Memmert UF75plus Forced Circulation Oven 74L, 115V

Features The Memmert UF75plus Forced Circulation Oven 74L, 115V is a versatile and high-performance oven designed to meet the rigorous demands of laboratory applications. Its working temperature range from 10°C above ambient to +300°C provides the flexibility needed for various thermal processes. Equipped with TwinDISPLAY, this oven offers precise control through its multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays, ensuring reliable and easy monitoring of all critical parameters. The 74L (2.61 cu.ft.) chamber, with its stainless steel interior and deep-drawn ribbing, allows for uniform heating, while its easy-to-clean design adds to its convenience and longevity.

The UF75plus prioritizes safety with comprehensive mechanisms such as the overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB. These features are further enhanced by AutoSAFETY technology, which includes over- and undertemperature monitoring, ensuring that any deviations trigger timely alarms. The oven's advanced functionality is supported by the AtmoCONTROL software, allowing users to program, manage, and transfer data through a USB or Ethernet interface. With additional features like Function SetpointWAIT, which ensures the process begins only when the target temperature is reached, and the ability to adjust fan speed and fresh air admixture in 10% increments, the UF75plus is a top-tier solution for precise, safe, and efficient thermal processing.

Memmert UF75plus Forced Circulation Oven 74L, 115V Specifications

Setting Temperature Range	+20 to +300°C
Working Temperature Range	Min 10°C above ambient up to +300°C
Volume	74 L (2.61 cu. ft.)
Setting Resolution (temperature)	0.1°C up to 99.9°C, 0.5°C from 100°C, and for actual values 0.1°C (LED)
Temperature Sensor	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Control Panel	TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	The process time does not start until the set temperature is reached
Calibration	Three freely selectable temperature values
Adjustable Parameters	Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Fan	Forced air circulation by quiet air turbine, adjustable in 10% steps for each segment individually
Fresh Air Admixture	Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment individually
Vent	Vent connection with restrictor flap
Data Logging	AtmoCONTROL software on a USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control	Overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY	Integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature
Door	Fully insulated stainless steel door with 2-point locking (compression door lock)
Works Calibration Certificate	Includes works calibration certificate for +160°C
Interior	Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves	6
Max. Loading of Chamber	264 lbs
Max. Loading Per Shelf	44 lbs
Interior Dimensions (WxHxD)	15.8” x 22” x 13” (40.1 x 55.9 x 33 cm)
Exterior Dimensions (WxHxD)	23” x 37.3” x 20.2” (58.4 x 94.7 x 51.3 cm)
Net Weight	Approx. 146 lbs
Electrical Data	115 V, 50/60 Hz, approx. 1800 W