 |
 |
 |
|
Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase
Operating Temperature Range
40 to 200°C
Operating Pressure Range
101 - 0.1kPa (760 - 1 Torr)
- Vacuum pump can be installed inside the oven
- Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance
- Improved working efficiency as exhaust system is improved to significantly shorten the time to reach vacuum
- Use specialized function menu key and up/down key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc.
- Self-diagnosis circuit (abnormal temperature sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc.
- For safety, resin protection panel is installed at the observation window
Large scale 1000L vacuum drying oven designed for treatment of large-sized parts. Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance. Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved. Use specialized function menu key and ▲▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. Vacuum pump can be installed inside the oven. Operating temp. range of 40~200° C
The Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase includes:
- Stainless Steel Punching Plates, 4 pcs.
- Power Cord
- 1 Year Manufacturer's Warranty
- Manufacturer's Documentation
Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase
|
Method
|
Decompressed chamber wall heating
|
|
Operating Temp. Range
|
40 to 200°C
|
|
Operating Vacuum Range
|
101 to 0.1kPa (760~1Torr)
|
|
Temp. Adjustment Accuracy
|
±1.0°C (at 200°C)
|
|
Interior
|
Stainless steel plate
|
|
Exterior
|
Cold rolled steel plate with chemical proofing coating
|
|
Insulating Material
|
Glass fiber
|
|
Heating Method
|
Decompressed chamber wall direct heating
|
|
Heater Power
|
14.4kW
|
|
Observation Window
|
Toughened glass + resin protection panel
|
|
Vacuum Gauge
|
Pointer type, -100~0kPa
|
|
Vacuum Pump Installation Room
|
Yes
|
|
Temp. Control
|
3 segments PID
|
|
Temp. Setting
|
Use specialized function menu key and up/down key to set
|
|
Temp. Display
|
Measured temp. display: green 4-digit LED digital display
Setting temp. display: red 4-digit LED digital display
|
|
Timer
|
1min-99 hr 59 min and 100 hr-999 hr 50 min (attached with timing wait function)
|
|
Operation Function
|
Fixed temp. auto start, auto stop, program operation
|
|
Program Mode
|
Program operation 3 segments 30 steps (30 steps×1, 15 steps×2, 10 steps×3)
|
|
Additional Function
|
Deviation correction, key lock, power outage compensation
|
|
Heater Circuit Control
|
SSR driving
|
|
Sensor
|
K thermocouple (temp. controller and overheat protector)
|
|
Safety Device
|
Self-diagnosis circuit (abnormal temp. sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, EBL to prevent overcurrent, key lock, etc.
|
|
Internal Dimensions W×D×H
|
1000×1000×1000 mm
|
|
External Dimensions W×D×H
|
1300×1280×2110 mm
|
|
Internal Capacity
|
1000L
|
|
Air Exhaust Port
|
NW40 flange
|
|
Air Suction Port
|
Rc 3/8
|
|
Power Source (50/60Hz) Rated Current
|
3 phase AC480V 18A (no plug, round terminal)
|
|
Weight
|
~1000kg
|
|
Included Accessories
|
Stainless steel punching plates, 4 pcs.
|
|
Optional Accessories
|
Shelf plate, vacuum pump, N₂ introduction device, recorder, alarm indicator lamp (stand-by/running/malfunction), temp. output terminal (4~20mA), Output terminal for external alarm, time up output terminal
|
|
|
|
 |
|
 |
|
