105ºC to 126ºC

128ºC

45ºC to 60ºC

Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC
(programmable for up to 20 hours to prevent coagulation)

3 to 22 psi gauge (0.02 to 148MPa)

27 psi (0.186MPa)

1 to 250 minutes

Program autoclave to start 1 minute to 7 days later

19.0" x 18.0" x 37.4"
(48 cm x 46 cm x 95 cm)

25 liters
9.4" x 21.6" (24 cm x 55 cm)

Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion

Heating -> Sterilization -> Exhaust (fast, default) -> Completion

Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion

120V, 50/60 Hz (220V/240V available)

1500 watts (1500VA)

160 lb (73 kg)

105ºC to 135ºC

10ºC to 137ºC

45ºC to 60ºC

Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC
(programmable for up to 20 hours to prevent coagulations)

3 to 30 psi (0.021 to 0.206MPa)

38 psi ( 0.26MPa)

1 to 250 minutes

Program autoclave to start 1 minute to 7 days later

26.0" x 25.6" x 39.4"
(66 cm x 65 cm x 100 cm)

85 liters
16.5" x 24.2" (42.0 cm x 61.5 cm)

Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion

Heating -> Sterilization -> Exhaust (fast, default) -> Completion

Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion

208V/220V/240V, 50/60 Hz, single phase

3000 watts (3000VA)

282 lb (128 kg)

105ºC to 135ºC

137ºC

45ºC to 60ºC

Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC
(programmable for up to 20 hours to prevent coagulation)

3 to 30 psi (0.02 to 0.206MPa)

38 psi (0.26MPa)

1 to 250 minutes

Program autoclave to start 1 minute to 7 days later

20" x 21" x 41"
(51 cm x 53 cm x 104 cm)

50 liters
11.8" x 28.0" (30 cm x 71 cm)

Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion

Heating -> Sterilization -> Exhaust (fast, default) -> Completion

Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion

120V, 50/60 Hz (220V/240V available)

2000 watts (2000VA)

180 lb (82 kg)

105ºC to 135ºC

10ºC to 137ºC

45ºC to 60ºC

Heating at 60ºC to 100ºC for up to 1 hour (temperature and time programmable), followed by 45ºC to 60ºC
(programmable for up to 20 hours to prevent coagulations)

3 to 30 psi (0.021 to 0.206MPa)

38 psi ( 0.26MPa)

1 to 250 minutes

Program autoclave to start 1 minute to 7 days later

26.0" x 25.6" x 46.5"
(66 cm x 65 cm x 118 cm)

110 liters
16.5" x 31.3" (42.0 cm x 79.5 cm)

Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Warming -> Completion

Heating -> Sterilization -> Exhaust (from no exhaust to slow, programmable) -> Completion

Heating -> Sterilization -> Exhaust (fast, default) -> Completion

Rapid melting at 60°C to 100°C (temperature and time programmable) -> Maintain at 45°C to 60°C (temperature programmable) -> Completion

208V/220V/240V, 50/60 Hz, single phase

4000 watts (4000VA)

308 lb (140 kg)

19.7" x 27.2" x 40.6"
(45.5 cm x 69.1 cm x 103.0 cm)

76 liters
14.3" x 28.7" (36.4 cm x 73.0 cm)

105°C to 135°C

1 to 300 minutes

After sterilization, agar can be maintained from 45°C to 60°C (programmable) for up to 24 hours to prevent coagulation

Program autoclave to start 1 to 99 hours later

Switch to turn fan on or off

Programmable, 3 to 9 minutes after temperature has reached 97°C

Selectable from: No venting and three other venting rates

Programmable, 60°C to 97°C for greater safety and flexibility

1) Liquid cycle, 2) Agar (liquid with warming) cycle, and 3) Solid cycle

Cycle for dissolving and keeping agar warm (no sterilization)

Initially at 60°C-100°C for 1-60 min., then at 45°C-60°C for up to 24 hrs.

