Home > Brands >

Labconco 110410000 4' Protector XStream Laboratory Hood, 100-115V, 50/60Hz
Labconco 110410000 4' Protector XStream Laboratory Hood, 100-115V, 50/60Hz

 
Manufacturer's List Price: $12,135.00
Our Price: $11,808.86
Money Saved: $326.14

Price with Selected Options: $11,808.86

Condition: Brand New
Warranty: 1 Year Manufacturer's Warranty
Typically Ships Within: 6 to 7 Weeks

Request a Formal Quote




Quantity in Stock:



Product Code: 110410000

Additional Product Accessories

Additional Accessories:
Labconco Protector Standard Storage Cabinet (Additional $1,665.00)

Qty:
Description
Accessories
Technical Specification Sheet
 

Labconco 110410000 4' Protector XStream Laboratory Hood, 100-115V, 50/60Hz

Features
  • By-pass airflow design with variable air volume compatibility
  • Eco-Foil Air Foil with aerodynamic Clean-Sweep airflow openings
  • Cord-Keeper Slots on left and right side of air foil
  • Upper Dilution Air Supply
  • Glacier white powder-coated steel exterior
  • Rear Downflow Dual Baffle System
  • Chemical-resistant, fiberglass-reinforced, composite panel liner and baffles with flame spread index less than 25 per ASTM E84. Baffles are removable for cleaning
  • Opti-Zone Baffle with tapered slots
  • Tempered safety glass vertical-rising sash with cable and pulley
  • Powder-coated sash handle with aerodynamic Clean-Sweep openings
  • 37.5" (95.3 cm) high sightline from the work surface to the header panel
  • Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
  • Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting is rated for 50,000 hours
  • Sash stop located at 18" (45.7 cm) sash opening position
  • Powder-coated stainless steel, 12.8" (32.5 cm) ID exhaust connection(s)
The Labconco Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the mannequin. In all scenarios, the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory, the ability of this hood to contain under these adverse conditions sets a new standard of safety. Safety is foremost, but energy saving is equally impressive. Although face velocity is a factor, it’s the volumetric rate (CFM) that determines the energy consumption. Operating a 6' Protector XStream at 60 fpm face velocity, with the sash in its fully open position, requires only 690 CFM. Regardless of your desired operating face velocity, the Protector XStream yields the lowest required CFM of any hood.

INCLUDED:
The Labconco 110410000 4' Protector XStream Laboratory Hood, 100-115V, 50/60Hz includes:
  • Power Cord
  • Operator's Guide
  • Manufacturer's Documentation
  • 1 Year Manufacturer's Warranty
  • Please Note: Remote Blower, Ductwork, Work Surface, and Base Cabinet or Stand are required for operation and are NOT INCLUDED

Labconco 110410000 4' Protector XStream Laboratory Hood, 100-115V, 50/60Hz Specifications

Product Subcategory: General Chemistry
Nominal Width: 4'
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
Enclosure Height: 59.0"
Lighting: LED
Style: Benchtop
Estimated Shipping Weight: 440.0 lbs
Estimated Shipping Weight metric: 200.0 kg
Dimensions: 48.0" w x 37.7" d x 59.0" h
Dimensions metric: 121.9 x 95.8 x 149.9 cm
Electrical: 100-115V, 50/60Hz, 10A
Downloads

Why Buy From Marshall Scientific?

Marshall Scientific's primary goal is to enhance your laboratory research at a more affordable price. Our industry-trained customer service team is always here to assist you along every step of your purchase, from initial product questions to technical support, and everything in-between. With our connection to some of the industry's largest manufacturers, we can ensure you receive the lowest price without sacrificing quality whatsoever.

