 |
 |
 |
|
Labconco 112116002 12' Protector XL Floor-Mounted Hood with Horizontal-Sliding Sashes, 37.7" Exterior Depth, with 2 Service Fixtures and 2 GFCI Duplexes, 100-115V, 50/60Hz
- By-pass airflow design
- By-pass block
- Glacier white powder-coated steel exterior
- Chemical-resistant molded composite panel liner and baffle
- Opti-Zone Baffles with flame spread less than 25 per ASTM E84. Baffles are removable for cleaning
- Removable front and side panels and exterior and interior service access panels for access to plumbing and electrical wiring
- Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
- 73.5" (187 cm) high sightline from the floor to the header panel
- 4', 5', 6' and 8' models have two tempered safety glass vertical-rising sashes with powder-coated aluminum sash handles and powder-coated steel sash tracks with Clean-Sweep slots. Upper sash handle also includes Clean-Sweep openings
- 8', 10', 12' and 16' models have four tempered safety glass horizontal-sliding sashes with powder-coated aluminum sash tracks
- Vertical-rising sash models have 63.6" (162 cm) loading height
- Horizontal-sliding sash models have 73.5" (187 cm) loading height
- Factory prepared for up to eight service fixtures including two gooseneck faucets
- Factory prepared for up to four electrical duplex receptacles and an airflow monitor
- Powder-coated, stainless steel 12.8" ID exhaust connection(s)
- Shipped in multiple sections: top, bottom and sashes
The Labconco Protector XL Floor-Mounted Laboratory Hoods (sometimes called Walk-In Hoods) accommodate laboratory procedures that require oversized equipment or maximum working height. Models with vertical-rising sashes meet the SEFA-1 standard of a low velocity high performance hood and may be operated as low as 60 fpm. Models with horizontal-sliding sashes have a loading height of 73.5” (186.7 cm), suitable for applications requiring tall distillation racks, extraction apparatus or large drums. Floor-mounted fume hoods are shipped partially unassembled and require some field assembly (not provided by Labconco). They are shipped on 2-3 pallets, requiring placement of lower and upper portions, installation of corner posts, baffles, header, and sashes, and connection of piping and electrical (if included). Detailed instructions are available upon request.
The Labconco 112116002 12' Protector XL Floor-Mounted Hood with Horizontal-Sliding Sashes, 37.7" Exterior Depth, with 2 Service Fixtures and 2 GFCI Duplexes, 100-115V, 50/60Hz includes:
- Two Pre-Plumbed Service Fixtures with Forged Brass Valves
- Two Pre-Wired GFCI Electrical Duplex Receptacles on Lower Left and Right Sides
- Power Cord
- Operator's Guide
- Manufacturer's Documentation
- 1 Year Manufacturer's Warranty
- Please Note: Remote Blower and Ductwork are required for operation and are NOT INCLUDED
Labconco 112116002 12' Protector XL Floor-Mounted Hood with Horizontal-Sliding Sashes, 37.7" Exterior Depth, with 2 Service Fixtures and 2 GFCI Duplexes, 100-115V, 50/60Hz Specifications
|
Product Subcategory:
|
General Chemistry
|
|
Nominal Width:
|
12'
|
|
Sash Movement Direction:
|
Horizontal Sliding
|
|
Blower Requirements:
|
Remote blower required
|
|
Conformance:
|
ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL 1805, UL 61010
|
|
Electrical Duplexes:
|
2
|
|
Enclosure Height:
|
95.0"
|
|
Lighting:
|
LED
|
|
Service Fixtures:
|
2
|
|
Style:
|
Floor-Mounted
|
|
Estimated Shipping Weight:
|
1,660.0 lbs
|
|
Estimated Shipping Weight metric:
|
753.0 kg
|
|
Dimensions:
|
144.0" w x 37.7" d x 95.0" h
|
|
Dimensions metric:
|
365.8 x 95.8 x 241.3 cm
|
|
Electrical:
|
115V, 60 Hz
|
|
|
|
 |
|
 |
|
