 |
 |
 |
|
Labconco 111800002 8' Protector XL Benchtop Hood, 31.7" Exterior Depth, with 2 Service Fixtures and 2 GFCI Duplexes, 100-115V, 50/60Hz
- By-pass airflow design
- Eco-Foil Air Foil with aerodynamic Clean-Sweep™ airflow openings
- Cord-Keeper™ Slots on left and right side of air foil
- Glacier white powder-coated steel exterior
- Chemical-resistant, fiberglass-reinforced, composite panel liner and baffle
- Opti-Zone™ Baffle with flame spread index less than 25 per ASTM E84. Baffle is removable for cleaning
- Tempered safety glass vertical-rising sash(es) with cable and pulley(s) and powder-coated aluminum sash handle(s). 8' models have optional split dual sashes. 10', 12' and 16' models have split dual sashes (four on 16' models)
- 37.5" (95.3 cm) high sightline from the work surface and header panel
- Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
- Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
- Powder-coated stainless steel, 12.8" (32.5 cm) ID exhaust connection(s)
- 10', 12' and 16' models also feature a by-pass block
The Labconco Protector XL Benchtop Laboratory Hoods are general chemistry hoods that offer superior design flexibility. They are available in widths from 3 to 16 feet and three depths to meet a variety of installation and application requirements. These hoods incorporate containment-enhancing features allowing them to operate at face velocities as low as 60 fpm and meet the SEFA-1 standard of a low velocity high performance hood.
The Labconco 111800002 8' Protector XL Benchtop Hood, 31.7" Exterior Depth, with 2 Service Fixtures and 2 GFCI Duplexes, 100-115V, 50/60Hz includes:
- Two Pre-Plumbed Service Fixtures with Forged Brass Valves
- Two Pre-Wired GFCI Electrical Duplex Receptacles on Lower Left and Right Sides
- Power Cord
- Operator's Guide
- Manufacturer's Documentation
- 1 Year Manufacturer's Warranty
- Please Note: Remote Blower, Ductwork, Work Surface, and Base Cabinet or Stand are required for operation and are NOT INCLUDED
Labconco 111800002 8' Protector XL Benchtop Hood, 31.7" Exterior Depth, with 2 Service Fixtures and 2 GFCI Duplexes, 100-115V, 50/60Hz Specifications
|
Product Subcategory:
|
General Chemistry
|
|
Nominal Width:
|
8'
|
|
Blower Requirements:
|
Remote blower required
|
|
Conformance:
|
ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
|
|
Electrical Duplexes:
|
1
|
|
Enclosure Height:
|
59.0"
|
|
Exterior Depth:
|
31.7" (80.5 cm)
|
|
Lighting:
|
LED
|
|
Service Fixtures:
|
2
|
|
Style:
|
Benchtop
|
|
Estimated Shipping Weight:
|
675.0 lbs
|
|
Estimated Shipping Weight metric:
|
306.0 kg
|
|
Dimensions:
|
96.0" w x 31.7" d x 59.0" h
|
|
Dimensions metric:
|
243.8 x 80.5 x 149.9 cm
|
|
Electrical:
|
100-115 volts, 50/60Hz, 10 amps
|
|
|
|
 |
|
 |
|
