|
|
|
|
Labconco 111400002 4' Protector XL Benchtop Hood, 31.7" Exterior Depth, with 2 Service Fixtures and 1 GFCI Duplex, 100-115V, 50/60Hz
- By-pass airflow design
- Eco-Foil Air Foil with aerodynamic Clean-Sweep™ airflow openings
- Cord-Keeper™ Slots on left and right side of air foil
- Glacier white powder-coated steel exterior
- Chemical-resistant, fiberglass-reinforced, composite panel liner and baffle
- Opti-Zone™ Baffle with flame spread index less than 25 per ASTM E84. Baffle is removable for cleaning
- Tempered safety glass vertical-rising sash(es) with cable and pulley(s) and powder-coated aluminum sash handle(s). 8' models have optional split dual sashes. 10', 12' and 16' models have split dual sashes (four on 16' models)
- 37.5" (95.3 cm) high sightline from the work surface and header panel
- Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
- Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
- Powder-coated stainless steel, 12.8" (32.5 cm) ID exhaust connection(s)
- 10', 12' and 16' models also feature a by-pass block
The Labconco Protector XL Benchtop Laboratory Hoods are general chemistry hoods that offer superior design flexibility. They are available in widths from 3 to 16 feet and three depths to meet a variety of installation and application requirements. These hoods incorporate containment-enhancing features allowing them to operate at face velocities as low as 60 fpm and meet the SEFA-1 standard of a low velocity high performance hood.
The Labconco 111400002 4' Protector XL Benchtop Hood, 31.7" Exterior Depth, with 2 Service Fixtures and 1 GFCI Duplex, 100-115V, 50/60Hz includes:
- Two Pre-Plumbed Service Fixtures with Forged Brass Valves
- One Pre-Wired GFCI Electrical Duplex Receptacle on Lower Right Side
- Power Cord
- Operator's Guide
- Manufacturer's Documentation
- 1 Year Manufacturer's Warranty
- Please Note: Remote Blower, Ductwork, Work Surface, and Base Cabinet or Stand are required for operation and are NOT INCLUDED
Labconco 111400002 4' Protector XL Benchtop Hood, 31.7" Exterior Depth, with 2 Service Fixtures and 1 GFCI Duplex, 100-115V, 50/60Hz Specifications
Product Subcategory:
|
General Chemistry
|
Nominal Width:
|
4'
|
Blower Requirements:
|
Remote blower required
|
Conformance:
|
ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
|
Electrical Duplexes:
|
1
|
Enclosure Height:
|
59.0"
|
Exterior Depth:
|
31.7" (80.5 cm)
|
Lighting:
|
LED
|
Service Fixtures:
|
2
|
Style:
|
Benchtop
|
Estimated Shipping Weight:
|
375.0 lbs
|
Estimated Shipping Weight metric:
|
170.0 kg
|
Dimensions:
|
48.0" w x 31.7" d x 59.0" h
|
Dimensions metric:
|
121.9 x 80.5 x 149.9 cm
|
Electrical:
|
100-115 volts, 50/60Hz, 10 amps
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Marshall Scientific's primary goal is to enhance your laboratory research at a more affordable price. Our industry-trained customer service team is always here to assist you along every step of your purchase, from initial product questions to technical support, and everything in-between. With our connection to some of the industry's largest manufacturers, we can ensure you receive the lowest price without sacrificing quality whatsoever.
Brand-New Products for Far Less than Retail
Most Pieces Ship within 1 to 3 Business Days
All Products are Fully Warrantied
Trained Customer and Technical Support
Industry Leading Overall Customer Satisfaction
Working with Marshall Scientific was overall an enjoyable experience. Their customer service really helped me choose the product that fit my needs, and checking out was easier than I expected. Shipping was faster than expected which was also a plus!
James M. / Bausch + Lomb
I have purchased a few items from Marshall Scientific over the years and I have always had great experiences with both the products and the customer support. Chat feature definitely makes both communicating and navigating easier. I would recommend this company to a colleague.
Lila B. / Caltech
I just received the two Polyscience chillers I ordered through your ecommerce store and I couldn't be happier with my purchase. Customer service was instrumental in helping me choose the correct model. Thanks again!
Nora F. / Sanofi
Working with Marshall Scientific has been an exceptional experience. Their team assisted me in selecting the perfect recirculating chiller for my research needs. Their expertise and guidance were invaluable, and I am grateful for their support. Marshall Scientific has been vital to the success of my research endeavors.
Zara K. / Ford
Collaborating with Marshall Scientific has been a truly exceptional experience. Their fast lead time for centrifuges is unparalleled, and their commitment to quality is evident in every aspect of their service. I would highly recommend them to anyone in need of a reliable and efficient scientific equipment supplier.
Mei L. / AWS
I recently ordered pipettes from Marshall Scientific and was impressed with their great selection and quality. The pipettes were exactly what I needed and worked perfectly. I would definitely order from them again.
Aarav S. / Pfizer
The chat support I received while selecting a thermal cycler was exceptional. The representative was knowledgeable, patient, and helped me choose the perfect product for my needs. I am grateful for their assistance.
Anneliese M. / Mayo Clinic
I recently purchased a ChemiDoc imaging system from Marshall Scientific and was impressed with the great condition it arrived in. The shipping was professional and the system has been a valuable addition to my scientific research.
Tyler S. / University of Pennsylvania
The New Brunswick Incubator Shaker that I ordered from Marshall Scientific has just arrived and I cannot say enough how satisfied I am with my purchase. The shaker works like it came straight from the factory and the longer warranty is definitely a plus. I highly recommend Marshall to anyone looking for a company that stands behind their products.
Xiao L. / MIT
My recently purchased microplate reader from Marshall Scientific has been a much needed addition to my lab. The reader is easy to use and provides accurate and reliable results. I have used it for various experiments including ELISA, cell viability assays, and protein quantification. The reader has greatly improved the efficiency and accuracy of my experiments. Thanks again!
Larisa R. / MGH
I purchased a recirculating chiller from Marshall Scientific three months ago and couldn't be happier. The Thermoflex 2500 is a great unit and has been working perfectly. I actually bought three of them and they have exceeded my expectations.
Gavril K. / Tesla
I recently purchased a laboratory freezer from Marshall Scientific and I am very pleased with my purchase. The freezer is of high quality and has been perfect for storing my research samples. I use it mostly for cell culture and protein storage and it seems to do the job just fine. The overall cosmetic condition of the unit is perfect.
Juan M. / Columbia University
I would like to extend a thanks to Kyle on the other side of Marshall Scientific's chat feature to help me select the right product for my laboratory needs. Kyle was knowledgeable and helped me choose the perfect equipment for my application. The chat feature was convenient and saved me time. I would definitely use it again in the future.
Yumi S. / Rivian
I recently received a Vicell cell counter from Marshall Scientific and I must say, I was anxious about making such a large purchase over the internet. However, the product arrived in perfect condition and has exceeded my expectations. I use it for various applications in my lab and it has been incredibly accurate and efficient. The professional shipping was also a plus. I will definitely be purchasing from Marshall Scientific again in the future.
Ethan S. / Quest Diagnostics
Click Here to View Our Other Testimonials
|
|
|
|
|
|
|