 |
 |
 |
|
A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I)
- NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments
- Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS
- Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance
- Simplify your daily precision check and SOPs with the standard deviation function
- Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management
- Reduce errors and damage with impact shock detection and overload protection
- Eliminate static disturbance of samples with available fanless / touchless ionizer
- The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration
- Six simple and straightforward keys
- A quick toggle to change between USB and RS-232C communication
- Easily level the balance (even with gloves on!) the illuminated, front mounted level
- Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety
- Automatic self-calibration and one-touch internal/external calibration ensure valid results
- FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density
- FR-Compare – comparator that provides feedback if the flow rate is within limits
The A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), provides high-precision measurements with a 220 g capacity and 0.0001 g readability. This NTEP-certified balance ensures accurate, reliable results for regulated environments. It includes a fanless ionizer, standard in AEN models, which neutralizes static charges without contact, ensuring stable, disturbance-free weighing. An external IR sensor enables touch-free operation, preserving cleanliness and enhancing accuracy by allowing users to interact with the balance without direct contact.
The Electronically Controlled Load (ECL) management system supports repeatability testing and automatic precision checks without external weights, further reinforcing measurement reliability. The GX-224AEN features a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput settings where speed and accuracy are critical.
Streamlining daily operations and ensuring USP41 compliance, this advanced tool alerts users when sample sizes fall below minimum weight, reducing waste and boosting efficiency. Impact shock detection and overload protection provide added durability, while six simple keys and a quick toggle function facilitate smooth switching between USB and RS-232C communication options for flexible data management.
Enhanced usability features include an illuminated, front-mounted level for easy leveling, even with gloves on, along with automatic self-calibration and one-touch internal/external calibration to ensure valid results. An extensive range of measurement units, along with percent calculation and piece counting capabilities, add versatility for diverse scientific applications. With a robust design, NTEP certification, and advanced features like the IR sensor, the A&D Weighing Apollo GX-224AEN Analytical Balance is an outstanding choice for professionals seeking precise, regulated analytical capabilities. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use.
The
A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes:
- Touchless IR Switch
- External Key Jack
- Large Glass Breeze Break with Built-in Fanless Ionizer
- Breeze Break Ring
- Weighing Pan
- Bubble Spirit Level
- USB Cable
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 5 Year Manufacturer's Warranty
A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I)Specifications
|
Capacity
|
220 g
|
|
Readability
|
0.0001 g
|
|
Repeatability (S.D.)
|
0.0001 g
|
|
Linearity
|
±0.0003 g
|
|
Minimum Weight (Typical)
|
120 mg
|
|
Stabilization Time (Set to FAST)
|
Approx. 2 sec
|
|
Sensitivity Drift
|
±2 ppm/°C (10 to 30 °C/50 to 86 °F, when automatic self-calibration is OFF)
|
|
NTEP Certification
|
Class I
|
|
Operating Temperature
|
5 to 40 °C (41 to 104 °F), 85% RH or less (no condensation)
|
|
Display Refresh Rate
|
5, 10, or 20 times/sec
|
|
Measurement Units (Display Mode)
|
mg, g, oz, ozt, ct, mom, dwt, gr, pcs (counting), %, SG (density), user-programmable unit
|
|
Counting Mode
|
Minimum unit mass: 0.0001 g; Sample sizes: 5, 10, 25, 50, 100 pieces
|
|
Percent Mode
|
Minimum reference mass: 0.0100 g; % readability: 0.01%, 0.1%, or 1% (depends on reference mass)
|
|
Data Output
|
Real-time output to connected devices
|
|
Standard Interface
|
RS-232C and USB
|
|
Internal Calibration
|
Automatic self-calibration and one-touch internal/external calibration
|
|
External Calibration Masses (g)
|
50 g, 100 g, 200 g
|
|
Weighing Pan Diameter
|
Ø90 mm
|
|
Dimensions (W x D x H)
|
10.2 x 14.1 x 13.1 in. (259 x 358 x 332 mm) including large glass breeze break
|
|
Weight
|
15.4 lb (7 kg)
|
|
Electrical Requirements
|
AC adapter / approx. 30 VA
|
|
Spec / Product
|
GX-124AE
|
GX-124AEN
|
GX-224AE
|
GX-224AEN
|
GX-324AE
|
GX-324AEN
|
|
Capacity
|
120 g
|
120 g
|
220 g
|
220 g
|
320 g
|
320 g
|
|
Readability
|
0.0001 g
|
0.0001 g
|
0.0001 g
|
0.0001 g
|
0.0001 g
|
0.0001 g
|
|
Repeatability (S.D.)
|
0.0001 g
|
0.0001 g
|
0.0001 g
|
0.0001 g
|
0.0002 g (300 g)
|
0.0001 g
|
|
Linearity
|
± 0.0002 g
|
± 0.0002 g
|
±0.0003 g
|
± 0.0003 g
|
± 0.0002 g
|
± 0.0002 g
|
|
Counting Mode
|
Min. unit mass 0.0001 g
Number of samples 5, 10, 25, 50 or 100 pieces
|
Min. unit mass 0.0001 g
Number of samples 5, 10, 25, 50 or 100 pieces
|
Min. unit mass: 0.0001 g;
Sample sizes: 5, 10, 25, 50, 100 pieces
|
Min. unit mass: 0.0001 g;
Sample sizes: 5, 10, 25, 50, 100 pieces
|
Min. unit mass: 0.0001 g;
Sample sizes: 5, 10, 25, 50, 100 pieces
|
Min. unit mass: 0.0001 g;
Sample sizes: 5, 10, 25, 50, 100 pieces
|
|
Stabilization Time (Set to FAST)
|
Approx. 1.5 sec (100 g)
|
Approx. 1.5 sec (100 g)
|
Approx. 2 sec (200 g)
|
Approx. 2 sec (200 g)
|
Approx. 2 sec (300 g)
|
Approx. 2 sec (300 g)
|
|
Linearity
|
± 0.0002 g
|
± 0.0002 g
|
± 0.0003 g
|
± 0.0003 g
|
± 0.0003 g
|
± 0.0002 g
|
|
NTEP Certification
|
N/A
|
Class I
|
N/A
|
Class I
|
N/A
|
Class I
|
|
Electrical Requirements
|
AC adapter / approx. 30 VA
|
AC adapter / approx. 30 VA
|
AC adapter / approx. 30 VA
|
AC adapter / approx. 30 VA
|
AC adapter / approx. 30 VA
|
AC adapter / approx. 30 VA
|
|
|
|
 |
|
 |
|
