 |
 |
 |
|
Yamato CB-100 Benchtop Water Circulator 3.4L, 115V
Cooling Capacity
230W at 10C
Operating Temperature Range
-10 to 80°C
Temperature Accuracy
±0.1°C
- High head and flow rate: Lift is ~3.3/4.7m (50/60 Hz), which is very high in this class, so even piping with pressure loss can be circulated sufficiently. In addition, the maximum flow rate is as large as ~6.8/8.0L/min (50/60 Hz).The lift and flow rates allow stable circulation even when installed under a desk.
- Easy to clean intake filter: Filter mounting plate located on the front of the unit can be easily removed when cleaning
- Standard equipped with drain: Maintenance work such as replacement of liquid can be easily performed. After use, it can be stored in the space inside the main unit.
- Nozzle can be used in any orientation: Since the nozzle is freely rotatable, it can be installed in any direction
- Compact: With a width of 180mm and a depth of 360mm, it is ideal for limited spaces
- Low GWP value that is friendly to the global environment: Since the alternative CFC refrigerant R-134a is used, the global warming potential is as low as 1430, good for the global environment.
Benchtop 3.4L water circulator with a wide temperature range of -10 ~ 80°C used for various applications. I's high head and flow rates allow stable circulation even when placed under a desk.
The Yamato CB-100 Benchtop Water Circulator 3.4L, 115V includes:
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 1 Year Manufacturer's Warranty
Yamato CB-100 Benchtop Water Circulator 3.4L, 115V Specifications
|
Circulation Type
|
Closed circulation/ tap water, anti-freeze solution (for 10°C or lower)
|
|
Temperature Control System
|
Refrigerator control + heater PID control
-10 to 50°C: Refrigerator ON, control by heater PID
50.1 to 80°C: Refrigerator OFF, control by heater PID only
|
|
Operating Ambient Temp. Range
|
5 to 30°C
|
|
Temp. Setting Range
|
-10°C to 80°C
|
|
Temp. Setting Range For Refrigerator Continuous Use
|
-10°C to 50°C
|
|
Max. Flow Rate *¹
|
8L/min.
|
|
Max. Head *¹
|
4.7m
|
|
Temp. Control Accuracy *²
|
±0.1°C
|
|
Cooling Capacity (Liquid Temp) *³
|
~230W (liquid temp. at 10°C)
|
|
Controller
|
7-segment 3-digit white LED digital display, key input, resolution: 0.1°C
|
|
Control Heater
|
115V 650W stainless steel
|
|
Refrigeration System / Rated Performance
|
Air cooling / 100W
|
|
Refrigerant
|
R134a
|
|
Temperature Sensor
|
Pt100Ω
|
|
Circulation Pump Motor
|
Induction motor 40W
|
|
Cooling Pipe
|
Stainless steel 304
|
|
External Input
|
External temperature sensor input connector
|
|
User Function
|
Calibration offset, auto-resume mode select
|
|
Safety Device
|
Overcurrent ELCB, temp. sensor failure, temp. rise/fall alarm (operation continues), temp. upper/lower limit error (operation stops), float switch for dry heating prevention, refrigeration overload relay, refrigeraotr high pressure cut-off switch, fan motor protection, circulation pump thermal protector, relay timer for refrigerator protection, overheat prevention device
|
|
Water Bath Material
|
Stainless Steel
|
|
Water Bath Capacity
|
~3.4L (Liquid volume 2.3L)
|
|
Power Source (50/60Hz)
|
Single phase AC115V 13A with plug
|
|
External Dimension WxDxH
|
180 x 360 (440) x 553 (600) mm (including protrusions)
|
|
Weight
|
~22kg
|
|
Included Accessories
|
Hose nozzle 10mm O.D. connection (for flexible hose connection (2), knurled screw (2)
|
|
|
|
 |
|
 |
|
