Memmert IN30 Natural Convection Incubator 32L, 115V

Features The Memmert IN30 Natural Convection Incubator 32L, 115V is a reliable, compact solution for precise temperature control in laboratory applications. With a 32 L (1 cu.ft.) stainless steel chamber, this incubator is designed to handle diverse sample needs within a temperature range from at least 5°C above ambient to +80°C. Equipped with a highly accurate Pt100 sensor DIN class A in a 4-wire circuit and the ControlCOCKPIT SingleDISPLAY digital PID-microprocessor, adjustments are easily managed on its high-definition TFT display. The natural convection system ensures uniform temperature distribution throughout the chamber, while an electronically adjustable air flap allows pre-heated fresh air flow. The incubator supports a maximum chamber load of 132 lbs and incorporates an autodiagnostic system with adjustable overtemperature monitoring for dependable performance and safety.

Memmert IN30 Natural Convection Incubator 32L, 115V Specifications

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5°C above ambient temperature to +80 °C
Volume	32 L (1.1 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System	For fault analysis
Door	Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving	1 stainless steel grid, electropolished
Works Calibration Certificate	Includes works calibration certificate for +37°C
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	3
Max. Loading of Chamber	132 lbs
Max. Loading per Shelf	44 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	15.7 x 12.6 x 9.8 inches
Exterior Dimensions (WxHxD)	23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight	Approx. 106 lbs
Gross Weight (Carton)	Approx. 142 lbs
Electrical Data	115 V, 50/60 Hz, approx. 800 W / 7 A