Memmert IN260 Natural Convection Incubator 256L, 115V

Features The Memmert IN260 Natural Convection Incubator 256L, 115V is designed to provide precise and efficient temperature control for a variety of laboratory applications. With a spacious 256 L (9 cu.ft.) chamber, this unit accommodates a range of sample sizes, maintained within a temperature range of at least 5°C above ambient up to +80°C. Its high-resolution display with 0.1°C accuracy allows precise control over set points and actual temperature values, while the inner glass door ensures convenient sample viewing without disturbing the chamber environment. Featuring adjustable parameters—such as temperature, air flap position, and program timing—along with the SetpointWAIT function, which initiates timing only once the set temperature is reached, this incubator is designed for exacting standards. The multi-language interface offers support in German, English, Spanish, and French, with an easy-to-clean, reinforced stainless steel interior that promotes consistent heat distribution. For added safety, the unit includes an autodiagnostic system with an adjustable overtemperature monitor.

Memmert IN260 Natural Convection Incubator 256L, 115V Specifications

Setting Temperature Range	+20 to +80 °C
Working Temperature Range	At least 5 above ambient temperature to +80 °C
Volume	256 L (9 cu.ft.)
Setting Resolution (temperature)	0.1 °C
Temperature Sensor	1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel	ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	Process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), air flap position, timer
Convection	Natural convection
Fresh Air	Admixture of pre-heated fresh air by electronically adjustable air flap
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control	Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door	Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior	Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves	9
Max. Loading of Chamber	661 lbs
Max. Loading per Shelf	44 lbs
Housing	Rear zinc-plated steel
Set Up	Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)	25.2 x 31.5 x 19.7 inches
Exterior Dimensions (WxHxD)	32.4 x 46.6 x 26.9 inches (d +2.2” door handle)
Net Weight	Approx. 243 lbs
Electrical Data	115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A