Circuit breaker with GFCI, low-water power cut-off, over-temp power cutoff, over-pressure power cut-off, safety valve, sensor for improper lid closing

15-liter water tank

2 liters

220V, 50/60 Hz, single phase

3.8 kW

255 lb (116 kg)

105ºC to 135ºC

137ºC

After sterilization, agar can be maintained from 45ºC to 60ºC
(programmable) to prevent coagulation for up to 20 hours.

38 psi (0.26MPa)

3 to 30 psi (0.021 to 0.206MPa)

1 to 250 minutes

26.0"" x 25.6" x 39.4"
(66 cm x 65 cm x 100 cm)

85 liters
16.5" x 24.2" (42.0 cm x 61.5 cm)

Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker

Heating -> Sterilization -> Auto steam exhaust or ambient cooling (programmable) -> Warming -> Completion

Heating -> Sterilization -> Auto steam exhaust or ambient cooling (programmable) -> Completion

Heating -> Sterilization -> Auto exhaust (fast) -> Completion

208V / 220V / 240V, 50 / 60 Hz, single phase

3000 watts (3000VA)

282 lb (128 kg)

105ºC to 135ºC

137ºC

After sterilization, agar can be maintained from 45ºC to 60ºC
(programmable) to prevent coagulation for up to 20 hours.

38 psi (0.26MPa)

3 to 30 psi (0.021 to 0.206MPa)

1 to 250 minutes

26.0" x 25.6" x 46.4" in
(66 cm x 65 cm x 118cm)

110 liters
16.5" x 31.3" (42.0 cm x 79.5 cm)

Dual-sensing lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, microprocessor-controlled pressure relief valve, lid-closure detector, over-current detector and circuit breaker

Heating -> Sterilization -> Auto steam exhaust or ambient cooling (programmable) -> Warming -> Completion

Heating -> Sterilization -> Auto steam exhaust or ambient cooling (programmable) -> Completion

Heating -> Sterilization -> Auto exhaust (fast) -> Completion

208V / 220V / 240V, 50 / 60 Hz, single phase

4000 watts (4000VA)

308 lb (140 kg)

105ºC to 135ºC

5ºC to 140ºC

3 to 28.4 psi (0.2 to 2.0 kg/cm² )

1 to 250 minutes

1 to 90 minutes

20.1" x 24.8" x 40.9" (51 x 63 x 104) cm

50 liter
11.8" x 28" (30 cm x 71 cm)

Temperature- and pressure-sensitive lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, lid-closure detector, over-current detector and circuit breaker with ground fault circuit interrupter.

Heating and air removal from chamber by vacuum pump (pre-vac) -> Sterilization -> Water and steam exhaust (fast) -> Drying by heat and vacuum -> Completion

Heating -> Pre-vac -> Sterilization -> Steam exhaust (fast) -> Completion

Heating -> Sterilization -> Auto steam exhaust (programmable rates, or ambient cooling w/o steam exhaust) -> Completion

Drying with heat and vacuum (time programmable) -> Completion(for additional drying after Program #1, if desired)

120V, 50/60 Hz, single phase (220V/240V available on request)

2000 watts (2000 VA)

291 lb (133 kg)

19.7" x 27.2" x 35.0"
(45.5 cm x 69.1 cm x 89.0 cm)

50 liters
14.3" x 19.0" (36.4 cm x 48.2 cm)

105°C to 135°C

1 to 300 minutes

After sterilization, agar can be maintained from 45°C to 60°C (programmable) for up to 24 hours to prevent coagulation

Program autoclave to start 1 to 99 hours later

Switch to turn fan on or off

Programmable, 3 to 9 minutes after temperature has reached 97°C

Selectable from: No venting and three other venting rates

Programmable, 60°C to 97°C for greater safety and flexibility

1) Liquid cycle, 2) Agar (liquid with warming) cycle, and 3) Solid cycle

Cycle for dissolving and keeping agar warm (no sterilization)

Initially at 60°C-100°C for 1-60 min., then at 45°C-60°C for up to 24 hrs.

Circuit breaker with GFCI, low-water power cut-off, over-temp power cutoff, over-pressure power cut-off, safety valve, sensor for improper lid closing

15-liter water tank

2 liters

120V or 220V, 50/60 Hz, single phase

2.0kW, optional 3.0kW for 220V only

180 lb (82 kg)