|
Number of analog input channels
|
20 channels in standard configuration, Expandable up to 200 channels
|
|
Number of analog input terminals
|
Up to 10 terminals (20 channels / terminal), standard config:1
|
|
Type of analog input terminal
|
Multi-input type, Withstand-voltage type
|
|
Port for digital sensor
|
1 port for the sensor/input terminal/adapter of GL100
|
External input/
output
|
Input - Trigger or Sampling (1 channel), Logic/Pulse (4 channels)
|
|
Output
|
Alarm (4 channels
|
|
Sampling interval
|
10 ms to 1 hour (10ms to 50ms: voltage only), External signal
|
|
Time scale of waveform display
|
1 sec. to 24 hour /division
|
Trigger,
Alarm function
|
Trigger action - Start or stop capturing data by the trigger
|
Pulse input
function
|
Rotation count
(RPM) mode
|
Accumulating
count mode
|
Accumulates the number of pulses from the start of measurement
50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
|
Instant count
mode
|
Counts the number of pulses per sampling interval
50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
|
Calculation
function
|
Addition, Subtraction, Multiplication, and Division for analog input
|
|
Statistical
|
Select two calculations from Average, Peak, Maximum, Minimum, RMS
|
|
Search function
|
Search for analog signal levels, values of logic or pulse or alarm point in captured data
|
|
Interface to PC
|
Ethernet (10 BASE-T/100 BASE-TX), USB (Hi-speed), WLAN (using B-568 option)
|
Storage
device
|
Built-in 4GB Flash Memory
|
|
External
|
One SD card slot (Supports SDHC memory card, up to 32GB)
|
|
Saved contents
|
Captured data, Setting conditions, Screen copy
|
|
Capturing mode
|
Mode: Normal, Ring, Relay
Ring: Saves most recent data (Number of capturing data: 1000 to 2000000 points
Relay: Saves data to multiple files without losing data until data capturing is stopped
|
|
Replay data
|
Replays captured data that was saved in the GL840 (in GBD or CSV format)
|
|
Scaling (Engineering unit) function
|
Measured value can be converted to specified engineering unit
Analog voltage: Converts using four reference points (gain, offset)
Temperature: Converts using two reference points (offset)
Pulse count: Converts using two reference points (gain)
|
|
Action during data capture
|
Displaying past data (using dual display mode (Current + Past data))
Hot-swapping the SD memory card
Saving data in between cursors
|
|
Display (LCD)
|
7-inch TFT color LCD (WVGA: 800 x 480 dots)
|
|
Language
|
English, French, German, Chinese, Korean, Russian, Spanish, Japanese
|
|
Information
|
Waveform in Y-T with digital values, Waveform only, Digital value, Digital values and statistics values, Bar chart
|
|
Operating environment
|
0 to 45 ºC, 5 to 85 % RH (non condensed)
(When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC)
|
|
Power source
|
100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory)
|
|
DC power
|
8.5 to 24 V DC (DC drive cable (option B-514) is required
|
|
Battery pack
|
Mountable two battery packs (battery pack (option B-569): 7.2V DC, 2900mAh)
|
|
Power consumption
|
Max. 36 VA
|
|
External dimensions WxDxH
|
~ 240 x 158 x 52.5 mm
|
|
Weight
|
~ 1010g
|
