubator is a dependable solution for labs seeking consistent results and easy operation.

Memmert IN30plus Natural Convection Incubator 32L, 115V Specifications

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Internal Volume	32 L (1.1 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel	ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	1 stainless steel grid, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	3
Max. Loading of Chamber	132 lbs (60 kg)
Max. Loading per Shelf	44 lbs (20 kg)
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	15.7 x 12.6 x 9.8 inches
Exterior Dimensions (WxHxD)	23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight	Approx. 106 lbs
Electrical Data	115 V, 50/60 Hz, approx. 800 W