Brand-New Products for Far Less than Retail

Most Pieces Ship within 1 to 3 Business Days

All Products are Fully Warrantied

Trained Customer and Technical Support

Industry Leading Overall Customer Satisfaction

Bausch + Lomb
Working with Marshall Scientific was overall an enjoyable experience. Their customer service really helped me choose the product that fit my needs, and checking out was easier than I expected. Shipping was faster than expected which was also a plus!
James M. / Bausch + Lomb
Caltech
I have purchased a few items from Marshall Scientific over the years and I have always had great experiences with both the products and the customer support. Chat feature definitely makes both communicating and navigating easier. I would recommend this company to a colleague.
Lila B. / Caltech
Sanofi
I just received the two Polyscience chillers I ordered through your ecommerce store and I couldn't be happier with my purchase. Customer service was instrumental in helping me choose the correct model. Thanks again!
Nora F. / Sanofi
Ford
Working with Marshall Scientific has been an exceptional experience. Their team assisted me in selecting the perfect recirculating chiller for my research needs. Their expertise and guidance were invaluable, and I am grateful for their support. Marshall Scientific has been vital to the success of my research endeavors.
Zara K. / Ford
AWS
Collaborating with Marshall Scientific has been a truly exceptional experience. Their fast lead time for centrifuges is unparalleled, and their commitment to quality is evident in every aspect of their service. I would highly recommend them to anyone in need of a reliable and efficient scientific equipment supplier.
Mei L. / AWS
Pfizer
I recently ordered pipettes from Marshall Scientific and was impressed with their great selection and quality. The pipettes were exactly what I needed and worked perfectly. I would definitely order from them again.
Aarav S. / Pfizer
Mayo Clinic
The chat support I received while selecting a thermal cycler was exceptional. The representative was knowledgeable, patient, and helped me choose the perfect product for my needs. I am grateful for their assistance.
Anneliese M. / Mayo Clinic
University of Pennsylvania
I recently purchased a ChemiDoc imaging system from Marshall Scientific and was impressed with the great condition it arrived in. The shipping was professional and the system has been a valuable addition to my scientific research.
Tyler S. / University of Pennsylvania
Massachusetts Institute of Technology
The New Brunswick Incubator Shaker that I ordered from Marshall Scientific has just arrived and I cannot say enough how satisfied I am with my purchase. The shaker works like it came straight from the factory and the longer warranty is definitely a plus. I highly recommend Marshall to anyone looking for a company that stands behind their products.
Xiao L. / MIT
Mass General Hospital
My recently purchased microplate reader from Marshall Scientific has been a much needed addition to my lab. The reader is easy to use and provides accurate and reliable results. I have used it for various experiments including ELISA, cell viability assays, and protein quantification. The reader has greatly improved the efficiency and accuracy of my experiments. Thanks again!
Larisa R. / MGH
Tesla
I purchased a recirculating chiller from Marshall Scientific three months ago and couldn't be happier. The Thermoflex 2500 is a great unit and has been working perfectly. I actually bought three of them and they have exceeded my expectations.
Gavril K. / Tesla
Columbia University
I recently purchased a laboratory freezer from Marshall Scientific and I am very pleased with my purchase. The freezer is of high quality and has been perfect for storing my research samples. I use it mostly for cell culture and protein storage and it seems to do the job just fine. The overall cosmetic condition of the unit is perfect.
Juan M. / Columbia University
Rivian
I would like to extend a thanks to Kyle on the other side of Marshall Scientific's chat feature to help me select the right product for my laboratory needs. Kyle was knowledgeable and helped me choose the perfect equipment for my application. The chat feature was convenient and saved me time. I would definitely use it again in the future.
Yumi S. / Rivian
Quest Diagnostics
I recently received a Vicell cell counter from Marshall Scientific and I must say, I was anxious about making such a large purchase over the internet. However, the product arrived in perfect condition and has exceeded my expectations. I use it for various applications in my lab and it has been incredibly accurate and efficient. The professional shipping was also a plus. I will definitely be purchasing from Marshall Scientific again in the future.
Ethan S. / Quest Diagnostics
Click Here to View Our Other Testimonials

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Brands
Brands > Labconco
Fume Hood Voltage > 115V
Fume Hood Length > 4'
Blower > Integral Blower Required (Not Installed)
Benchtop or Floor > Benchtop
Blower
Fume Hood Voltage
Fume Hood Length
Benchtop or Floor
Fume Hood Depth > 37.7" Deep
Fume Hood Depth
GFCI Outlets > No GFCI Outlet
Sensor > No Sensor
Service Ports > No Service Port
Filter > No HEPA Filter
Sensor
Filter
GFCI Outlets
Service Ports